Id of the group to which the port belongs.
Parsed from file APPLIC.MIB.txt
Company: None
Module: APPLIC-MIB
Id of the group to which the port belongs.
Parsed from file APPLIC-MIB.mib
Module: APPLIC-MIB
Vendor: Lannet Company
Module: APPLIC-MIB
[Automatically extracted from oidview.com]
lseIntPortGroupId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Id of the group to which the port belongs." ::= { lseIntPortEntry 1 }
lseIntPortGroupId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Id of the group to which the port belongs." ::= { lseIntPortEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.19.1.2.1.1.2 | lseIntPortId | 0 | 0 | Number of LanSwitch port in the board. |
1.3.6.1.4.1.81.19.1.2.1.1.3 | lseIntPortIOMode | 0 | 0 | on(1) activates IO mode in which all packets on the high-speed bus that were not captured by any regular port are captured by the… |
1.3.6.1.4.1.81.19.1.2.1.1.4 | lseIntPortResetSwitchCAM | 0 | 0 | Acting like toggle switch thus always returns off(2) on read. When set to on(1), causes the reset of the LANswitch CAM (addresses… |
1.3.6.1.4.1.81.19.1.2.1.1.5 | lseIntPortVideoPacket | 0 | 0 | When set to on(1), all Tx packets toward the high-speed bus to video type packets. |
1.3.6.1.4.1.81.19.1.2.1.1.6 | lseIntPortPriorityStateMachine | 0 | 0 | Setting the value of this attribute to on(1) activates the priority mechanism. |
1.3.6.1.4.1.81.19.1.2.1.1.7 | lseIntPortActiveBroadcastPriority | 0 | 0 | Setting the value of this attribute to on(1) activates the active broadcast mode in priority mechanism. |
1.3.6.1.4.1.81.19.1.2.1.1.8 | lseIntPortPriorityLevel | 0 | 0 | This attribute defines the priority levels of Tx packets toward the high-speed bus. The highest priority is broadcast(1). |
1.3.6.1.4.1.81.19.1.2.1.1.9 | lseIntPortSuperPriorityEnable | 0 | 0 | When limited space is left in Tx buffer, only the highest priority packets are accepted. This in turn can create a situation in… |
1.3.6.1.4.1.81.19.1.2.1.1.10 | lseIntPortRoutingMode | 0 | 0 | generic(1) - examines all the packets that are not members of any virtual network. net(2) - examines only the packets that have th… |
1.3.6.1.4.1.81.19.1.2.1.1.11 | lseIntPortGlobal | 0 | 0 | Setting the global mode to on(1) sets the port in a network routing mode that examines all packets that are not members of all v… |
1.3.6.1.4.1.81.19.1.2.1.1.12 | lseIntPortLearnIOCAM | 0 | 0 | Setting this parameter to on(1) enables an I/O port to learn incoming MAC addresses received in its port and store them in its CA… |
1.3.6.1.4.1.81.19.1.2.1.1.13 | lseIntPortSecurity | 0 | 0 | Setting the value of this attribute to on(1) activates the security mode. |
1.3.6.1.4.1.81.19.1.2.1.1.14 | lseIntPortIgnoreBusy | 0 | 0 | Setting the value of this attribute to on(1) activates the ignore busy mode. The busy signal toward the high-speed bus is not ac… |
1.3.6.1.4.1.81.19.1.2.1.1.15 | lseIntPortRetryPriorityLevel1 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..31) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.16 | lseIntPortRetryPriorityLevel2 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.17 | lseIntPortRetryPriorityLevel3 | 0 | 0 | The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials. |
1.3.6.1.4.1.81.19.1.2.1.1.18 | lseIntPortIgnoreProtocolType | 0 | 0 | Any packet regardless of the protocol type is received from the high-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.19 | lseIntPortCompanyMAC | 0 | 0 | The attribute defines the first three bytes of the MAC address of the video host server. |
1.3.6.1.4.1.81.19.1.2.1.1.20 | lseIntPortTxSafetyZone | 0 | 0 | Defines the Tx Safety Zone in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.21 | lseIntPortRxSafetyZone | 0 | 0 | Defines the Rx Safety Zone in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.22 | lseIntPortTxBurstLength | 0 | 0 | Defines the TX Burst Length in bits. |
1.3.6.1.4.1.81.19.1.2.1.1.23 | lseIntPortSecurityIntruder | 0 | 0 | The value on(1) of this attribute reflects a security violation occurrence. |
1.3.6.1.4.1.81.19.1.2.1.1.24 | lseIntPortJabber | 0 | 0 | Value on(1) of this attribute reflects that jabber was transmitted to the port by the high-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.25 | lseIntPortCAM | 0 | 0 | 112 bytes of MAC addresses. Each contains one byte of the port number and six bytes of the MAC address. This enables to send 16 … |
1.3.6.1.4.1.81.19.1.2.1.1.26 | lseIntPortVideoStateMachine | 0 | 0 | Setting the value of this attribute to on(1) activates the video state machine mode. Received packets are filtered by demand fro… |
1.3.6.1.4.1.81.19.1.2.1.1.27 | lseIntPortTransmitWeight | 0 | 0 | Defines the Transmit Weight of the frames for the current LANswitch port toward the high - speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.28 | lseIntPortSuperPriority | 0 | 0 | Setting the value of this attribute to on(1) activates the retry priority functions. |
1.3.6.1.4.1.81.19.1.2.1.1.29 | lseIntPortAlignment | 0 | 0 | The number of alignment errors observed on a specified port. |
1.3.6.1.4.1.81.19.1.2.1.1.30 | lseIntPortRxReject | 0 | 0 | The number of Rx buffer full observed on a specified port, from the line toward the High-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.31 | lseIntPortTxReject | 0 | 0 | The number of Tx buffer full observed on a specified port, from the line toward the High-speed bus. |
1.3.6.1.4.1.81.19.1.2.1.1.32 | lseIntPortRxEmpty0 | 0 | 0 | Define the highest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is full. When th… |
1.3.6.1.4.1.81.19.1.2.1.1.33 | lseIntPortRxEmpty1 | 0 | 0 | Define the middle threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. W… |
1.3.6.1.4.1.81.19.1.2.1.1.34 | lseIntPortRxEmpty2 | 0 | 0 | Define the lowest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. W… |
1.3.6.1.4.1.81.19.1.2.1.1.35 | lseIntPortSuperNetNumber | 0 | 0 | If the internal port supports SuperNet mode, the user have to define the supernet number. Default value is 0. Change of this numb… |
1.3.6.1.4.1.81.19.1.2.1.1.36 | lseIntPortGlobalSuperNet | 0 | 0 | An internal port that is part of all SuperNets is set to Global SuperNet routing. The SuperNet number is 15 in this case. |
1.3.6.1.4.1.81.19.1.2.1.1.37 | lseIntPortMACAddress | 0 | 0 | The MAC address of the port, if it has. If not, an octet string of length 0. |
1.3.6.1.4.1.81.19.1.2.1.1.38 | lseIntPortIgnoreRoutingMode | 0 | 0 | When this parameter is 'ignore', the LANSwitch port monitors all packets without paying attention to the virtual net assignment. |
1.3.6.1.4.1.81.19.1.2.1.1.39 | lseIntPortCAMLastChange | 0 | 0 | This attribute contains the value of sysUpTime at the time any change occured to the content of the specific CAM. |
1.3.6.1.4.1.81.19.1.2.1.1.40 | lseIntPortCopiedPort | 0 | 0 | The port monitored on the LANswitch bus by the LSE-PM module. The value of this item is: 32*(S-1)+P, where S is the slot number i… |
1.3.6.1.4.1.81.19.1.2.1.1.41 | lseIntPortBroadcastBehavior | 0 | 0 | This item relates only to LSE-PM modules. The value of this item defines the method by which the module treats broadcast and mult… |
1.3.6.1.4.1.81.19.1.2.1.1.42 | lseIntPortFilteringMethod | 0 | 0 | This item is relevant only to the LSE-PM module. The value of this item defines the filtering method used to capture packets from… |
1.3.6.1.4.1.81.19.1.2.1.1.43 | lseIntPortSetFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item is used to add new addresses to the module's filtering table. The strin… |
1.3.6.1.4.1.81.19.1.2.1.1.44 | lseIntPortRemoveFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item is used to remove existing addresses from the module's filtering table.… |
1.3.6.1.4.1.81.19.1.2.1.1.45 | lseIntPortClearFilter | 0 | 0 | This item is relevant only to the LSE-PM module. The item acts as a toggle switch: when its value is set to clear(2), the content… |
1.3.6.1.4.1.81.19.1.2.1.1.46 | lseIntPortMonitorMissedEvents | 0 | 0 | This item is relevant only to LSE-PM modules. The value of the counter is the number of packets that were not captured by the por… |