An entry in the ACTDAX cross-connect matrix table.
Parsed from file ACTDAXL3.MIB.txt
Company: cai
Module: ADTRAN-ACTDAXL3-MIB
Vendor: Adtran
Module: ADTRAN-ACTDAXL3-MIB
[Automatically extracted from oidview.com]
adDAX3connEntry OBJECT-TYPE SYNTAX AdDAX3connEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ACTDAX cross-connect matrix table." INDEX { adDAXFromPort, adDAXFromChannel } ::= { adDAX3connTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.4.1.1 | adDAXFromPort | 0 | 0 | This object is the identifier of one of the three ports. The ACTDAX serves a a cross-point matrix switch between 72 total DS0 cha… |
1.3.6.1.4.1.664.2.9.4.1.2 | adDAXFromChannel | 0 | 0 | This object is the identifier of one of the 24 channels in the DS1 port identified by adDAXFromPort. For 'a1' or 'b1' this objec… |
1.3.6.1.4.1.664.2.9.4.1.3 | adDAXConnStatus | 0 | 0 | The Connection Status for the channel. 'unmapped' indicates that the channel is not connected. 'connected' indicates that the cha… |
1.3.6.1.4.1.664.2.9.4.1.4 | adDAXToPort | 0 | 0 | The port of the DS0 channel connected to the channel indicated by adDAXFromPort and adDAXFromChannel. The three possible ports a… |
1.3.6.1.4.1.664.2.9.4.1.5 | adDAXToChannel | 0 | 0 | The channel in adDAXToPort that is connected to the channel indicated by adDAXFromPort and adDAXFromChannel. |
1.3.6.1.4.1.664.2.9.4.1.6 | adDAXCircuitType | 0 | 0 | The ciruit type for the connection. The ciruit type will determine the settings for adDAXSgnlState, adDAXTroubleInsert, adDAXTro… |
1.3.6.1.4.1.664.2.9.4.1.7 | adDAXTermination | 0 | 0 | The termination status of the circuit. Terminating the circuit in one direction is equivalent to not connecting the circuit in t… |
1.3.6.1.4.1.664.2.9.4.1.8 | adDAXSgnlState | 0 | 0 | The signaling state of the circuit. 'transparent' indicates that no signal bit robbing is performed. 'state2' indicates that the A… |
1.3.6.1.4.1.664.2.9.4.1.9 | adDAXTroubleInsert | 0 | 0 | If the source channel's port is in an alarm state, the the Trouble Insertion Code will be inserted toward the DS0 channel in plac… |
1.3.6.1.4.1.664.2.9.4.1.10 | adDAXTroubleCode | 0 | 0 | The Trouble Insertion Code that will be inserted toward a DS0 channel instead of outgoing data when the source channels's port is… |
1.3.6.1.4.1.664.2.9.4.1.11 | adDAXFromTC | 0 | 0 | The trunk conditioning bits that will be inserted in the From channel in place of received signaling bits during an alarm state o… |
1.3.6.1.4.1.664.2.9.4.1.12 | adDAXToTC | 0 | 0 | The trunk conditioning bits that will be inserted in the To channel in place of received signaling bits during an alarm state on … |
1.3.6.1.4.1.664.2.9.4.1.13 | adDAXUAC | 0 | 0 | The Unassigned Channel Code (UAC) is transmitted towards the From channel when the channel is not not assigned to a connection, o… |
1.3.6.1.4.1.664.2.9.4.1.14 | adDAXZeroCodeSuppress | 0 | 0 | This object indicates if Zero Code Suppression is enabled or disabled for the from channel. If Zero Code Suppression is enabled,… |
1.3.6.1.4.1.664.2.9.4.1.15 | adDAXlastSetResponse | 0 | 0 | The response to the last set operation performed on an object in this table. The repsonse indicates either SUCCESS or an explana… |