Notifications
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.789.0.2 | userDefined | 0 | 0 | A polling-style trap built using the 'snmp traps' command on the filer. |
| 1.3.6.1.4.1.789.0.6 | dhmNoticeDegradedIO | 0 | 0 | Disk Health Monitor - Reported a Disk Degraded-I/O Event |
| 1.3.6.1.4.1.789.0.7 | dhmNoticePFAEvent | 0 | 0 | Disk Health Monitor - Reported a Disk Predictive-Failure Event |
| 1.3.6.1.4.1.789.0.11 | emergencyTrap | 0 | 0 | A user-defined trap indicating an extremely urgent situation, usually indicating that the system has failed and is shutting down. |
| 1.3.6.1.4.1.789.0.12 | alertTrap | 0 | 0 | A user-defined trap indicating a condition that should be corrected immediately, such as a failed disk. |
| 1.3.6.1.4.1.789.0.13 | criticalTrap | 0 | 0 | A user-defined trap indicating a critical condition, such as a hard device error. |
| 1.3.6.1.4.1.789.0.14 | errorTrap | 0 | 0 | A user-defined trap indicating an error condition, such as a mistake in a configuration file. |
| 1.3.6.1.4.1.789.0.15 | warningTrap | 0 | 0 | A user-defined trap indicating a condition which is not an error, but which may require special handling. |
| 1.3.6.1.4.1.789.0.16 | notificationTrap | 0 | 0 | A user-defined trap meant to provide notification, such as an hourly uptime message. |
| 1.3.6.1.4.1.789.0.17 | informationalTrap | 0 | 0 | A user-defined trap used for informational purposes. |
| 1.3.6.1.4.1.789.0.18 | dbgTrap | 0 | 0 | A user-defined trap used for debugging purposes. This trap was previously mis-documented as being trap number 17, with the name d… |
| 1.3.6.1.4.1.789.0.21 | diskFailedShutdown | 0 | 0 | System is shutting down because the system has been running in degraded mode for 24 hours. The trap includes a string describing … |
| 1.3.6.1.4.1.789.0.22 | diskFailed | 0 | 0 | One or more disks failed. The trap includes a string describing the failed disk(s). |
| 1.3.6.1.4.1.789.0.26 | diskRepaired | 0 | 0 | The failed disks have been repaired. This trap is a placeholder - it is not currently sent by Data ONTAP. |
| 1.3.6.1.4.1.789.0.31 | fanFailureShutdown | 0 | 0 | Critical chassis or cpu fans have failed and the system is shutting down. |
| 1.3.6.1.4.1.789.0.33 | fanFailed | 0 | 0 | One or more chassis fans failed. The trap includes a string describing the failed fan(s). |
| 1.3.6.1.4.1.789.0.35 | fanWarning | 0 | 0 | One or more chassis or cpu fans are in warning state. The trap includes a string describing the fan(s) in the warning state. |
| 1.3.6.1.4.1.789.0.36 | fanRepaired | 0 | 0 | All fans are repaired. |
| 1.3.6.1.4.1.789.0.41 | powerSupplyFailureShutdown | 0 | 0 | Critical power supplies or power rails failed and the system is shutting down. |
| 1.3.6.1.4.1.789.0.43 | powerSupplyFailed | 0 | 0 | One or more redundant power supplies failed. Include in the trap a string describing the failed power supply(ies). |
| 1.3.6.1.4.1.789.0.45 | powerSupplyWarning | 0 | 0 | One or more power supplies or power rails in warning state. Include in the trap a string describing the power supply(ies) or the… |
| 1.3.6.1.4.1.789.0.46 | powerSupplyRepaired | 0 | 0 | Previously-failed power supplies or power rails have been repaired. |
| 1.3.6.1.4.1.789.0.55 | cpuTooBusy | 0 | 0 | CPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.e… |
| 1.3.6.1.4.1.789.0.56 | cpuOk | 0 | 0 | CPU utilization has dropped back below 90%. |
| 1.3.6.1.4.1.789.0.62 | nvramBatteryDischarged | 0 | 0 | The NVRAM battery is fully discharged. |
| 1.3.6.1.4.1.789.0.63 | nvramBatteryLow | 0 | 0 | The charge in the NVRAM battery is low. |
| 1.3.6.1.4.1.789.0.72 | clusterNodeFailed | 0 | 0 | A node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node. |
| 1.3.6.1.4.1.789.0.75 | clusterNodeTakenOver | 0 | 0 | The partner has taken over for a failed cluster node. |
| 1.3.6.1.4.1.789.0.76 | clusterNodeRepaired | 0 | 0 | A cluster node has resumed operation. |
| 1.3.6.1.4.1.789.0.77 | clusterNodeRepairing | 0 | 0 | A cluster node has rebooted, and a giveback has started. |
| 1.3.6.1.4.1.789.0.82 | volumeFull | 0 | 0 | At least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the … |
| 1.3.6.1.4.1.789.0.85 | volumeNearlyFull | 0 | 0 | At least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the … |
| 1.3.6.1.4.1.789.0.86 | volumeRepaired | 0 | 0 | All volumes are now under 95% full. |
| 1.3.6.1.4.1.789.0.87 | volumesStillFull | 0 | 0 | At least one volume that was full or nearly full is now OK, but more volumes still exceed the volumeNearlyFull or volumeFull thre… |
| 1.3.6.1.4.1.789.0.91 | overTempShutdown | 0 | 0 | System temperature is too high to continue operating. The system is shutting down. |
| 1.3.6.1.4.1.789.0.95 | overTemp | 0 | 0 | System temperature is too high and in the warning level. |
| 1.3.6.1.4.1.789.0.96 | overTempRepaired | 0 | 0 | System temperature has returned to an acceptable value. |
| 1.3.6.1.4.1.789.0.103 | shelfFault | 0 | 0 | A disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature. |
| 1.3.6.1.4.1.789.0.106 | shelfRepaired | 0 | 0 | A previously-reported shelf fault is now corrected. |
| 1.3.6.1.4.1.789.0.111 | globalStatusNonRecoverable | 0 | 0 | The appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down. |
| 1.3.6.1.4.1.789.0.113 | globalStatusCritical | 0 | 0 | The appliance's overall status changed to 'critical', indicating a problem that needs immediate attention. |
| 1.3.6.1.4.1.789.0.115 | globalStatusNonCritical | 0 | 0 | The appliance's overall status changed to 'nonCritical', indicating a problem that needs attention. |
| 1.3.6.1.4.1.789.0.116 | globalStatusOk | 0 | 0 | The appliance's overall status returned to normal. |
| 1.3.6.1.4.1.789.0.126 | softQuotaExceeded | 0 | 0 | A user has exceeded their soft quota limit. |
| 1.3.6.1.4.1.789.0.127 | softQuotaNormal | 0 | 0 | A user is safely back under their soft quota limit. |
| 1.3.6.1.4.1.789.0.134 | autosupportSendError | 0 | 0 | Unable to send autosupport. The trap includes a string describing the reason for the failure. |
| 1.3.6.1.4.1.789.0.135 | autosupportConfigurationError | 0 | 0 | Autosupport may be configured incorrectly. The trap includes a string describing the mis-configuration. |
| 1.3.6.1.4.1.789.0.136 | autosupportSent | 0 | 0 | Autosupport was sent successfully. |
| 1.3.6.1.4.1.789.0.142 | upsLinePowerOff | 0 | 0 | UPS: Input line power has failed and UPS is now on battery. |
| 1.3.6.1.4.1.789.0.143 | upsBatteryCritical | 0 | 0 | UPS: Battery is nearly exhausted, starting graceful shutdown. |
| 1.3.6.1.4.1.789.0.144 | upsShuttingDown | 0 | 0 | UPS: Shutting down now: Time left on battery is exhuasted. |
| 1.3.6.1.4.1.789.0.145 | upsBatteryWarning | 0 | 0 | UPS: Warning: Time left on battery is getting critical. |
| 1.3.6.1.4.1.789.0.146 | upsLinePowerRetored, upsLinePowerRestored | 0 | 0 | UPS: Input line power has been restored and UPS is now off battery. |
| 1.3.6.1.4.1.789.0.151 | appEmergency | 0 | 0 | The application encountered an extremely urgent situation and requires an immediate response. |
| 1.3.6.1.4.1.789.0.152 | appAlert | 0 | 0 | The application is in a condition that should be corrected immediately. |
| 1.3.6.1.4.1.789.0.153 | appCritical | 0 | 0 | The application encountered a critical condition. |
| 1.3.6.1.4.1.789.0.154 | appError | 0 | 0 | The application encountered an error condition. |
| 1.3.6.1.4.1.789.0.155 | appWarning | 0 | 0 | The application is in a condition which is not an error, but which may require special handling. |
| 1.3.6.1.4.1.789.0.156 | appNotice | 0 | 0 | The application is notifing of a certain event. |
| 1.3.6.1.4.1.789.0.157 | appInfo | 0 | 0 | The application's message is meant for informational purposes. |
| 1.3.6.1.4.1.789.0.158 | appTrap | 0 | 0 | The application requires to be debugged. |
| 1.3.6.1.4.1.789.0.162 | alfFilewrap | 0 | 0 | The internal audit file has wrapped. You are currently losing event records. Warning the user. |
| 1.3.6.1.4.1.789.0.166 | alfFileSaved | 0 | 0 | The internal audit log has been autosaved to an external evt file. Notifying the user. |
| 1.3.6.1.4.1.789.0.167 | alfFileNearlyFull | 0 | 0 | The internal audit log file is nearly full. The file is going to wrap. Notifying the user. |
| 1.3.6.1.4.1.789.0.176 | quotaExceeded | 0 | 0 | One of the quota limits has been exceeded. The trap includes a string describing the specific event which triggered the trap. Th… |
| 1.3.6.1.4.1.789.0.177 | quotaNormal | 0 | 0 | One of the quota limits has gone back down to a normal level. The trap includes a string describing the specific event which trig… |
| 1.3.6.1.4.1.789.0.186 | waflDirNearlyFull | 0 | 0 | The directory has surpassed 90% of its sub-directory limit. The priority of waflDirFull and this trap are out of order for backwa… |
| 1.3.6.1.4.1.789.0.187 | waflDirFull | 0 | 0 | The directory has been filled to its limit |
| 1.3.6.1.4.1.789.0.192 | eccSummary | 0 | 0 | Memory ECC: number of new correctable ECC errors |
| 1.3.6.1.4.1.789.0.195 | eccMasked | 0 | 0 | Memory ECC: High frequency of ECC errors |
| 1.3.6.1.4.1.789.0.204 | ftpdError | 0 | 0 | Ftp daemon: service stopped |
| 1.3.6.1.4.1.789.0.206 | ftpdMaxConnNotice | 0 | 0 | Ftp daemon: number of connections hits maximum number |
| 1.3.6.1.4.1.789.0.216 | ftpdMaxConnThresholdNotice | 0 | 0 | Ftp daemon: number of connections nearly hits maximum number |
| 1.3.6.1.4.1.789.0.222 | scsitgtFCPLinkBreak | 0 | 0 | SCSI Target: Link Break on FCP adapter |
| 1.3.6.1.4.1.789.0.224 | scsitgtPartnerPathMisconfigured | 0 | 0 | SCSI Target: FCP Partner Path Misconfigured |
| 1.3.6.1.4.1.789.0.226 | scsitgtThrottleNotice | 0 | 0 | SCSI Target: Throttle limit event notification |
| 1.3.6.1.4.1.789.0.237 | vifPrimaryLinkFailed | 0 | 0 | Vif: The primary Interface on a Single mode vif has failed |
| 1.3.6.1.4.1.789.0.238 | vifAllLinksFailed | 0 | 0 | Vif: All the links of the vif have failed |
| 1.3.6.1.4.1.789.0.245 | vfStopped | 0 | 0 | A vFiler has stopped. |
| 1.3.6.1.4.1.789.0.246 | vfStarted | 0 | 0 | A vFiler has started. |
| 1.3.6.1.4.1.789.0.254 | vscanVirusDetectedError | 0 | 0 | VScan: A virus scanner has detected a virus on the Filer |
| 1.3.6.1.4.1.789.0.255 | vscanDisConnection | 0 | 0 | VScan: A virus scanner has dropped its connection from the Filer |
| 1.3.6.1.4.1.789.0.256 | vscanConfigurationChange | 0 | 0 | VScan: There has been a change to the vscan configuration |
| 1.3.6.1.4.1.789.0.257 | vscanConnection | 0 | 0 | VScan: A virus scanner has made a connection to the Filer |
| 1.3.6.1.4.1.789.0.266 | vscanServerUpgrade | 0 | 0 | VScan: The Vscan server has been upgraded |
| 1.3.6.1.4.1.789.0.272 | volumeRestrictedByMirrorBigIo | 0 | 0 | A volume that experienced a medium error during reconstruction is restricted and marked wafl-inconsistent, but starting wafliron … |
| 1.3.6.1.4.1.789.0.274 | volumeInconsistentUmount | 0 | 0 | This trap is issued when we unmount a volume due to an inconsistency. |
| 1.3.6.1.4.1.789.0.275 | volumeStateChanged | 0 | 0 | Volume is being taken offline or being restricted. The string sent with trap specifies name of affected volume and its state. |
| 1.3.6.1.4.1.789.0.276 | volumeOnline | 0 | 0 | Volume is online now. The string sent with trap specifies name of volume which is online now. |
| 1.3.6.1.4.1.789.0.283 | rmcCardNeedsReplacement | 0 | 0 | Remote Management Controller card needs replacement. The trap includes a string specifying the reason for replacement |
| 1.3.6.1.4.1.789.0.284 | rmcCardMissingCables | 0 | 0 | Remote Management Controller card is missing its internal cable, or LAN cable or power supply cable. The trap includes a string s… |
| 1.3.6.1.4.1.789.0.294 | volumeRemoteUnreachable | 0 | 0 | Local volume encountered an error while communicating to remote volume. |
| 1.3.6.1.4.1.789.0.296 | volumeRemoteOk | 0 | 0 | The communication between remote volume and local volume returned to normal. |
| 1.3.6.1.4.1.789.0.297 | volumeRemoteRestored | 0 | 0 | The data on remote volume has been fully restored to local volume. |
| 1.3.6.1.4.1.789.0.298 | volumeRemoteRestoreBegin | 0 | 0 | The data on remote volume has started being restored to local volume by Restore-on-Demand. |
| 1.3.6.1.4.1.789.0.304 | volumeRestrictedRootConflict | 0 | 0 | Volume is restricted due to a root volume conflict. The string sent with trap specifies name of conflicting volume which is being… |
| 1.3.6.1.4.1.789.0.314 | volumeOfflineTooBig | 0 | 0 | Volume can not be brought online because its raw size is larger than maximum allowed size. The string sent with trap specifies na… |
| 1.3.6.1.4.1.789.0.324 | volumeOffline | 0 | 0 | Volume is being taken offline. The string sent with trap specifies name of affected volume and reason for being taken offline. |
| 1.3.6.1.4.1.789.0.334 | volumeRestricted | 0 | 0 | Volume is being restricted. The string sent with trap specifies name of affected volume and reason for being restricted. |
| 1.3.6.1.4.1.789.0.344 | volumeDegradedDirty | 0 | 0 | Volume is degraded and has dirty parity. WAFL_check must be run on this volume before it can be brought online. The string sent w… |
| 1.3.6.1.4.1.789.0.354 | volumeError | 0 | 0 | This trap is issued when a volume can not be brought online due to an error. The string sent with trap specifies name of affecte… |
| 1.3.6.1.4.1.789.0.356 | volumeSelectedRootConflict | 0 | 0 | This trap is issued when multiple root volumes are detected at boot time and one is selected as the root by default. The string s… |
| 1.3.6.1.4.1.789.0.364 | snapmirrorSyncFailed | 0 | 0 | Synchronous SnapMirror failed and went into asynchronous mode. |
| 1.3.6.1.4.1.789.0.366 | snapmirrorSyncOk | 0 | 0 | Synchronous SnapMirror went into synchronous mode. |
| 1.3.6.1.4.1.789.0.371 | chassisTemperatureShutdown | 0 | 0 | The chassis temperature is extreme. The appliance has initiated a shutdown to protect itself. The operating environment should … |
| 1.3.6.1.4.1.789.0.372 | chassisTemperatureWarning | 0 | 0 | The chassis temperature is either too high or too low. The temperature should be monitored and, if possible, corrected. |
| 1.3.6.1.4.1.789.0.375 | chassisTemperatureUnknown | 0 | 0 | The chassis temperature is unknown, because reading can't be obtained from the chassis temperature sensor. |
| 1.3.6.1.4.1.789.0.376 | chassisTemperatureOk | 0 | 0 | The chassis temperature is OK. |
| 1.3.6.1.4.1.789.0.381 | chassisCPUFanStopped | 0 | 0 | One or more CPU fans have stopped. The appliance has initiated a shutdown to protect itself. A new motherboard may be required … |
| 1.3.6.1.4.1.789.0.383 | chassisCPUFanSlow | 0 | 0 | A CPU fan is spinning too slowly. A new motherboard may be required to correct the fan. Contact customer support for direction. |
| 1.3.6.1.4.1.789.0.386 | chassisCPUFanOk | 0 | 0 | All CPU fan(s) are properly functioning. |
| 1.3.6.1.4.1.789.0.391 | chassisPowerSuppliesFailed | 0 | 0 | Multiple chassis power supplies failed. |
| 1.3.6.1.4.1.789.0.392 | chassisPowerSupplyDegraded | 0 | 0 | One or more chassis power supplies are degraded. A description of the degraded state has been logged to the console and message l… |
| 1.3.6.1.4.1.789.0.393 | chassisPowerSupplyFailed | 0 | 0 | One chassis power supply failed. |
| 1.3.6.1.4.1.789.0.394 | chassisPowerSupplyRemoved | 0 | 0 | One or more chassis power supplies are removed. |
| 1.3.6.1.4.1.789.0.395 | chassisPowerSupplyOff | 0 | 0 | One or more chassis power supplies are off. |
| 1.3.6.1.4.1.789.0.396 | chassisPowerSuppliesOk | 0 | 0 | The chassis power supplies are all functioning properly. |
| 1.3.6.1.4.1.789.0.397 | chassisPowerSupplyOk | 0 | 0 | This chassis power supply is functioning properly. |
| 1.3.6.1.4.1.789.0.403 | chassisPowerDegraded | 0 | 0 | The power within the chassis is degraded. A description of the degraded state has been logged to the console and message log file. |
| 1.3.6.1.4.1.789.0.406 | chassisPowerOk | 0 | 0 | The power within the chassis is functioning properly. |
| 1.3.6.1.4.1.789.0.412 | chassisFanDegraded | 0 | 0 | A chassis fan has been degraded. |
| 1.3.6.1.4.1.789.0.413 | chassisFanRemoved | 0 | 0 | A chassis fan FRU has been removed. |
| 1.3.6.1.4.1.789.0.414 | chassisFanStopped | 0 | 0 | One or more chassis fans have stopped. |
| 1.3.6.1.4.1.789.0.415 | chassisFanWarning | 0 | 0 | One or more chassis fans is spinning slowly or too fast. |
| 1.3.6.1.4.1.789.0.416 | chassisFanOk | 0 | 0 | All chassis fans are functioning properly. |
| 1.3.6.1.4.1.789.0.424 | writeVerificationFailed | 0 | 0 | A write has failed a verification test on a SnapValidator enabled volume. |
| 1.3.6.1.4.1.789.0.434 | prefDCDisconnect | 0 | 0 | All connections to domain controllers in the preferred domain controllers list have been lost. |
| 1.3.6.1.4.1.789.0.435 | domainControllerDisconnect | 0 | 0 | A CIFS domain controller connection to the filer has failed. |
| 1.3.6.1.4.1.789.0.436 | dcPasswdChangeFailed | 0 | 0 | An attempt to change the filer's password with the domain controller has failed. |
| 1.3.6.1.4.1.789.0.437 | domainControllerConnected | 0 | 0 | A CIFS domain controller connection to the filer has been established. |
| 1.3.6.1.4.1.789.0.444 | plexFailed | 0 | 0 | This trap is issued when one plex of a mirrored traditional volume or aggregate is failed. The string sent with this trap specifi… |
| 1.3.6.1.4.1.789.0.454 | plexOffline | 0 | 0 | This trap is issued when a plex becomes offline. The string sent with this trap specifies name of affected plex or mirrored tradi… |
| 1.3.6.1.4.1.789.0.464 | shelfSESElectronicsFailed | 0 | 0 | One or more of the enclosure services devices in a disk shelf has failed. Some shelf designs combine the enclosure monitoring ha… |
| 1.3.6.1.4.1.789.0.467 | shelfSESElectronicsInfo | 0 | 0 | A previously reported failure of an enclosure services device in a disk shelf has been corrected, or the device has reported info… |
| 1.3.6.1.4.1.789.0.473 | shelfIFModuleFailed | 0 | 0 | One or more of the storage interface modules in a disk shelf has failed. Some shelf designs combine the enclosure monitoring har… |
| 1.3.6.1.4.1.789.0.475 | shelfIFModuleWarning | 0 | 0 | One or more of the storage interface modules in a disk shelf has a warning condition. Some shelf designs combine the enclosure m… |
| 1.3.6.1.4.1.789.0.477 | shelfIFModuleInfo | 0 | 0 | A previously reported failure of a disk shelf interface module has been corrected, or the module has reported information that do… |
| 1.3.6.1.4.1.789.0.482 | maxDirSizeAlert | 0 | 0 | A directory has reached its maxdirsize limit. Either increase the maxdirsize or clean up the directory. |
| 1.3.6.1.4.1.789.0.485 | maxDirSizeWarning | 0 | 0 | A directory is getting close to its maxdirsize limit. Either increase the maxdirsize or clean up the directory. |
| 1.3.6.1.4.1.789.0.497 | cifsStatsExhaustMemCtrlBlk | 0 | 0 | A request for a CIFS control block can not be granted. All control blocks are in use. |
| 1.3.6.1.4.1.789.0.501 | chassisPSRemovedxMinShutdown | 0 | 0 | Power Supply Unit is removed from the system. System will be shutdown in x minutes if it is not put back. |
| 1.3.6.1.4.1.789.0.505 | chassisPSUsMismatch | 0 | 0 | Power Supply Units in the system are of different type. Please replace them with correct Power Supply Units. |
| 1.3.6.1.4.1.789.0.511 | chassisFanFailxMinShutdown | 0 | 0 | Multiple chassis fan failure. System will shut down in a few minutes if not corrected. |
| 1.3.6.1.4.1.789.0.515 | chassisPSUwrongInput | 0 | 0 | Power Supply Unit (PSU) in the system is connected to an incompatible external power source. Please change the power source being… |
| 1.3.6.1.4.1.789.0.521 | powerSupplyFanFailxMinShutdown | 0 | 0 | Multiple power supply fans failure. System will shut down in a few minutes if not corrected. |
| 1.3.6.1.4.1.789.0.532 | remoteSystemMgtAlert | 0 | 0 | system remote management detected a system down event. The trap includes a string describing the specific event which triggered t… |
| 1.3.6.1.4.1.789.0.535 | remoteSystemMgmtWarning | 0 | 0 | system remote management detected a system down event. The trap includes a string describing the specific event which triggered t… |
| 1.3.6.1.4.1.789.0.536 | remoteSystemMgmtNotification | 0 | 0 | system remote management detected a system down event. The trap includes a string describing the specific event which triggered t… |
| 1.3.6.1.4.1.789.0.547 | remoteSystemMgmtPeriodic | 0 | 0 | This is a periodic keep alive from system remote management. The trap includes a string describing the specific event which trigg… |
| 1.3.6.1.4.1.789.0.556 | remotesystemMgmtTest | 0 | 0 | This is a test trap from system remote management. The trap includes a string describing the specific event which triggered the t… |
| 1.3.6.1.4.1.789.0.562 | diskMultipathOneSwitch | 0 | 0 | A multipathed disk is only connected to one switch. |
| 1.3.6.1.4.1.789.0.563 | diskMultipathNoTakeover | 0 | 0 | Multipath disks or luns could not be detected for the partner. The node will be unable to takeover correctly. |
| 1.3.6.1.4.1.789.0.565 | diskMultipathWarning | 0 | 0 | Synchronous mirroring is enabled, even though disks are not multipathed. |
| 1.3.6.1.4.1.789.0.574 | driveDisableErr | 0 | 0 | A drive has been disabled by the shelf module due to hardware errors. If it is the only drive in the shelf that is disabled, rep… |
| 1.3.6.1.4.1.789.0.587 | hbaOfflineInformation | 0 | 0 | A host bus adapter (HBA) port has been disabled. This state may be caused either by user command or by errors that make the inter… |
| 1.3.6.1.4.1.789.0.606 | lunSnapRestoreStatus | 0 | 0 | Status of the Snap Restore |
| 1.3.6.1.4.1.789.0.616 | lunCloneCreate | 0 | 0 | Created a LUN Clone |
| 1.3.6.1.4.1.789.0.626 | lunCloneSplitStart | 0 | 0 | LUN Clone Split started |
| 1.3.6.1.4.1.789.0.627 | lunCloneSplitComplete | 0 | 0 | LUN Clone Split completed |
| 1.3.6.1.4.1.789.0.636 | flexCloneSplitStart | 0 | 0 | Flex Clone Split started |
| 1.3.6.1.4.1.789.0.637 | flexCloneSplitComplete | 0 | 0 | Flex Clone Split completed |
| 1.3.6.1.4.1.789.0.646 | volumeCloneCreate | 0 | 0 | Created a Volume Clone |
| 1.3.6.1.4.1.789.0.656 | snapAutoDelete | 0 | 0 | Snapshot Autodeleted |
| 1.3.6.1.4.1.789.0.666 | volumeAutogrow | 0 | 0 | Volume is Autogrown |
| 1.3.6.1.4.1.789.0.674 | timedTargetNotResponding | 0 | 0 | NTP Time Daemon lost contact with the configured target |
| 1.3.6.1.4.1.789.0.676 | extcacheCardError | 0 | 0 | External cache card failure |
| 1.3.6.1.4.1.789.0.686 | extcacheCardOffline | 0 | 0 | External cache is taken offline |
| 1.3.6.1.4.1.789.0.695 | svBackupSnapWarningLimit | 0 | 0 | The remaining number of Snapshot copies for a backup schedule is below warning limit specified. |
| 1.3.6.1.4.1.789.0.705 | avTrendLicenseExpired | 0 | 0 | Trend Micro antivirus license has expired |
| 1.3.6.1.4.1.789.0.706 | avTrendLicenseExpiring | 0 | 0 | Trend Micro antivirus license is about to expire |
| 1.3.6.1.4.1.789.0.712 | rebootAbnormal | 0 | 0 | System rebooted abnormally after any of the following events: event = watchdog reset, agent watchdog reset, panic, power-glitch. |
| 1.3.6.1.4.1.789.0.716 | rebootNormal | 0 | 0 | System rebooted normally after any of the following events: event = giveback, revert, WAFL check, power-on, internal reboot, inter… |
| 1.3.6.1.4.1.789.0.724 | volMoveCutoverDeferred | 0 | 0 | A volume move job cannot be completed because cutover phase has been deferred. |
| 1.3.6.1.4.1.789.0.734 | volMoveCutoverFailed | 0 | 0 | A volume move job cannot be completed because the cutover attempt resulted in failure. |
| 1.3.6.1.4.1.789.0.736 | volMoveDone | 0 | 0 | A volume move job completed successfully. |
| 1.3.6.1.4.1.789.0.737 | volMoveCutoverDeferredWait | 0 | 0 | A volume move has reached the cutover phase and is waiting for the user to trigger cutover because the user specified wait for cu… |
| 1.3.6.1.4.1.789.0.741 | scsibladeOutOfQuorum | 0 | 0 | The node has lost connectivitiy with the other nodes in the cluster. Both fcp and iscsi traffic have been disabled on this node. … |
| 1.3.6.1.4.1.789.0.746 | scsibladeInQuorum | 0 | 0 | The node established connectivitiy with the other nodes in the cluster. |
| 1.3.6.1.4.1.789.0.773 | avUpdateFailed | 0 | 0 | The anti-virus software update failed. |
| 1.3.6.1.4.1.789.0.774 | avLicenseCheckFailed | 0 | 0 | The anti-virus software license validation failed. |
| 1.3.6.1.4.1.789.0.775 | avMcAfeeProductExpired | 0 | 0 | McAfee product has expired. |
| 1.3.6.1.4.1.789.0.776 | avRemedy | 0 | 0 | Remedy action taken. The file has been repaired, deleted or quarantined. |
| 1.3.6.1.4.1.789.0.777 | avLicenseCheck | 0 | 0 | License validation was successful. |
| 1.3.6.1.4.1.789.0.783 | avRemedyFailure | 0 | 0 | Remedy action failed. The file was not repaired, deleted or quarantined. |
| 1.3.6.1.4.1.789.0.785 | avMcAfeeEngineExpired | 0 | 0 | McAfee product has expired. |
| 1.3.6.1.4.1.789.0.786 | avMcAfeeProductExpiring | 0 | 0 | McAfee product is expiring. |
| 1.3.6.1.4.1.789.0.793 | av2gbFileNotScanned | 0 | 0 | A file larger than 2GB is not scanned and marked as clean. |
| 1.3.6.1.4.1.789.0.796 | avMcAfeeEngineExpiring | 0 | 0 | McAfee engine is expiring. |
| 1.3.6.1.4.1.789.0.802 | avVirusfound | 0 | 0 | Virus found while scanning. |
| 1.3.6.1.4.1.789.0.803 | avMcAfeeLicenseFailed | 0 | 0 | McAfee antivirus license activation failed. |
| 1.3.6.1.4.1.789.0.804 | avDisableFailed | 0 | 0 | The anti-virus service disabling failed in the cluster. |
| 1.3.6.1.4.1.789.0.805 | avDisable | 0 | 0 | The anti-virus service is disabled in the cluster. |
| 1.3.6.1.4.1.789.0.806 | avMcAfeeLicenseExpiring | 0 | 0 | McAfee antivirus license is about to expire. |
| 1.3.6.1.4.1.789.0.807 | avEnable | 0 | 0 | The anti-virus service is enabled in the cluster. |
| 1.3.6.1.4.1.789.0.812 | avSpywareFound | 0 | 0 | Spyware found while scanning. |
| 1.3.6.1.4.1.789.0.813 | avEnableFailed | 0 | 0 | The anti-virus service enabling failed in the cluster. |
| 1.3.6.1.4.1.789.0.814 | avRollbackFailed | 0 | 0 | The anti-virus software rollback failed. |
| 1.3.6.1.4.1.789.0.816 | avRollback | 0 | 0 | The anti-virus software is rolled back. |
| 1.3.6.1.4.1.789.0.817 | avUpdate | 0 | 0 | The anti-virus software is updated. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.789.1 | netapp1 | 27 | 4040 | None |
| 1.3.6.1.4.1.789.2 | netappProducts | 6 | 6 | None |
| 1.3.6.1.4.1.789.3 | netappDataFabricManager | 0 | 0 | None |
| 1.3.6.1.4.1.789.4 | netappSupportConsole | 0 | 0 | None |