trGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TRGroupEntry ACCESS not-accessible STATUS mandatory ::= { trSpecific 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.3.1.1 | trGroupID | 0 | 0 | Unique ID of the group in trGroupTable. Equivalent to slot number in LANNET enclosures. |
| 1.3.6.1.4.1.81.3.1.2 | trGroupNumberOfPorts | 0 | 0 | Number of ports in group. Range 1..255. It is assumed that on each group the ports are assigned unique numbers in the range from… |
| 1.3.6.1.4.1.81.3.1.3 | trGroupAutoMan | 0 | 0 | This attribute reflects the status of the Auto/Manual switch which defines the working mode of LANNET sensors. In the MANUAL mod… |
| 1.3.6.1.4.1.81.3.1.4 | trGroupReset | 0 | 0 | Setting the value of this attribute to ON is interpreted as a software RESET command. Sensor software is reinitialised and acord… |
| 1.3.6.1.4.1.81.3.1.5 | trGroupHWVersion | 0 | 0 | ASCII string for description and display of the sensor hardware version, as it is known to the agent software. |
| 1.3.6.1.4.1.81.3.1.6 | trGroupSWVersion | 0 | 0 | ASCII string for description and display of the sensor application soft- ware version. |
| 1.3.6.1.4.1.81.3.1.7 | trGroupKernelVersion | 0 | 0 | ASCII string for description and display of the sensor kernel software version. |
| 1.3.6.1.4.1.81.3.1.8 | trGroupType | 0 | 0 | Attribute describing the type of LANNET token ring group. |
| 1.3.6.1.4.1.81.3.1.9 | trGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a token ring group in in- ternal LANNET application format. |
| 1.3.6.1.4.1.81.3.1.10 | trGroupAutoRightLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense t… |
| 1.3.6.1.4.1.81.3.1.11 | trGroupAutoLeftLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense t… |
| 1.3.6.1.4.1.81.3.1.12 | trGroupManRightloop | 0 | 0 | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ri… |
| 1.3.6.1.4.1.81.3.1.13 | trGroupManLeftLoop | 0 | 0 | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ri… |
| 1.3.6.1.4.1.81.3.1.14 | trGroupRightNeigbour | 0 | 0 | Attribute defining the existence of a neighbor another token ring group on the right hand side of the module. |
| 1.3.6.1.4.1.81.3.1.15 | trGroupLeftNeigbour | 0 | 0 | Attribute defining the existence of a neighbor another token ring group on the left hand side of the module. |
| 1.3.6.1.4.1.81.3.1.16 | trGroupIoMode | 0 | 0 | Attribute defining the I/O mode (single, dual-ring-in, dual-ring-out) Lobe, Internal Repeater or Star) of a module from the the … |
| 1.3.6.1.4.1.81.3.1.17 | trGroupRingSpeed | 0 | 0 | Attribute describing the bandwidth of the ring. In case of bridges it describes the speed of the first ring. |
| 1.3.6.1.4.1.81.3.1.18 | trGroupTxLinkDown | 0 | 0 | Value ON of this attribute defines a TxLinkDown fault condition on a LANNET Token Ring repeater module. |
| 1.3.6.1.4.1.81.3.1.19 | trGroupRxLinkDown | 0 | 0 | Value ON of this attribute defines an RxLinkDown fault condition on a LANNET Token Ring repeater module. |
| 1.3.6.1.4.1.81.3.1.20 | trGroupManLinkLoop | 0 | 0 | Setting the value of this attribute to ON instructs the hardware of a LANNET Token Ring repeater module to close the loop in the… |
| 1.3.6.1.4.1.81.3.1.21 | trGroupManBusLoop | 0 | 0 | Setting the value of this attribute to ON instructs the hardware of a LANNET Token Ring repeater module to close the loop in the… |
| 1.3.6.1.4.1.81.3.1.22 | trGroupAutoLinkLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardwar of the LANNET Token Rin… |
| 1.3.6.1.4.1.81.3.1.23 | trGroupAutoBusLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardware of the LANNET Token Ri… |
| 1.3.6.1.4.1.81.3.1.24 | trGroupIOModeF | 0 | 0 | Attribute defining the I/O mode (Ring-in, Ring-out) of a LANNET Token Ring repeater. |
| 1.3.6.1.4.1.81.3.1.25 | trGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.3.1.26 | trGroupAgentIfType | 0 | 0 | This attribute describes the interfaces of agents eventually existing on LANNET modules and their type. Value none defines the l… |
| 1.3.6.1.4.1.81.3.1.27 | trGroupAgentAddress | 0 | 0 | This attribute defines an unique address by which the agent may be addres- sed by the management console. The address format sho… |
| 1.3.6.1.4.1.81.3.1.28 | trGroupSecondRingSpeed | 0 | 0 | Attribute describing bandwidth of the ring. In case of bridges it describes the speed of the second ring. |
| 1.3.6.1.4.1.81.3.1.29 | trGroupBridgeMode | 0 | 0 | Attribute describing the operational mode of the bridge. For ITLB the following modes are defined: - Mode A: First channel connec… |
| 1.3.6.1.4.1.81.3.1.30 | trGroupFirstRingInserted | 0 | 0 | Attribute describing that the first ring in the case of a bridge requires or not insertion. |
| 1.3.6.1.4.1.81.3.1.31 | trGroupSecondRingInserted | 0 | 0 | Attribute describing that the second ring in the case of a bridge requires or not insertion. |
| 1.3.6.1.4.1.81.3.1.32 | trGroupStandAloneModeSwitch | 0 | 0 | Value On of this attribute defines Stand Alone Mode of a sensor. Internal ports are disabled and the card functions in a local s… |
| 1.3.6.1.4.1.81.3.1.33 | trGroupRedun12 | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between synchronous external ports 1 and 2 on a LANNET module. |
| 1.3.6.1.4.1.81.3.1.34 | trGroupRedun34 | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between synchronous external ports 3 and 4 on a LANNET module. |
| 1.3.6.1.4.1.81.3.1.35 | trGroupSuperRedundancy | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between all the internal ports on a LANNET module. By default… |
| 1.3.6.1.4.1.81.3.1.36 | trGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
| 1.3.6.1.4.1.81.3.1.37 | trGroupCommunicationStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.3.2 | trPortTable | 10 | 10 | None |
| 1.3.6.1.4.1.81.3.3 | trIntPortTable | 1 | 5 | None |
| 1.3.6.1.4.1.81.3.4 | trRingTable | 1 | 5 | None |