Value ON of this attribute defines a redundancy (backup) relationship between
synchronous external ports 3 and 4 on a LANNET module. Valid for modules
LE-30X, LE-30XD, LE-40X, LE-40XT.
Parsed from file LANNET-MIB.mib
Module: LANNET-MIB
lntGroupRedun34 OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 3 and 4 on a LANNET module. Valid for modules LE-30X, LE-30XD, LE-40X, LE-40XT." ::= { lntGroupTable 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.2.6.1 | lntGroupHWVersion | 0 | 0 | ASCII string for description and display of the sensor hardware version, as it is known to the agent software. |
| 1.3.6.1.4.1.81.2.6.2 | lntGroupSWVersion | 0 | 0 | ASCII string for description and display of the sensor application soft- ware version . |
| 1.3.6.1.4.1.81.2.6.3 | lntGroupKernelVersion | 0 | 0 | ASCII string for description and display of the sensor kernel software version. |
| 1.3.6.1.4.1.81.2.6.4 | lntGroupType | 0 | 0 | Attribute describing the type of LANNET Ethernet group. |
| 1.3.6.1.4.1.81.2.6.5 | lntGroupFIFO | 0 | 0 | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a LANNET repeater. |
| 1.3.6.1.4.1.81.2.6.6 | lntGroupJabber | 0 | 0 | Value ON of this attribute reflects jabber being transmitted to the bus by the hardware of a LANNET repeater, as a result of col… |
| 1.3.6.1.4.1.81.2.6.7 | lntGroupBusPartition | 0 | 0 | The AutoPart condition indicates that a LANNET repeater is currently par- titioned from the internal bus by the auto-partition m… |
| 1.3.6.1.4.1.81.2.6.8 | lntGroupRedun12 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 1 and 2 on a LANNET mod… |
| 1.3.6.1.4.1.81.2.6.10 | lntGroup10BTPlus | 0 | 0 | Value ON of this attribute defines activation of the 10BaseT+ mode of one of the LE-40XT, LE-80XT, LE-140XT modules. 10BaseT+ is… |
| 1.3.6.1.4.1.81.2.6.11 | lntGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a group, in internal LANNET application format. |
| 1.3.6.1.4.1.81.2.6.12 | lntGroupAgentIfType | 0 | 0 | This attribute describes the interfaces of agents eventually existing on LANNET modules and their type. Value none defines the l… |
| 1.3.6.1.4.1.81.2.6.13 | lntGroupAgentAddress | 0 | 0 | This attribute defines an unique address by which the agent may be addres- sed by the management console. The address format sho… |
| 1.3.6.1.4.1.81.2.6.14 | lntGroupWrongPortSelection | 0 | 0 | A value ON of this attribute warns of incorrect selection of enabled ports on sensors which impose restrictions on this configur… |
| 1.3.6.1.4.1.81.2.6.15 | lntGroupSupplyVoltageFault | 0 | 0 | A value ON of this attribute informs of a 'voltage supply out-of-range' error candition on sensor hardware which checks this con… |
| 1.3.6.1.4.1.81.2.6.16 | lntGroupNumberOfIntPorts | 0 | 0 | Number of internal ports (ports connected to the enclosure buses) on the sensor. |
| 1.3.6.1.4.1.81.2.6.17 | lntGroupInPortsRedundancy | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between internal ports 1 and 2 on a LANNET module. |
| 1.3.6.1.4.1.81.2.6.18 | lntGroupStandAloneModeSwitch | 0 | 0 | Value ON of this attribute indicates the sensor's operation Stand Alone mode . Internal ports are disabled and the card function… |
| 1.3.6.1.4.1.81.2.6.19 | lntGroupId | 0 | 0 | Unique ID number for the group in the lntGroupTable. |
| 1.3.6.1.4.1.81.2.6.20 | lntGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.2.6.21 | lntGroupBackboneMode | 0 | 0 | Value On of this attribute defines Backbone Mode of a sensor. Internal ports are enabled and the information path goes straightl… |
| 1.3.6.1.4.1.81.2.6.22 | lntGroupFOIRLPlusMode | 0 | 0 | Value On of this attribute defines FOIRL of a sensor. When this attribute has value ON, FOIRL Plus mode is enabled, while value … |
| 1.3.6.1.4.1.81.2.6.23 | lntGroupLATStatus | 0 | 0 | Value ON of this attribute means that LAT protocol is Enabled on the LANNET Ethernet module. |
| 1.3.6.1.4.1.81.2.6.24 | lntGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
| 1.3.6.1.4.1.81.2.6.25 | lntGroupOperationMode | 0 | 0 | This attribute describes the operation mode of the module in a multiprocessor configuration sensor, as reported by interprocesso… |
| 1.3.6.1.4.1.81.2.6.26 | lntGroupCommunicationStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |
| 1.3.6.1.4.1.81.2.6.27 | lntGroupHardwareStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.81.2.6.38 | trGroupHardwareStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |