The value of this attribute reflects the functional status of LANNET
synchronous ports. Note that it is not mandatory that all ports
support all the enumerated states. Here is the minimal set possible
states:
OK - fully functional port, transmitting and receiving packets.
RLD - receive link down condition on the port.
TLD - transmit link down condition on the port.
LocalJabber - fault condition indicating that the port emitted jabber.
RemoteJabber - fault condition indicating that remote jabber was sensed
at the port.
IllSeq - Fault condition indicating an illegal synchronization sequence
at the port.
ShortCircuit - short-circuit fault condition detected at the port.
Parsed from file LANNET-MIB.mib
Module: LANNET-MIB
lntPortFunctionalStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), rld(1), localJabber(2), tld(3), remoteJabber(4), illSeq(5), shortCirq(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this attribute reflects the functional status of LANNET synchronous ports. Note that it is not mandatory that all ports support all the enumerated states. Here is the minimal set possible states: OK - fully functional port, transmitting and receiving packets. RLD - receive link down condition on the port. TLD - transmit link down condition on the port. LocalJabber - fault condition indicating that the port emitted jabber. RemoteJabber - fault condition indicating that remote jabber was sensed at the port. IllSeq - Fault condition indicating an illegal synchronization sequence at the port. ShortCircuit - short-circuit fault condition detected at the port." ::= { lntPortTable 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.2.7.1 | lntPortType | 0 | 0 | Attribute describing the type of LANNET port. |
1.3.6.1.4.1.81.2.7.2 | lntPortJabber | 0 | 0 | Value ON of this attribute reflects jabber transmitted to the port by the hardware of a LANNET repeater or transceiver, as a res… |
1.3.6.1.4.1.81.2.7.3 | lntPortNoAUILoop | 0 | 0 | Value ON of this attribute indicates that a No AUI Loop fault condition was detected on an AUI repeater port. Valid for LE-10C f… |
1.3.6.1.4.1.81.2.7.5 | lntPortManPart | 0 | 0 | Setting to the value of this attribute to ON activates the manual partition mechanism at the port level. Setting the value of t… |
1.3.6.1.4.1.81.2.7.6 | lntPortLinkTest | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.7 | lntPortPeer | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.8 | lntPortAgent | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.9 | lntPortAgentAddr | 0 | 0 | None |
1.3.6.1.4.1.81.2.7.10 | lntPortActivityStatus | 0 | 0 | This attribute defines the status of ports that may be part of a redundan- cy scheme. NotActive - indicates a disabled port which… |
1.3.6.1.4.1.81.2.7.11 | lntPortGroupId | 0 | 0 | Id of the group to which the port belongs. |
1.3.6.1.4.1.81.2.7.12 | lntPortId | 0 | 0 | Unique Id of the port in the lntPortTable. |
1.3.6.1.4.1.81.2.7.13 | lntPortDescr | 0 | 0 | Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications. |
1.3.6.1.4.1.81.2.7.14 | lntPortIntPortConnection | 0 | 0 | The value of this attribute defines the internal port to which the port is connected. |