System temperature has returned to an
acceptable value.
Parsed from file netapp_2_2_2.mib.txt
Company: None
Module: NETAPP-MIB
System temperature has returned to an
acceptable value.
Parsed from file NETWORK-APPLIANCE-MIB.mib
Module: NETWORK-APPLIANCE-MIB
Vendor: Network Appliance Corporation
Module: NETWORK-APPLIANCE-MIB
[Automatically extracted from oidview.com]
overTempRepaired NOTIFICATION-TYPE OBJECTS {productTrapData, productSerialNum} STATUS current DESCRIPTION "System temperature has returned to an acceptable value." ::= { netapp 0 96 }
overTempRepaired NOTIFICATION-TYPE OBJECTS {productTrapData, productSerialNum} STATUS current DESCRIPTION "System temperature has returned to an acceptable value." ::= { netapp 0 96 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.789.0.46 | powerSupplyRepaired | 0 | 0 | Previously-failed power supplies or power rails have been repaired. |
1.3.6.1.4.1.789.0.55 | cpuTooBusy | 0 | 0 | CPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.e… |
1.3.6.1.4.1.789.0.56 | cpuOk | 0 | 0 | CPU utilization has dropped back below 90%. |
1.3.6.1.4.1.789.0.62 | nvramBatteryDischarged | 0 | 0 | The NVRAM battery is fully discharged. |
1.3.6.1.4.1.789.0.63 | nvramBatteryLow | 0 | 0 | The charge in the NVRAM battery is low. |
1.3.6.1.4.1.789.0.72 | clusterNodeFailed | 0 | 0 | A node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node. |
1.3.6.1.4.1.789.0.75 | clusterNodeTakenOver | 0 | 0 | The partner has taken over for a failed cluster node. |
1.3.6.1.4.1.789.0.76 | clusterNodeRepaired | 0 | 0 | A cluster node has resumed operation. |
1.3.6.1.4.1.789.0.77 | clusterNodeRepairing | 0 | 0 | A cluster node has rebooted, and a giveback has started. |
1.3.6.1.4.1.789.0.82 | volumeFull | 0 | 0 | At least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the … |
1.3.6.1.4.1.789.0.85 | volumeNearlyFull | 0 | 0 | At least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the … |
1.3.6.1.4.1.789.0.86 | volumeRepaired | 0 | 0 | All volumes are now under 95% full. |
1.3.6.1.4.1.789.0.87 | volumesStillFull | 0 | 0 | At least one volume that was full or nearly full is now OK, but more volumes still exceed the volumeNearlyFull or volumeFull thre… |
1.3.6.1.4.1.789.0.91 | overTempShutdown | 0 | 0 | System temperature is too high to continue operating. The system is shutting down. |
1.3.6.1.4.1.789.0.95 | overTemp | 0 | 0 | System temperature is too high and in the warning level. |
1.3.6.1.4.1.789.0.103 | shelfFault | 0 | 0 | A disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature. |
1.3.6.1.4.1.789.0.106 | shelfRepaired | 0 | 0 | A previously-reported shelf fault is now corrected. |
1.3.6.1.4.1.789.0.111 | globalStatusNonRecoverable | 0 | 0 | The appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down. |
1.3.6.1.4.1.789.0.113 | globalStatusCritical | 0 | 0 | The appliance's overall status changed to 'critical', indicating a problem that needs immediate attention. |
1.3.6.1.4.1.789.0.115 | globalStatusNonCritical | 0 | 0 | The appliance's overall status changed to 'nonCritical', indicating a problem that needs attention. |
1.3.6.1.4.1.789.0.116 | globalStatusOk | 0 | 0 | The appliance's overall status returned to normal. |
1.3.6.1.4.1.789.0.126 | softQuotaExceeded | 0 | 0 | A user has exceeded their soft quota limit. |
1.3.6.1.4.1.789.0.127 | softQuotaNormal | 0 | 0 | A user is safely back under their soft quota limit. |
1.3.6.1.4.1.789.0.134 | autosupportSendError | 0 | 0 | Unable to send autosupport. The trap includes a string describing the reason for the failure. |
1.3.6.1.4.1.789.0.135 | autosupportConfigurationError | 0 | 0 | Autosupport may be configured incorrectly. The trap includes a string describing the mis-configuration. |
1.3.6.1.4.1.789.0.136 | autosupportSent | 0 | 0 | Autosupport was sent successfully. |
1.3.6.1.4.1.789.0.142 | upsLinePowerOff | 0 | 0 | UPS: Input line power has failed and UPS is now on battery. |
1.3.6.1.4.1.789.0.143 | upsBatteryCritical | 0 | 0 | UPS: Battery is nearly exhausted, starting graceful shutdown. |
1.3.6.1.4.1.789.0.144 | upsShuttingDown | 0 | 0 | UPS: Shutting down now: Time left on battery is exhuasted. |
1.3.6.1.4.1.789.0.145 | upsBatteryWarning | 0 | 0 | UPS: Warning: Time left on battery is getting critical. |
1.3.6.1.4.1.789.0.146 | upsLinePowerRetored, upsLinePowerRestored | 0 | 0 | UPS: Input line power has been restored and UPS is now off battery. |
... |