This object indicates if Zero Code Suppression is enabled
or disabled for the from channel. If Zero Code Suppression
is enabled, zero bytes transmitted from the DS1 interface
for this channel will be replaced with the code '00000010'.
Zero Code Suppression does not apply to DS0 channels in the
'a0' port.
Parsed from file ACTDAXL3.MIB.txt
Company: cai
Module: ADTRAN-ACTDAXL3-MIB
Vendor: Adtran
Module: ADTRAN-ACTDAXL3-MIB
[Automatically extracted from oidview.com]
adDAXZeroCodeSuppress OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if Zero Code Suppression is enabled or disabled for the from channel. If Zero Code Suppression is enabled, zero bytes transmitted from the DS1 interface for this channel will be replaced with the code '00000010'. Zero Code Suppression does not apply to DS0 channels in the 'a0' port." ::= { adDAX3connEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.4.1.1 | adDAXFromPort | 0 | 0 | This object is the identifier of one of the three ports. The ACTDAX serves a a cross-point matrix switch between 72 total DS0 cha… |
1.3.6.1.4.1.664.2.9.4.1.2 | adDAXFromChannel | 0 | 0 | This object is the identifier of one of the 24 channels in the DS1 port identified by adDAXFromPort. For 'a1' or 'b1' this objec… |
1.3.6.1.4.1.664.2.9.4.1.3 | adDAXConnStatus | 0 | 0 | The Connection Status for the channel. 'unmapped' indicates that the channel is not connected. 'connected' indicates that the cha… |
1.3.6.1.4.1.664.2.9.4.1.4 | adDAXToPort | 0 | 0 | The port of the DS0 channel connected to the channel indicated by adDAXFromPort and adDAXFromChannel. The three possible ports a… |
1.3.6.1.4.1.664.2.9.4.1.5 | adDAXToChannel | 0 | 0 | The channel in adDAXToPort that is connected to the channel indicated by adDAXFromPort and adDAXFromChannel. |
1.3.6.1.4.1.664.2.9.4.1.6 | adDAXCircuitType | 0 | 0 | The ciruit type for the connection. The ciruit type will determine the settings for adDAXSgnlState, adDAXTroubleInsert, adDAXTro… |
1.3.6.1.4.1.664.2.9.4.1.7 | adDAXTermination | 0 | 0 | The termination status of the circuit. Terminating the circuit in one direction is equivalent to not connecting the circuit in t… |
1.3.6.1.4.1.664.2.9.4.1.8 | adDAXSgnlState | 0 | 0 | The signaling state of the circuit. 'transparent' indicates that no signal bit robbing is performed. 'state2' indicates that the A… |
1.3.6.1.4.1.664.2.9.4.1.9 | adDAXTroubleInsert | 0 | 0 | If the source channel's port is in an alarm state, the the Trouble Insertion Code will be inserted toward the DS0 channel in plac… |
1.3.6.1.4.1.664.2.9.4.1.10 | adDAXTroubleCode | 0 | 0 | The Trouble Insertion Code that will be inserted toward a DS0 channel instead of outgoing data when the source channels's port is… |
1.3.6.1.4.1.664.2.9.4.1.11 | adDAXFromTC | 0 | 0 | The trunk conditioning bits that will be inserted in the From channel in place of received signaling bits during an alarm state o… |
1.3.6.1.4.1.664.2.9.4.1.12 | adDAXToTC | 0 | 0 | The trunk conditioning bits that will be inserted in the To channel in place of received signaling bits during an alarm state on … |
1.3.6.1.4.1.664.2.9.4.1.13 | adDAXUAC | 0 | 0 | The Unassigned Channel Code (UAC) is transmitted towards the From channel when the channel is not not assigned to a connection, o… |
1.3.6.1.4.1.664.2.9.4.1.15 | adDAXlastSetResponse | 0 | 0 | The response to the last set operation performed on an object in this table. The repsonse indicates either SUCCESS or an explana… |