A unique name for this entry, including the optional priority number,
which can be represented in dotted notation. When used, the priority
numbers allow hiearchical matching.
Format of the string is:
Examples of strings: name, name.1, name.1.1, name.2
Parsed from file xpolicy.mib.txt
Company: None
Module: XEDIA-POLICY-MIB
A unique name for this entry, including the optional priority number,
which can be represented in dotted notation. When used, the priority
numbers allow hiearchical matching.
Format of the string is:
Examples of strings: name, name.1, name.1.1, name.2
Parsed from file XEDIA-POLICY-MIB.mib
Module: XEDIA-POLICY-MIB
Vendor: Xedia Corporation
Module: XEDIA-POLICY-MIB
[Automatically extracted from oidview.com]
xpolicyTxName OBJECT-TYPE SYNTAX XPolicyName MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is:
. Examples of strings: name, name.1, name.1.1, name.2" ::= { xpolicySendEntry 3 }
xpolicyTxName OBJECT-TYPE SYNTAX XPolicyName MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is:
. Examples of strings: name, name.1, name.1.1, name.2" ::= { xpolicySendEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.838.3.10.2.1.2.1.1 | xpolicyTxProtocol | 0 | 0 | The protocol identifying where the update will be sent. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.2 | xpolicyTxPeer | 0 | 0 | The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be z… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.4 | xpolicyTxSrcProtocol | 0 | 0 | The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This al… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.5 | xpolicyTxSrcProtSubType | 0 | 0 | The protocol sub-type discription. Currently, this only applies to OSPF entries. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.6 | xpolicyTxAddrStart | 0 | 0 | The base of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.7 | xpolicyTxAddrEnd | 0 | 0 | The end of the IP Address range to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.8 | xpolicyTxAsString | 0 | 0 | A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of r… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.9 | xpolicyTxCommunityId | 0 | 0 | Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.10 | xpolicyTxSendOption | 0 | 0 | Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Norma… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.11 | xpolicyTxMED | 0 | 0 | The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attache… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.12 | xpolicyTxMEDAuto | 0 | 0 | Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.13 | xpolicyTxAsPrepend | 0 | 0 | The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.14 | xpolicyTxSendCommunityId | 0 | 0 | The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), t… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.15 | xpolicyTxIgpMetric | 0 | 0 | The metric used for IGP. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.16 | xpolicyTxIgpMetricType | 0 | 0 | Type of metric being used. Currently, only for defining OSPF internal and external routes. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.17 | xpolicyTxIgpMetricAuto | 0 | 0 | Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set … |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.18 | xpolicyTxNextHopSelf | 0 | 0 | Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it… |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.19 | xpolicyTxRowStatus | 0 | 0 | This object is used to add and remove entries from the table. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.20 | xpolicyTxPrefixMin | 0 | 0 | Minimum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.21 | xpolicyTxPrefixMax | 0 | 0 | Maximum length of IP Address prefix to match in routing update destinations. |
| 1.3.6.1.4.1.838.3.10.2.1.2.1.22 | xpolicyTxIgpMetricLevel | 0 | 0 | Level of metric being used. Only for defining ISIS level one and two routes. |