This attribute reflects the status of the Auto/Manual switch which defines
the working mode of LANNET sensors. In the MANUAL mode no set
operations may be performed on attributes related to the sensor. The
sensor works according to configuration switches set by hardware and
transmits all configuration information to the agent. In the AUTO mode,
hardware switches are overridden by set commands.
Parsed from file LANNET-MIB.mib
Module: LANNET-MIB
trGroupAutoMan OBJECT-TYPE SYNTAX INTEGER { man(0), auto(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the status of the Auto/Manual switch which defines the working mode of LANNET sensors. In the MANUAL mode no set operations may be performed on attributes related to the sensor. The sensor works according to configuration switches set by hardware and transmits all configuration information to the agent. In the AUTO mode, hardware switches are overridden by set commands." ::= { trGroupTable 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.3.1.1 | trGroupID | 0 | 0 | Unique ID of the group in trGroupTable. Equivalent to slot number in LANNET enclosures. |
1.3.6.1.4.1.81.3.1.2 | trGroupNumberOfPorts | 0 | 0 | Number of ports in group. Range 1..255. It is assumed that on each group the ports are assigned unique numbers in the range from… |
1.3.6.1.4.1.81.3.1.4 | trGroupReset | 0 | 0 | Setting the value of this attribute to ON is interpreted as a software RESET command. Sensor software is reinitialised and acord… |
1.3.6.1.4.1.81.3.1.5 | trGroupHWVersion | 0 | 0 | ASCII string for description and display of the sensor hardware version, as it is known to the agent software. |
1.3.6.1.4.1.81.3.1.6 | trGroupSWVersion | 0 | 0 | ASCII string for description and display of the sensor application soft- ware version. |
1.3.6.1.4.1.81.3.1.7 | trGroupKernelVersion | 0 | 0 | ASCII string for description and display of the sensor kernel software version. |
1.3.6.1.4.1.81.3.1.8 | trGroupType | 0 | 0 | Attribute describing the type of LANNET token ring group. |
1.3.6.1.4.1.81.3.1.9 | trGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a token ring group in in- ternal LANNET application format. |
1.3.6.1.4.1.81.3.1.10 | trGroupAutoRightLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense t… |
1.3.6.1.4.1.81.3.1.11 | trGroupAutoLeftLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense t… |
1.3.6.1.4.1.81.3.1.12 | trGroupManRightloop | 0 | 0 | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ri… |
1.3.6.1.4.1.81.3.1.13 | trGroupManLeftLoop | 0 | 0 | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ri… |
1.3.6.1.4.1.81.3.1.14 | trGroupRightNeigbour | 0 | 0 | Attribute defining the existence of a neighbor another token ring group on the right hand side of the module. |
1.3.6.1.4.1.81.3.1.15 | trGroupLeftNeigbour | 0 | 0 | Attribute defining the existence of a neighbor another token ring group on the left hand side of the module. |
1.3.6.1.4.1.81.3.1.16 | trGroupIoMode | 0 | 0 | Attribute defining the I/O mode (single, dual-ring-in, dual-ring-out) Lobe, Internal Repeater or Star) of a module from the the … |
1.3.6.1.4.1.81.3.1.17 | trGroupRingSpeed | 0 | 0 | Attribute describing the bandwidth of the ring. In case of bridges it describes the speed of the first ring. |
1.3.6.1.4.1.81.3.1.18 | trGroupTxLinkDown | 0 | 0 | Value ON of this attribute defines a TxLinkDown fault condition on a LANNET Token Ring repeater module. |
1.3.6.1.4.1.81.3.1.19 | trGroupRxLinkDown | 0 | 0 | Value ON of this attribute defines an RxLinkDown fault condition on a LANNET Token Ring repeater module. |
1.3.6.1.4.1.81.3.1.20 | trGroupManLinkLoop | 0 | 0 | Setting the value of this attribute to ON instructs the hardware of a LANNET Token Ring repeater module to close the loop in the… |
1.3.6.1.4.1.81.3.1.21 | trGroupManBusLoop | 0 | 0 | Setting the value of this attribute to ON instructs the hardware of a LANNET Token Ring repeater module to close the loop in the… |
1.3.6.1.4.1.81.3.1.22 | trGroupAutoLinkLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardwar of the LANNET Token Rin… |
1.3.6.1.4.1.81.3.1.23 | trGroupAutoBusLoop | 0 | 0 | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardware of the LANNET Token Ri… |
1.3.6.1.4.1.81.3.1.24 | trGroupIOModeF | 0 | 0 | Attribute defining the I/O mode (Ring-in, Ring-out) of a LANNET Token Ring repeater. |
1.3.6.1.4.1.81.3.1.25 | trGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
1.3.6.1.4.1.81.3.1.26 | trGroupAgentIfType | 0 | 0 | This attribute describes the interfaces of agents eventually existing on LANNET modules and their type. Value none defines the l… |
1.3.6.1.4.1.81.3.1.27 | trGroupAgentAddress | 0 | 0 | This attribute defines an unique address by which the agent may be addres- sed by the management console. The address format sho… |
1.3.6.1.4.1.81.3.1.28 | trGroupSecondRingSpeed | 0 | 0 | Attribute describing bandwidth of the ring. In case of bridges it describes the speed of the second ring. |
1.3.6.1.4.1.81.3.1.29 | trGroupBridgeMode | 0 | 0 | Attribute describing the operational mode of the bridge. For ITLB the following modes are defined: - Mode A: First channel connec… |
1.3.6.1.4.1.81.3.1.30 | trGroupFirstRingInserted | 0 | 0 | Attribute describing that the first ring in the case of a bridge requires or not insertion. |
1.3.6.1.4.1.81.3.1.31 | trGroupSecondRingInserted | 0 | 0 | Attribute describing that the second ring in the case of a bridge requires or not insertion. |
1.3.6.1.4.1.81.3.1.32 | trGroupStandAloneModeSwitch | 0 | 0 | Value On of this attribute defines Stand Alone Mode of a sensor. Internal ports are disabled and the card functions in a local s… |
1.3.6.1.4.1.81.3.1.33 | trGroupRedun12 | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between synchronous external ports 1 and 2 on a LANNET module. |
1.3.6.1.4.1.81.3.1.34 | trGroupRedun34 | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between synchronous external ports 3 and 4 on a LANNET module. |
1.3.6.1.4.1.81.3.1.35 | trGroupSuperRedundancy | 0 | 0 | Value ON of this attribute defines a redundancy (back-up) relation between all the internal ports on a LANNET module. By default… |
1.3.6.1.4.1.81.3.1.36 | trGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
1.3.6.1.4.1.81.3.1.37 | trGroupCommunicationStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |