This attribute defines the status of ports that may be part of a redundan-
cy scheme.
NotActive - indicates a disabled port which cannot transmit or receive pac-
kets even if included in a redundancy scheme.
Dormant - indicates an enabled port which does not transmit or receive pac-
kets, but because it is included in a redundancy scheme, it may at any moment
become responsible packet transmission and reception.
Active - indicates that the port transmits and receives packets, serving as the
main path in the redundant configuration.
Parsed from file LANNET-MIB.mib
Module: LANNET-MIB
lntPortActivityStatus OBJECT-TYPE SYNTAX INTEGER { notActive(1), dormant(2), active(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute defines the status of ports that may be part of a redundan- cy scheme. NotActive - indicates a disabled port which cannot transmit or receive pac- kets even if included in a redundancy scheme. Dormant - indicates an enabled port which does not transmit or receive pac- kets, but because it is included in a redundancy scheme, it may at any moment become responsible packet transmission and reception. Active - indicates that the port transmits and receives packets, serving as the main path in the redundant configuration." ::= { lntPortTable 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.2.7.1 | lntPortType | 0 | 0 | Attribute describing the type of LANNET port. |
1.3.6.1.4.1.81.2.7.2 | lntPortJabber | 0 | 0 | Value ON of this attribute reflects jabber transmitted to the port by the hardware of a LANNET repeater or transceiver, as a res… |
1.3.6.1.4.1.81.2.7.3 | lntPortNoAUILoop | 0 | 0 | Value ON of this attribute indicates that a No AUI Loop fault condition was detected on an AUI repeater port. Valid for LE-10C f… |
1.3.6.1.4.1.81.2.7.4 | lntPortFunctionalStatus | 0 | 0 | The value of this attribute reflects the functional status of LANNET synchronous ports. Note that it is not mandatory that all p… |
1.3.6.1.4.1.81.2.7.5 | lntPortManPart | 0 | 0 | Setting to the value of this attribute to ON activates the manual partition mechanism at the port level. Setting the value of t… |
1.3.6.1.4.1.81.2.7.6 | lntPortLinkTest | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.7 | lntPortPeer | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.8 | lntPortAgent | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.9 | lntPortAgentAddr | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.11 | lntPortGroupId | 0 | 0 | Id of the group to which the port belongs. |
1.3.6.1.4.1.81.2.7.12 | lntPortId | 0 | 0 | Unique Id of the port in the lntPortTable. |
1.3.6.1.4.1.81.2.7.13 | lntPortDescr | 0 | 0 | Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications. |
1.3.6.1.4.1.81.2.7.14 | lntPortIntPortConnection | 0 | 0 | The value of this attribute defines the internal port to which the port is connected. |