This is an entry in the vsmCodingProfileTable.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
This is an entry in the vsmCodingProfileTable.
For more information, please see the following CLI command:
[Note: There is NO equivalent command in the CLI.]
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: ENTRY
Access: not-accessible
Syntax: VsmCodingProfEntry
Automatically extracted from www.mibdepot.com
vsmCodingProfEntry OBJECT-TYPE SYNTAX VsmCodingProfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmCodingProfileTable." INDEX { vsmCodingProfName } ::= { vsmCodingProfileTable 1 }
vsmCodingProfEntry OBJECT-TYPE SYNTAX VsmCodingProfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmCodingProfileTable. For more information, please see the following CLI command: [Note: There is NO equivalent command in the CLI.] " INDEX { vsmCodingProfName } ::= { vsmCodingProfileTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.26.3.1.1.1 | vsmCodingProfId | 0 | 0 | The coding profile ID uniquely distinguishes the coding profile. |
1.3.6.1.4.1.800.2.26.3.1.1.2 | vsmCodingProfName | 0 | 0 | The coding profile name provides a text label for the coding profile. |
1.3.6.1.4.1.800.2.26.3.1.1.3 | vsmCodingProfCallerId | 0 | 0 | Enables or Disables Caller Id for the specified Coding Profile. |
1.3.6.1.4.1.800.2.26.3.1.1.4 | vsmCodingProfCodingType | 0 | 0 | Used to define the codec type. |
1.3.6.1.4.1.800.2.26.3.1.1.5 | vsmCodingProfPktInterval | 0 | 0 | Specifies the Voice Packet Interval in milliseconds. The size of the Voice Information Field (vsmCodingProfVIF) is determined by… |
1.3.6.1.4.1.800.2.26.3.1.1.6 | vsmCodingProfVIF | 0 | 0 | deprecated |
1.3.6.1.4.1.800.2.26.3.1.1.7 | vsmCodingProfNetBufMode | 0 | 0 | Configures the mode of the adaptive playback function for a coding profile. With the voice network delay buffer mode set to stat… |
1.3.6.1.4.1.800.2.26.3.1.1.8 | vsmCodingProfNetBufNomDelay | 0 | 0 | The average delay (in msec) maintained in the path from the packet network to the PCM interface to compensate for the network jit… |
1.3.6.1.4.1.800.2.26.3.1.1.9 | vsmCodingProfNetBufMaxDelay | 0 | 0 | The maximum instantaneous delay (in msec) beyond which the playout buffer is being recentered. |
1.3.6.1.4.1.800.2.26.3.1.1.10 | vsmCodingProfDtmfRelay | 0 | 0 | Enables or disables the DTMF Relay mode for a Coding Profile, in which DTMF tones are detected during voice processing and separa… |
1.3.6.1.4.1.800.2.26.3.1.1.11 | vsmCodingProfVAD | 0 | 0 | Enables or disables Voice Activity Detection (VAD). |
1.3.6.1.4.1.800.2.26.3.1.1.12 | vsmCodingProfEC | 0 | 0 | Enables or disables the Echo Canceller (EC). |
1.3.6.1.4.1.800.2.26.3.1.1.13 | vsmCodingProfSwitchover | 0 | 0 | Enables or Disables switchover to FAX when configured as a voice line. If enabled, switchover will occur when the appropriate FA… |
1.3.6.1.4.1.800.2.26.3.1.1.15 | vsmCodingProfCallProgToneDet | 0 | 0 | Enables or disables a secondary level of control of call progress detection. If the call progress detection control for a channe… |
1.3.6.1.4.1.800.2.26.3.1.1.16 | vsmCodingProfV18ToneDet | 0 | 0 | Enables or disables V.18 Annex A tone detection. The V.18 Annex A tone is a 1400 HZ tone is detected for 100ms. It is used for ch… |
1.3.6.1.4.1.800.2.26.3.1.1.17 | vsmCodingProfVADThreshMode | 0 | 0 | The mode of the audio threshold level for the Voice Activity Detector (VAD) in a Coding Profile to be adaptive or relative to a r… |
1.3.6.1.4.1.800.2.26.3.1.1.18 | vsmCodingProfVADThreshLevel | 0 | 0 | If the Voice Activity Detector (VAD) is set to relative using vsmCodingProfVADThreshMode, then this object is used to set the aud… |
1.3.6.1.4.1.800.2.26.3.1.1.19 | vsmCodingProfVEchoCanComfNoiseMode | 0 | 0 | New leaf for 2.2f parser. |
1.3.6.1.4.1.800.2.26.3.1.1.20 | vsmCodingProfEchoCanRefreshCfg | 0 | 0 | New leaf for 2.2f parser. |
1.3.6.1.4.1.800.2.26.3.1.1.21 | vsmCodingProfEchoCanRefreshState | 0 | 0 | New leaf for 2.2f parser. For more information, please see the following CLI command: voice coding profile 'codingProfName' echo … |
1.3.6.1.4.1.800.2.26.3.1.1.22 | vsmCodingProfECTailDelay | 0 | 0 | Echo canceller (EC) tail delay in msec. For more information, please see the following CLI command: voice coding profile 'codingP… |
1.3.6.1.4.1.800.2.26.3.1.1.23 | vsmCodingProfECNonLinear | 0 | 0 | Enables or disables non-linear echo canceller (EC). object only has effect if the vsmCodingProfEC object is enabled. For more in… |
1.3.6.1.4.1.800.2.26.3.1.1.34 | vsmCodingProfFaxRate | 0 | 0 | None |
1.3.6.1.4.1.800.2.26.3.1.1.35 | vsmCodingProfFaxRate | 0 | 0 | Specifies the FAX maximum rate. For more information, please see the following CLI command: voice coding profile 'codingProfName'… |
1.3.6.1.4.1.800.2.26.3.1.1.36 | vsmCodingProfFaxTxLevel | 0 | 0 | Specifies the fax modem transmit (tx) gain. For more information, please see the following CLI command: voice coding profile 'cod… |
1.3.6.1.4.1.800.2.26.3.1.1.37 | vsmCodingProfFaxCdThresh | 0 | 0 | Specifies the fax modem carrier-detection threshold. For more information, please see the following CLI command: voice coding pro… |
1.3.6.1.4.1.800.2.26.3.1.1.38 | vsmCodingProfFaxTimeOut | 0 | 0 | Specifies the amount of time of no activity on a fax modem connection before the call will be cleared. For more information, plea… |
1.3.6.1.4.1.800.2.26.3.1.1.39 | vsmCodingProfFaxHsPktRate | 0 | 0 | Specifies the rate at which high speed data will be sent across the network, for fax coding. For more information, please see the… |
1.3.6.1.4.1.800.2.26.3.1.1.40 | vsmCodingProfFaxLsRedun | 0 | 0 | Specifies the packet-level redundancy for low speed data transmission, for fax coding. For more information, please see the follo… |
1.3.6.1.4.1.800.2.26.3.1.1.41 | vsmCodingProfFaxHsRedun | 0 | 0 | Specifies the packet-level redundancy for high speed data transmission, for fax coding. For more information, please see the foll… |
1.3.6.1.4.1.800.2.26.3.1.1.42 | vsmCodingProfFaxTcfMethod | 0 | 0 | Specifies the method with which data is handled over the network, for fax coding. For more information, please see the following … |
1.3.6.1.4.1.800.2.26.3.1.1.43 | vsmCodingProfSilenceDetect | 0 | 0 | Enables or disables silence detection. For more information, please see the following CLI command: voice coding profile 'codingPr… |
1.3.6.1.4.1.800.2.26.3.1.1.44 | vsmCodingProfSilenceDetectTime | 0 | 0 | Specifies the silent time for declaring silence detection. To disable silence detection use the object vsmCodingProfSilenceDetect… |
1.3.6.1.4.1.800.2.26.3.1.1.45 | vsmCodingProfSilenceLevel | 0 | 0 | Specifies the silence signal level for declaring silence detection. For more information, please see the following CLI command: vo… |
1.3.6.1.4.1.800.2.26.3.1.1.46 | vsmCodingProfVoiceComfortNoiseLevel | 0 | 0 | This command is used to set the comfort noise level. For more information, please see the following CLI command: voice coding pro… |
1.3.6.1.4.1.800.2.26.3.1.1.47 | vsmCodingProfG711ModemResampMode | 0 | 0 | This command toggles resampling on or off for a Coding Profile. For more information, please see the following CLI command: voice… |
1.3.6.1.4.1.800.2.26.3.1.1.48 | vsmCodingProfSinFreqToneDet | 0 | 0 | This command is used to enable or disable SF Single Frequency signaling tone detection. The SF Signaling characteristocs are de… |
1.3.6.1.4.1.800.2.26.3.1.1.49 | vsmCodingProfRowStatus | 0 | 0 | This object is the RowStatus (locking flag) for creating the vsmCodingProfileTable conceptual row. For more information, please s… |