This attribute contains the value of sysUpTime at the time it polled
Parsed from file Config.mib.txt
Company: None
Module: CONFIG-MIB
This attribute contains the value of sysUpTime at the time it polled
Parsed from file CONFIG-MIB.mib
Module: CONFIG-MIB
Vendor: Avaya
Module: CONFIG-MIB (Config.mib)
Type: TABULAR
Access: read-only
Syntax: TimeTicks
Automatically extracted from www.mibdepot.com
genGroupResetLastStamp OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of sysUpTime at the time it polled" ::= { genGroupEntry 49 }
genGroupResetLastStamp OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of sysUpTime at the time it polled" ::= { genGroupEntry 49 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.8.1.1.1 | genGroupId | 0 | 0 | Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by … |
| 1.3.6.1.4.1.81.8.1.1.2 | genGroupSWVersion | 0 | 0 | ASCII string for description and display of the group software version. |
| 1.3.6.1.4.1.81.8.1.1.3 | genGroupKernelVersion | 0 | 0 | ASCII string for description and display of the group kernel version. |
| 1.3.6.1.4.1.81.8.1.1.4 | genGroupType | 0 | 0 | Attribute describing the type of the group (module). |
| 1.3.6.1.4.1.81.8.1.1.5 | genGroupDescr | 0 | 0 | Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.8.1.1.6 | genGroupNumberOfPorts | 0 | 0 | Number of ports in group. It is assumed that on each group the ports are assigned unique numbers in the range from 1 to genGroup… |
| 1.3.6.1.4.1.81.8.1.1.7 | genGroupNumberOfIntPorts | 0 | 0 | Number of internal ports (ports connected to the chassis buses) on the module. |
| 1.3.6.1.4.1.81.8.1.1.8 | genGroupReset | 0 | 0 | Setting the value of this attribute to 'on' is interpreted as a software RESET command. Sensor software is reinitialized and acc… |
| 1.3.6.1.4.1.81.8.1.1.9 | genGroupAutoMan | 0 | 0 | This attribute reflects the status of the Auto/Manual switch which defines the working mode of sensors. In the MANUAL mode no s… |
| 1.3.6.1.4.1.81.8.1.1.10 | genGroupFullConfig | 0 | 0 | Attribute describing the full configuration of a group in internal application format. |
| 1.3.6.1.4.1.81.8.1.1.11 | genGroupRedun12 | 0 | 0 | Value on(1) of this attribute defines a redundancy (backup) relationship between synchronous external ports 1 and 2 on a module… |
| 1.3.6.1.4.1.81.8.1.1.12 | genGroupRedun34 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 3 and 4 on a module. |
| 1.3.6.1.4.1.81.8.1.1.13 | genGroupRedun13-14 | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 13 and 14 on a module. |
| 1.3.6.1.4.1.81.8.1.1.14 | genGroupStandAloneMode | 0 | 0 | Value ON of this attribute indicates the sensor's operation Stand Alone mode . Internal ports are disabled and the card function… |
| 1.3.6.1.4.1.81.8.1.1.15 | genGroupInterProcCommStatus | 0 | 0 | This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the … |
| 1.3.6.1.4.1.81.8.1.1.16 | genGroupCommStatus | 0 | 0 | This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent. |
| 1.3.6.1.4.1.81.8.1.1.17 | genGroupHWStatus | 0 | 0 | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.81.8.1.1.18 | genGroupSupplyVoltageFault | 0 | 0 | A value 'on' of this attribute informs of a 'voltage supply out-of-range' error condition on sensor equipped with hardware which … |
| 1.3.6.1.4.1.81.8.1.1.19 | genGroupIntTemp | 0 | 0 | Internal temperature of the enclosure as measured by the specific module instance.Value '999' means not supported. |
| 1.3.6.1.4.1.81.8.1.1.20 | genGroupSpecificOID | 0 | 0 | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.8.1.1.21 | genGroupConfigurationSymbol | 0 | 0 | Defines the Configuration Symbol attached to any hardware module manufactured. One single character A..Z defines the CS version.… |
| 1.3.6.1.4.1.81.8.1.1.22 | genGroupLastChange | 0 | 0 | This attribute contains the value of sysUpTime at the time any change pertaining to the specified group occurred. |
| 1.3.6.1.4.1.81.8.1.1.23 | genGroupRedunRecovery | 0 | 0 | This attribute is relevant for the cards with redundancy feature (LTR-108F). It defines the behaviour in case of main port failu… |
| 1.3.6.1.4.1.81.8.1.1.24 | genGroupHWVersion | 0 | 0 | Defines the Hardware version of the module. Current modules use a single character A - D. Very old modules which do not support t… |
| 1.3.6.1.4.1.81.8.1.1.25 | genGroupHeight | 0 | 0 | This item describes the physical height of the module in Us (1U=1.75''). |
| 1.3.6.1.4.1.81.8.1.1.26 | genGroupWidth | 0 | 0 | This item describes the physical width of the module in HP units (1HP=0.5 mm). |
| 1.3.6.1.4.1.81.8.1.1.27 | genGroupIntrusionControl | 0 | 0 | Group intrusion security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports i… |
| 1.3.6.1.4.1.81.8.1.1.28 | genGroupThresholdStatus | 0 | 0 | This item is a bitmap that defines the threshold status of the module, in relation to the alarmPolicyTable. If the ring is monito… |
| 1.3.6.1.4.1.81.8.1.1.29 | genGroupEavesdropping | 0 | 0 | Group eavesdropping security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all por… |
| 1.3.6.1.4.1.81.8.1.1.30 | genGroupMainSWVersion | 0 | 0 | ASCII string for description and display of the main CPU software version in modules that utilize more than one management proce… |
| 1.3.6.1.4.1.81.8.1.1.31 | genGroupMPSActivityStatus | 0 | 0 | This attribute defines the status of the main PS inside the stackable hub. |
| 1.3.6.1.4.1.81.8.1.1.32 | genGroupBUPSActivityStatus | 0 | 0 | This attribute defines the status of the backup PS externally connected to the module. |
| 1.3.6.1.4.1.81.8.1.1.33 | genGroupPrepareCounters | 0 | 0 | This item should help the agent to prepare a large amount of counters. The agent should reset this value to none(1), when it has … |
| 1.3.6.1.4.1.81.8.1.1.34 | genGroupPortLastChange | 0 | 0 | This item contains the last two bytes of the TimeStamp of the last change of each port as follows: Bytes 0 -1: port 1, Bytes 2 -3:… |
| 1.3.6.1.4.1.81.8.1.1.35 | genGroupIntPortLastChange | 0 | 0 | This item contains the last two bytes of the TimeStamp of the last change of each internal port as follows: Bytes 0 -1: internal … |
| 1.3.6.1.4.1.81.8.1.1.36 | genGroupFaultMask | 0 | 0 | Each bit of this item describes the situation of the group regarding specific fault. For example: bit 1: on indicates 'module int… |
| 1.3.6.1.4.1.81.8.1.1.37 | genGroupTypeName | 0 | 0 | String with the module name. |
| 1.3.6.1.4.1.81.8.1.1.38 | genGroupAgentSlot | 0 | 0 | This attribute defines the slot number of the Agent supporting this group. If there is multiplexor, than the value will be the m… |
| 1.3.6.1.4.1.81.8.1.1.39 | genGroupMngType | 0 | 0 | This attribute defines the management type of the module. |
| 1.3.6.1.4.1.81.8.1.1.40 | genGroupNumberOfLogicalPorts | 0 | 0 | Number of logical ports in group. The logical ports represent the Link Aggregation Groups (LAGs) associated with that module/swit… |
| 1.3.6.1.4.1.81.8.1.1.41 | genGroupNumberOfInterfaces | 0 | 0 | The number of network interfaces (regardless of their current state) present on this module. This will help determined the ifNum… |
| 1.3.6.1.4.1.81.8.1.1.42 | genGroupCascadUpStatus | 0 | 0 | The functional status of the P330 two cascading-up ports: ok(1) - fully functional ports, transmitting and receiving packets. rld… |
| 1.3.6.1.4.1.81.8.1.1.43 | genGroupCascadDownStatus | 0 | 0 | The functional status of the P330 two cascading-down ports: ok(1) - fully functional ports, transmitting and receiving packets. r… |
| 1.3.6.1.4.1.81.8.1.1.44 | genGroupSTARootPortID | 0 | 0 | The port ID. Number through which the STA Root bridge can be reached. If it is one of the P330 backplane port, its port id. will… |
| 1.3.6.1.4.1.81.8.1.1.45 | genGroupCopyPortInstruction | 0 | 0 | This variable is used internally by the P330 Master for sending a contracted instruction code to every Slave agent of the stack.… |
| 1.3.6.1.4.1.81.8.1.1.46 | genGroupLicenseKey | 0 | 0 | This MIB item contains the authorization key for SMON application, and for other applications in the future. |
| 1.3.6.1.4.1.81.8.1.1.47 | genGroupLogFileClear | 0 | 0 | This attribute enables the user to clear all the log files attached of a specific module. |
| 1.3.6.1.4.1.81.8.1.1.48 | genGroupBootVersion | 0 | 0 | ASCII string for description and display of the booter version of the module. |
| 1.3.6.1.4.1.81.8.1.1.50 | genGroupSerialNumber | 0 | 0 | The burnt-in identifier of the device. This is a unique 7-digits number |
| 1.3.6.1.4.1.81.8.1.1.51 | genGroupShowModuleInformation | 0 | 0 | String that includes all information of the Show Module CLI Command. TAB String indicates new column, while CR String indicates … |
| 1.3.6.1.4.1.81.8.1.1.52 | genGroupCascadingUpFault | 0 | 0 | Enable /Disable the sending of cascading up fault traps for this module. |
| 1.3.6.1.4.1.81.8.1.1.53 | genGroupCascadingDownFault | 0 | 0 | Enable /Disable the sending of cascading down fault traps for this module. |
| 1.3.6.1.4.1.81.8.1.1.54 | genGroupPortClassificationMask | 0 | 0 | This is a mask of the port classification values of all ports of this module. The index of the bits starts from 0, where bit 0 i… |