Specifies the Voice Information Field size in bits. This object
can only be read. It is determined by vsmCodingProfCodingType
andvsmCodingProfPktInterval. The table in the description for
the object vsmCodingProfPktInterval shows the VIF size given
the other two parameters.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
deprecated
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
vsmCodingProfVIF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Voice Information Field size in bits. This object can only be read. It is determined by vsmCodingProfCodingType andvsmCodingProfPktInterval. The table in the description for the object vsmCodingProfPktInterval shows the VIF size given the other two parameters." ::= { vsmCodingProfEntry 6 }
vsmCodingProfVIF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "deprecated" DEFVAL {384} ::= { vsmCodingProfEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.26.3.1.1.1 | vsmCodingProfId | 0 | 0 | The coding profile ID uniquely distinguishes the coding profile. |
1.3.6.1.4.1.800.2.26.3.1.1.2 | vsmCodingProfName | 0 | 0 | The coding profile name provides a text label for the coding profile. |
1.3.6.1.4.1.800.2.26.3.1.1.3 | vsmCodingProfCallerId | 0 | 0 | Enables or Disables Caller Id for the specified Coding Profile. |
1.3.6.1.4.1.800.2.26.3.1.1.4 | vsmCodingProfCodingType | 0 | 0 | Used to define the codec type. |
1.3.6.1.4.1.800.2.26.3.1.1.5 | vsmCodingProfPktInterval | 0 | 0 | Specifies the Voice Packet Interval in milliseconds. The size of the Voice Information Field (vsmCodingProfVIF) is determined by… |
1.3.6.1.4.1.800.2.26.3.1.1.7 | vsmCodingProfNetBufMode | 0 | 0 | Configures the mode of the adaptive playback function for a coding profile. With the voice network delay buffer mode set to stat… |
1.3.6.1.4.1.800.2.26.3.1.1.8 | vsmCodingProfNetBufNomDelay | 0 | 0 | The average delay (in msec) maintained in the path from the packet network to the PCM interface to compensate for the network jit… |
1.3.6.1.4.1.800.2.26.3.1.1.9 | vsmCodingProfNetBufMaxDelay | 0 | 0 | The maximum instantaneous delay (in msec) beyond which the playout buffer is being recentered. |
1.3.6.1.4.1.800.2.26.3.1.1.10 | vsmCodingProfDtmfRelay | 0 | 0 | Enables or disables the DTMF Relay mode for a Coding Profile, in which DTMF tones are detected during voice processing and separa… |
1.3.6.1.4.1.800.2.26.3.1.1.11 | vsmCodingProfVAD | 0 | 0 | Enables or disables Voice Activity Detection (VAD). |
1.3.6.1.4.1.800.2.26.3.1.1.12 | vsmCodingProfEC | 0 | 0 | Enables or disables the Echo Canceller (EC). |
1.3.6.1.4.1.800.2.26.3.1.1.13 | vsmCodingProfSwitchover | 0 | 0 | Enables or Disables switchover to FAX when configured as a voice line. If enabled, switchover will occur when the appropriate FA… |
1.3.6.1.4.1.800.2.26.3.1.1.15 | vsmCodingProfCallProgToneDet | 0 | 0 | Enables or disables a secondary level of control of call progress detection. If the call progress detection control for a channe… |
1.3.6.1.4.1.800.2.26.3.1.1.16 | vsmCodingProfV18ToneDet | 0 | 0 | Enables or disables V.18 Annex A tone detection. The V.18 Annex A tone is a 1400 HZ tone is detected for 100ms. It is used for ch… |
1.3.6.1.4.1.800.2.26.3.1.1.17 | vsmCodingProfVADThreshMode | 0 | 0 | The mode of the audio threshold level for the Voice Activity Detector (VAD) in a Coding Profile to be adaptive or relative to a r… |
1.3.6.1.4.1.800.2.26.3.1.1.18 | vsmCodingProfVADThreshLevel | 0 | 0 | If the Voice Activity Detector (VAD) is set to relative using vsmCodingProfVADThreshMode, then this object is used to set the aud… |
1.3.6.1.4.1.800.2.26.3.1.1.19 | vsmCodingProfVEchoCanComfNoiseMode | 0 | 0 | New leaf for 2.2f parser. |
1.3.6.1.4.1.800.2.26.3.1.1.20 | vsmCodingProfEchoCanRefreshCfg | 0 | 0 | New leaf for 2.2f parser. |
1.3.6.1.4.1.800.2.26.3.1.1.21 | vsmCodingProfEchoCanRefreshState | 0 | 0 | New leaf for 2.2f parser. For more information, please see the following CLI command: voice coding profile 'codingProfName' echo … |
1.3.6.1.4.1.800.2.26.3.1.1.22 | vsmCodingProfECTailDelay | 0 | 0 | Echo canceller (EC) tail delay in msec. For more information, please see the following CLI command: voice coding profile 'codingP… |
1.3.6.1.4.1.800.2.26.3.1.1.23 | vsmCodingProfECNonLinear | 0 | 0 | Enables or disables non-linear echo canceller (EC). object only has effect if the vsmCodingProfEC object is enabled. For more in… |
1.3.6.1.4.1.800.2.26.3.1.1.34 | vsmCodingProfFaxRate | 0 | 0 | None |
1.3.6.1.4.1.800.2.26.3.1.1.35 | vsmCodingProfFaxRate | 0 | 0 | Specifies the FAX maximum rate. For more information, please see the following CLI command: voice coding profile 'codingProfName'… |
1.3.6.1.4.1.800.2.26.3.1.1.36 | vsmCodingProfFaxTxLevel | 0 | 0 | Specifies the fax modem transmit (tx) gain. For more information, please see the following CLI command: voice coding profile 'cod… |
1.3.6.1.4.1.800.2.26.3.1.1.37 | vsmCodingProfFaxCdThresh | 0 | 0 | Specifies the fax modem carrier-detection threshold. For more information, please see the following CLI command: voice coding pro… |
1.3.6.1.4.1.800.2.26.3.1.1.38 | vsmCodingProfFaxTimeOut | 0 | 0 | Specifies the amount of time of no activity on a fax modem connection before the call will be cleared. For more information, plea… |
1.3.6.1.4.1.800.2.26.3.1.1.39 | vsmCodingProfFaxHsPktRate | 0 | 0 | Specifies the rate at which high speed data will be sent across the network, for fax coding. For more information, please see the… |
1.3.6.1.4.1.800.2.26.3.1.1.40 | vsmCodingProfFaxLsRedun | 0 | 0 | Specifies the packet-level redundancy for low speed data transmission, for fax coding. For more information, please see the follo… |
1.3.6.1.4.1.800.2.26.3.1.1.41 | vsmCodingProfFaxHsRedun | 0 | 0 | Specifies the packet-level redundancy for high speed data transmission, for fax coding. For more information, please see the foll… |
1.3.6.1.4.1.800.2.26.3.1.1.42 | vsmCodingProfFaxTcfMethod | 0 | 0 | Specifies the method with which data is handled over the network, for fax coding. For more information, please see the following … |
1.3.6.1.4.1.800.2.26.3.1.1.43 | vsmCodingProfSilenceDetect | 0 | 0 | Enables or disables silence detection. For more information, please see the following CLI command: voice coding profile 'codingPr… |
1.3.6.1.4.1.800.2.26.3.1.1.44 | vsmCodingProfSilenceDetectTime | 0 | 0 | Specifies the silent time for declaring silence detection. To disable silence detection use the object vsmCodingProfSilenceDetect… |
1.3.6.1.4.1.800.2.26.3.1.1.45 | vsmCodingProfSilenceLevel | 0 | 0 | Specifies the silence signal level for declaring silence detection. For more information, please see the following CLI command: vo… |
1.3.6.1.4.1.800.2.26.3.1.1.46 | vsmCodingProfVoiceComfortNoiseLevel | 0 | 0 | This command is used to set the comfort noise level. For more information, please see the following CLI command: voice coding pro… |
1.3.6.1.4.1.800.2.26.3.1.1.47 | vsmCodingProfG711ModemResampMode | 0 | 0 | This command toggles resampling on or off for a Coding Profile. For more information, please see the following CLI command: voice… |
1.3.6.1.4.1.800.2.26.3.1.1.48 | vsmCodingProfSinFreqToneDet | 0 | 0 | This command is used to enable or disable SF Single Frequency signaling tone detection. The SF Signaling characteristocs are de… |
1.3.6.1.4.1.800.2.26.3.1.1.49 | vsmCodingProfRowStatus | 0 | 0 | This object is the RowStatus (locking flag) for creating the vsmCodingProfileTable conceptual row. For more information, please s… |