This attribute describes the interfaces of agents eventually existing on
LANNET modules and their type. Value none defines the lack of an agent or
of an interface recognized by the management console. Any other value
defines an interface whose type is recognized by the management console
and may be used as a management channel.
Parsed from file LANNET-MIB.mib
Module: LANNET-MIB
lntGroupAgentIfType OBJECT-TYPE SYNTAX INTEGER { none(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10MBit(12), proteon-80MBit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), t1-carrier(18), cept(19), basicIsdn(20), primaryIsdn(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ip(255) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the interfaces of agents eventually existing on LANNET modules and their type. Value none defines the lack of an agent or of an interface recognized by the management console. Any other value defines an interface whose type is recognized by the management console and may be used as a management channel." ::= { lntGroupTable 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.2.6.1 | lntGroupHWVersion | 0 | 0 | ASCII string for description and display of the sensor hardware version, as it is known to the agent software. |
| 1.3.6.1.4.1.81.2.6.2 | lntGroupSWVersion | 0 | 0 | ASCII string for description and display of the sensor application soft- ware version . |
| 1.3.6.1.4.1.81.2.6.3 | lntGroupKernelVersion | 0 | 0 | ASCII string for description and display of the sensor kernel software version. |
| 1.3.6.1.4.1.81.2.6.4 | lntGroupType | 0 | 0 | Attribute describing the type of LANNET Ethernet group. |
| 1.3.6.1.4.1.81.2.6.5 | lntGroupFIFO | 0 | 0 | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a LANNET repeater. |
| 1.3.6.1.4.1.81.2.6.6 | lntGroupJabber | 0 | 0 | Value ON of this attribute reflects jabber being transmitted to the bus by the hardware of a LANNET repeater, as a result of col… |
| 1.3.6.1.4.1.81.2.6.7 | lntGroupBusPartition | 0 | 0 | The AutoPart condition indicates that a LANNET repeater is currently par- titioned from the internal bus by the auto-partition m… |
| 1.3.6.1.4.1.81.2.6.8 | lntGroupRedun12 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 1 and 2 on a LANNET mod… |
| 1.3.6.1.4.1.81.2.6.9 | lntGroupRedun34 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 3 and 4 on a LANNET mod… |
| 1.3.6.1.4.1.81.2.6.10 | lntGroup10BTPlus | 0 | 0 | Value ON of this attribute defines activation of the 10BaseT+ mode of one of the LE-40XT, LE-80XT, LE-140XT modules. 10BaseT+ is… |
| 1.3.6.1.4.1.81.2.6.11 | lntGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a group, in internal LANNET application format. |
| 1.3.6.1.4.1.81.2.6.13 | lntGroupAgentAddress | 0 | 0 | This attribute defines an unique address by which the agent may be addres- sed by the management console. The address format sho… |
| 1.3.6.1.4.1.81.2.6.14 | lntGroupWrongPortSelection | 0 | 0 | A value ON of this attribute warns of incorrect selection of enabled ports on sensors which impose restrictions on this configur… |
| 1.3.6.1.4.1.81.2.6.15 | lntGroupSupplyVoltageFault | 0 | 0 | A value ON of this attribute informs of a 'voltage supply out-of-range' error candition on sensor hardware which checks this con… |
| 1.3.6.1.4.1.81.2.6.16 | lntGroupNumberOfIntPorts | 0 | 0 | Number of internal ports (ports connected to the enclosure buses) on the sensor. |
| 1.3.6.1.4.1.81.2.6.17 | lntGroupInPortsRedundancy | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between internal ports 1 and 2 on a LANNET module. |
| 1.3.6.1.4.1.81.2.6.18 | lntGroupStandAloneModeSwitch | 0 | 0 | Value ON of this attribute indicates the sensor's operation Stand Alone mode . Internal ports are disabled and the card function… |
| 1.3.6.1.4.1.81.2.6.19 | lntGroupId | 0 | 0 | Unique ID number for the group in the lntGroupTable. |
| 1.3.6.1.4.1.81.2.6.20 | lntGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.2.6.21 | lntGroupBackboneMode | 0 | 0 | Value On of this attribute defines Backbone Mode of a sensor. Internal ports are enabled and the information path goes straightl… |
| 1.3.6.1.4.1.81.2.6.22 | lntGroupFOIRLPlusMode | 0 | 0 | Value On of this attribute defines FOIRL of a sensor. When this attribute has value ON, FOIRL Plus mode is enabled, while value … |
| 1.3.6.1.4.1.81.2.6.23 | lntGroupLATStatus | 0 | 0 | Value ON of this attribute means that LAT protocol is Enabled on the LANNET Ethernet module. |
| 1.3.6.1.4.1.81.2.6.24 | lntGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
| 1.3.6.1.4.1.81.2.6.25 | lntGroupOperationMode | 0 | 0 | This attribute describes the operation mode of the module in a multiprocessor configuration sensor, as reported by interprocesso… |
| 1.3.6.1.4.1.81.2.6.26 | lntGroupCommunicationStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |
| 1.3.6.1.4.1.81.2.6.27 | lntGroupHardwareStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.81.2.6.38 | trGroupHardwareStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |