Minimum length of IP Address prefix to match in
routing update destinations.
Parsed from file xpolicy.mib.txt
Company: None
Module: XEDIA-POLICY-MIB
Minimum length of IP Address prefix to match in
routing update destinations.
Parsed from file XEDIA-POLICY-MIB.mib
Module: XEDIA-POLICY-MIB
Vendor: Xedia Corporation
Module: XEDIA-POLICY-MIB
[Automatically extracted from oidview.com]
xpolicyTxPrefixMin OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum length of IP Address prefix to match in routing update destinations." DEFVAL { 0 } ::= { xpolicySendEntry 20 }
xpolicyTxPrefixMin OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum length of IP Address prefix to match in routing update destinations." DEFVAL { 0 } ::= { xpolicySendEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.838.3.10.2.1.2.1.1 | xpolicyTxProtocol | 0 | 0 | The protocol identifying where the update will be sent. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.2 | xpolicyTxPeer | 0 | 0 | The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be z… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.3 | xpolicyTxName | 0 | 0 | A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, t… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.4 | xpolicyTxSrcProtocol | 0 | 0 | The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This al… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.5 | xpolicyTxSrcProtSubType | 0 | 0 | The protocol sub-type discription. Currently, this only applies to OSPF entries. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.6 | xpolicyTxAddrStart | 0 | 0 | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.7 | xpolicyTxAddrEnd | 0 | 0 | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.8 | xpolicyTxAsString | 0 | 0 | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of r… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.9 | xpolicyTxCommunityId | 0 | 0 | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.10 | xpolicyTxSendOption | 0 | 0 | Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Norma… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.11 | xpolicyTxMED | 0 | 0 | The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attache… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.12 | xpolicyTxMEDAuto | 0 | 0 | Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.13 | xpolicyTxAsPrepend | 0 | 0 | The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.14 | xpolicyTxSendCommunityId | 0 | 0 | The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), t… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.15 | xpolicyTxIgpMetric | 0 | 0 | The metric used for IGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.16 | xpolicyTxIgpMetricType | 0 | 0 | Type of metric being used. Currently, only for defining OSPF internal and external routes. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.17 | xpolicyTxIgpMetricAuto | 0 | 0 | Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.18 | xpolicyTxNextHopSelf | 0 | 0 | Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.19 | xpolicyTxRowStatus | 0 | 0 | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.21 | xpolicyTxPrefixMax | 0 | 0 | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.22 | xpolicyTxIgpMetricLevel | 0 | 0 | Level of metric being used. Only for defining ISIS level one and two routes. |