The number of SMCs configured for the Nest. If running with
only a single SMC, this should be set to 'no' in order to suppress
unecessary alarms.
no (0) Only 1 SMC resides in the Nest.
yes (1) Both SMCs reside in the Nest.
Parsed from file ERI-DNX-NEST-SYS-MIB.mib
Module: ERI-DNX-NEST-SYS-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-NEST-SYS-MIB
[Automatically extracted from oidview.com]
xNestDualSMCs OBJECT-TYPE SYNTAX DecisionType MAX-ACCESS read-write STATUS current DESCRIPTION "The number of SMCs configured for the Nest. If running with only a single SMC, this should be set to 'no' in order to suppress unecessary alarms. no (0) Only 1 SMC resides in the Nest. yes (1) Both SMCs reside in the Nest." ::= { xNestCfgEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.11.1.1.1 | xNestIndex | 0 | 0 | The nest index number in the node. Nests are indexed 0 through 7 but correspond to Nests 1 to 8. |
1.3.6.1.4.1.644.2.4.1.11.1.1.2 | xNestUnitName | 0 | 0 | The user defined name for this nest. |
1.3.6.1.4.1.644.2.4.1.11.1.1.3 | xNestType | 0 | 0 | This is the nest type configured by the user. The value, notConfig(0), is the default type for an unconfigured device. Note, i… |
1.3.6.1.4.1.644.2.4.1.11.1.1.4 | xNestState | 0 | 0 | The current machine state of the Nests. mismatch (2) Nest is configured as wrong type. notPresent (8) Nest is unconfigured. mis… |
1.3.6.1.4.1.644.2.4.1.11.1.1.5 | xNestAlarmStatus | 0 | 0 | The current nest device alarm condition level that indicates it's severity. |
1.3.6.1.4.1.644.2.4.1.11.1.1.6 | xNestDeviceCards | 0 | 0 | The number of device cards presently active in the nest. |
1.3.6.1.4.1.644.2.4.1.11.1.1.7 | xNestNDRCapable | 0 | 0 | The configured N+1 Redundancy state of the Nest. no (0) N+1 Redundancy is not available in the Nest. yes (1) N+1 Redundancy… |
1.3.6.1.4.1.644.2.4.1.11.1.1.8 | xNestAlarmContacts | 0 | 0 | Determines the type of desired response from the rear SMC/XNM Alarm Contact switches during an alarm event. |
1.3.6.1.4.1.644.2.4.1.11.1.1.10 | xNestDualXccXlc | 0 | 0 | The number of XCC devices configured for the Node Manager or number of XLC devices configured for the Nest Manager depending on T… |
1.3.6.1.4.1.644.2.4.1.11.1.1.11 | xNestCmdStatus | 0 | 0 | The command status for this nest configuration row/record. The value used in a SET will be replaced by a response value in the GE… |
1.3.6.1.4.1.644.2.4.1.11.1.1.12 | xNestDualPower | 0 | 0 | The number of DNX Power Supplies configured for the Nest. If running with only a single Power Supply, this should be set to 'no'… |