Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state IDLE
A value of searching(2)- indicates that the PSE State diagram
is in the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or
BACKOFF.
A value of deliveringPower(4) - indicates that the PSE State
diagram is in the state POWER_UP, POWER_ON or POWER_OFF.
A value of fault(5) - indicates that the PSE State diagram is
in the state TEST_ERROR or the state IDLE due to the variable
error condition.
Faults detected are vendor specific.
A value of test(7) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of denyLowPriority(8) indicates that the port was
disabled by the power management system, in order to keep
active higher priority ports.
Parsed from file rfc3621-Power-Ethernet.mib.txt
Company: None
Module: POWER-ETHERNET-MIB
Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram is in
the state IDLE
A value of searching(2)- indicates that the PSE State diagram is in
the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF.
A value of deliveringPower(4) - indicates that the PSE State diagram
is in the state POWER_UP, POWER_ON or POWER_OFF.
A value of fault(5) - indicates that the PSE State diagram is in the
state TEST_ERROR or the state IDLE due to the variable error
condition.
Faults detected are vendor specific.
A value of test(7) - indicates that the PSE State diagram is in the
state TEST_MODE.
A value of denyLowPriority(8) indicates that the port was
disabled by the power management system, in order to keep
active higher priority ports.
Parsed from file POWER-ETHERNET-MIB.mib
Module: POWER-ETHERNET-MIB
Vendor: Alcatel
Module: POWER-ETHERNET-MIB (IETF_HUBMIB_POWER_ETHERNET_DRAFT.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pethPsePortDetectionStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), searching(2), deliveringPower(4), fault(5), test(7), denyLowPriority(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates that the PSE State diagram is in the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF. A value of deliveringPower(4) - indicates that the PSE State diagram is in the state POWER_UP, POWER_ON or POWER_OFF. A value of fault(5) - indicates that the PSE State diagram is in the state TEST_ERROR or the state IDLE due to the variable error condition. Faults detected are vendor specific. A value of test(7) - indicates that the PSE State diagram is in the state TEST_MODE. A value of denyLowPriority(8) indicates that the port was disabled by the power management system, in order to keep active higher priority ports. " ::= { pethPsePortEntry 7 }
pethPsePortDetectionStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), searching(2), deliveringPower(4), fault(5), test(7), denyLowPriority(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates that the PSE State diagram is in the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF. A value of deliveringPower(4) - indicates that the PSE State diagram is in the state POWER_UP, POWER_ON or POWER_OFF. A value of fault(5) - indicates that the PSE State diagram is in the state TEST_ERROR or the state IDLE due to the variable error condition. Faults detected are vendor specific. A value of test(7) - indicates that the PSE State diagram is in the state TEST_MODE. A value of denyLowPriority(8) indicates that the port was disabled by the power management system, in order to keep active higher priority ports. " ::= { pethPsePortEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.1 | pethPsePortGroupIndex | 0 | 0 | This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in th… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.2 | pethPsePortIndex | 0 | 0 | This variable uniquely identifies the power Ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entr… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.3 | pethPsePortAdminEnable | 0 | 0 | true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.4 | pethPsePortPowerPairsControlAbility | 0 | 0 | Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate … |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.5 | pethPsePortPowerPairs | 0 | 0 | Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of … |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.6 | pethPsePortPowerDetectionControl | 0 | 0 | Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. S… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.8 | pethPsePortPowerPriority | 0 | 0 | This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.10 | pethPsePortPowerMaintenanceStatus | 0 | 0 | The value ok(1) indicates the Power Maintenance Signature is present and the overcurrent condition has not been detected. The valu… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.11 | pethPsePortMPSAbsentCounter, pethPsePortInvalidSignatureCounter | 0 | 0 | This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID. |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.12 | pethPsePortOverCurrentCounter, pethPsePortPowerDeniedCounter | 0 | 0 | Counts the number of times that the aPSEPowerCurrentStatus attribute changes from any value to the value overCurrent(2). |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.13 | pethPsePortType, pethPsePortOverLoadCounter | 0 | 0 | A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This… |
| 1.3.6.1.4.1.6486.800.1.2.1.27.999.1.1.1.14 | pethPsePortPowerClassifications, pethPsePortShortCounter | 0 | 0 | Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices su… |