Group eavesdropping security mode (not supported or
Security Bypass or Secure) assigned to this module.
Security Bypass - all ports in this group are not secure.
Secure - ports in this group will perform security as defined
per port, in the port level.
This attribute can be assigned to security modules.
The information is coded in internal proprierty format.
Parsed from file Config.mib.txt
Company: None
Module: CONFIG-MIB
Group eavesdropping security mode (not supported or
Security Bypass or Secure) assigned to this module.
Security Bypass - all ports in this group are not secure.
Secure - ports in this group will perform security as defined
per port, in the port level.
This attribute can be assigned to security modules.
The information is coded in internal proprierty format.
Parsed from file CONFIG-MIB.mib
Module: CONFIG-MIB
Vendor: Avaya
Module: CONFIG-MIB (Config.mib)
Type: TABULAR
Access: read-write
Syntax: OCTET STRING
Automatically extracted from www.mibdepot.com
genGroupEavesdropping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Group eavesdropping security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports in this group are not secure. Secure - ports in this group will perform security as defined per port, in the port level. This attribute can be assigned to security modules. The information is coded in internal proprierty format." ::= { genGroupEntry 29 }
genGroupEavesdropping OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Group eavesdropping security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports in this group are not secure. Secure - ports in this group will perform security as defined per port, in the port level. This attribute can be assigned to security modules. The information is coded in internal proprierty format." ::= { genGroupEntry 29 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.8.1.1.1 | genGroupId | 0 | 0 | Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by … |
| 1.3.6.1.4.1.81.8.1.1.2 | genGroupSWVersion | 0 | 0 | ASCII string for description and display of the group software version. |
| 1.3.6.1.4.1.81.8.1.1.3 | genGroupKernelVersion | 0 | 0 | ASCII string for description and display of the group kernel version. |
| 1.3.6.1.4.1.81.8.1.1.4 | genGroupType | 0 | 0 | Attribute describing the type of the group (module). |
| 1.3.6.1.4.1.81.8.1.1.5 | genGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.8.1.1.6 | genGroupNumberOfPorts | 0 | 0 | Number of ports in group. It is assumed that on each group the ports are assigned unique numbers in the range from 1 to genGroup… |
| 1.3.6.1.4.1.81.8.1.1.7 | genGroupNumberOfIntPorts | 0 | 0 | Number of internal ports (ports connected to the chassis buses) on the module. |
| 1.3.6.1.4.1.81.8.1.1.8 | genGroupReset | 0 | 0 | Setting the value of this attribute to 'on' is interpreted as a software RESET command. Sensor software is reinitialized and acc… |
| 1.3.6.1.4.1.81.8.1.1.9 | genGroupAutoMan | 0 | 0 | This attribute reflects the status of the Auto/Manual switch which defines the working mode of sensors. In the MANUAL mode no s… |
| 1.3.6.1.4.1.81.8.1.1.10 | genGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a group in internal application format. |
| 1.3.6.1.4.1.81.8.1.1.11 | genGroupRedun12 | 0 | 0 | Value on(1) of this attribute defines a redundancy (backup) relationship between synchronous external ports 1 and 2 on a module… |
| 1.3.6.1.4.1.81.8.1.1.12 | genGroupRedun34 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 3 and 4 on a module. |
| 1.3.6.1.4.1.81.8.1.1.13 | genGroupRedun13-14 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 13 and 14 on a module. |
| 1.3.6.1.4.1.81.8.1.1.14 | genGroupStandAloneMode | 0 | 0 | Value ON of this attribute indicates the sensor's operation Stand Alone mode . Internal ports are disabled and the card function… |
| 1.3.6.1.4.1.81.8.1.1.15 | genGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
| 1.3.6.1.4.1.81.8.1.1.16 | genGroupCommStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |
| 1.3.6.1.4.1.81.8.1.1.17 | genGroupHWStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.81.8.1.1.18 | genGroupSupplyVoltageFault | 0 | 0 | A value 'on' of this attribute informs of a 'voltage supply out-of-range' error condition on sensor equipped with hardware which … |
| 1.3.6.1.4.1.81.8.1.1.19 | genGroupIntTemp | 0 | 0 | Internal temperature of the enclosure as measured by the specific module instance.Value '999' means not supported. |
| 1.3.6.1.4.1.81.8.1.1.20 | genGroupSpecificOID | 0 | 0 | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.8.1.1.21 | genGroupConfigurationSymbol | 0 | 0 | Defines the Configuration Symbol attached to any hardware module manufactured. One single character A..Z defines the CS version.… |
| 1.3.6.1.4.1.81.8.1.1.22 | genGroupLastChange | 0 | 0 | This attribute contains the value of sysUpTime at the time any change pertaining to the specified group occurred. |
| 1.3.6.1.4.1.81.8.1.1.23 | genGroupRedunRecovery | 0 | 0 | This attribute is relevant for the cards with redundancy feature (LTR-108F). It defines the behaviour in case of main port failu… |
| 1.3.6.1.4.1.81.8.1.1.24 | genGroupHWVersion | 0 | 0 | Defines the Hardware version of the module. Current modules use a single character A - D. Very old modules which do not support t… |
| 1.3.6.1.4.1.81.8.1.1.25 | genGroupHeight | 0 | 0 | This item describes the physical height of the module in Us (1U=1.75''). |
| 1.3.6.1.4.1.81.8.1.1.26 | genGroupWidth | 0 | 0 | This item describes the physical width of the module in HP units (1HP=0.5 mm). |
| 1.3.6.1.4.1.81.8.1.1.27 | genGroupIntrusionControl | 0 | 0 | Group intrusion security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports i… |
| 1.3.6.1.4.1.81.8.1.1.28 | genGroupThresholdStatus | 0 | 0 | This item is a bitmap that defines the threshold status of the module, in relation to the alarmPolicyTable. If the ring is monito… |
| 1.3.6.1.4.1.81.8.1.1.30 | genGroupMainSWVersion | 0 | 0 | ASCII string for description and display of the main CPU software version in modules that utilize more than one management proce… |
| 1.3.6.1.4.1.81.8.1.1.31 | genGroupMPSActivityStatus | 0 | 0 | This attribute defines the status of the main PS inside the stackable hub. |
| 1.3.6.1.4.1.81.8.1.1.32 | genGroupBUPSActivityStatus | 0 | 0 | This attribute defines the status of the backup PS externally connected to the module. |
| 1.3.6.1.4.1.81.8.1.1.33 | genGroupPrepareCounters | 0 | 0 | This item should help the agent to prepare a large amount of counters. The agent should reset this value to none(1), when it has … |
| 1.3.6.1.4.1.81.8.1.1.34 | genGroupPortLastChange | 0 | 0 | This item contains the last two bytes of the TimeStamp of the last change of each port as follows: Bytes 0 -1: port 1, Bytes 2 -3:… |
| 1.3.6.1.4.1.81.8.1.1.35 | genGroupIntPortLastChange | 0 | 0 | This item contains the last two bytes of the TimeStamp of the last change of each internal port as follows: Bytes 0 -1: internal … |
| 1.3.6.1.4.1.81.8.1.1.36 | genGroupFaultMask | 0 | 0 | Each bit of this item describes the situation of the group regarding specific fault. For example: bit 1: on indicates 'module int… |
| 1.3.6.1.4.1.81.8.1.1.37 | genGroupTypeName | 0 | 0 | String with the module name. |
| 1.3.6.1.4.1.81.8.1.1.38 | genGroupAgentSlot | 0 | 0 | This attribute defines the slot number of the Agent supporting this group. If there is multiplexor, than the value will be the m… |
| 1.3.6.1.4.1.81.8.1.1.39 | genGroupMngType | 0 | 0 | This attribute defines the management type of the module. |
| 1.3.6.1.4.1.81.8.1.1.40 | genGroupNumberOfLogicalPorts | 0 | 0 | Number of logical ports in group. The logical ports represent the Link Aggregation Groups (LAGs) associated with that module/swit… |
| 1.3.6.1.4.1.81.8.1.1.41 | genGroupNumberOfInterfaces | 0 | 0 | The number of network interfaces (regardless of their current state) present on this module. This will help determined the ifNum… |
| 1.3.6.1.4.1.81.8.1.1.42 | genGroupCascadUpStatus | 0 | 0 | The functional status of the P330 two cascading-up ports: ok(1) - fully functional ports, transmitting and receiving packets. rld… |
| 1.3.6.1.4.1.81.8.1.1.43 | genGroupCascadDownStatus | 0 | 0 | The functional status of the P330 two cascading-down ports: ok(1) - fully functional ports, transmitting and receiving packets. r… |
| 1.3.6.1.4.1.81.8.1.1.44 | genGroupSTARootPortID | 0 | 0 | The port ID. Number through which the STA Root bridge can be reached. If it is one of the P330 backplane port, its port id. will… |
| 1.3.6.1.4.1.81.8.1.1.45 | genGroupCopyPortInstruction | 0 | 0 | This variable is used internally by the P330 Master for sending a contracted instruction code to every Slave agent of the stack.… |
| 1.3.6.1.4.1.81.8.1.1.46 | genGroupLicenseKey | 0 | 0 | This MIB item contains the authorization key for SMON application, and for other applications in the future. |
| 1.3.6.1.4.1.81.8.1.1.47 | genGroupLogFileClear | 0 | 0 | This attribute enables the user to clear all the log files attached of a specific module. |
| 1.3.6.1.4.1.81.8.1.1.48 | genGroupBootVersion | 0 | 0 | ASCII string for description and display of the booter version of the module. |
| 1.3.6.1.4.1.81.8.1.1.49 | genGroupResetLastStamp | 0 | 0 | This attribute contains the value of sysUpTime at the time it polled |
| 1.3.6.1.4.1.81.8.1.1.50 | genGroupSerialNumber | 0 | 0 | The burnt-in identifier of the device. This is a unique 7-digits number |
| 1.3.6.1.4.1.81.8.1.1.51 | genGroupShowModuleInformation | 0 | 0 | String that includes all information of the Show Module CLI Command. TAB String indicates new column, while CR String indicates … |
| 1.3.6.1.4.1.81.8.1.1.52 | genGroupCascadingUpFault | 0 | 0 | Enable /Disable the sending of cascading up fault traps for this module. |
| 1.3.6.1.4.1.81.8.1.1.53 | genGroupCascadingDownFault | 0 | 0 | Enable /Disable the sending of cascading down fault traps for this module. |
| 1.3.6.1.4.1.81.8.1.1.54 | genGroupPortClassificationMask | 0 | 0 | This is a mask of the port classification values of all ports of this module. The index of the bits starts from 0, where bit 0 i… |