The value of this object is the control of service
signals and command signals sent by the equipment.
The authorized values are 'none' (no service
signals are transmitted to the start-stop mode
DTE), 'servSignal-stdFormat' (service signals
other than the prompt PAD service signal are
transmitted in the standard format),
'servSignalAndPrompt-stdFormat' (service signals
and the prompt service signal are transmitted in
the standard format), 'servSignal-explicitFormat'
(service signals other than the prompt service
signal are transmitted in the explicit format),
'servSignalAndPrompt-explicitFormat' (service
signals and the prompt service signal are
transmitted in the explicit format). The default
value is 'servSignalAndPrompt-explicitFormat'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object is the control of service
signals and command signals sent by the equipment.
The authorized values are 'none' (no service
signals are transmitted to the start-stop mode
DTE), 'servSignal-stdFormat' (service signals
other than the prompt PAD service signal are
transmitted in the standard format),
'servSignalAndPrompt-stdFormat' (service signals
and the prompt service signal are transmitted in
the standard format), 'servSignal-explicitFormat'
(service signals other than the prompt service
signal are transmitted in the explicit format),
'servSignalAndPrompt-explicitFormat' (service
signals and the prompt service signal are
transmitted in the explicit format). The default
value is 'servSignalAndPrompt-explicitFormat'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclAsynCfgX3UserP06ServiceSignals OBJECT-TYPE SYNTAX INTEGER { val0-none(1), val1-servSignal-stdFormat(2), val5-servSignalAndPrompt-stdFormat(6), val9-servSignal-explicitFormat(10), val13-servSignalAndPrompt-explicitFormat(14) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the control of service signals and command signals sent by the equipment. The authorized values are 'none' (no service signals are transmitted to the start-stop mode DTE), 'servSignal-stdFormat' (service signals other than the prompt PAD service signal are transmitted in the standard format), 'servSignalAndPrompt-stdFormat' (service signals and the prompt service signal are transmitted in the standard format), 'servSignal-explicitFormat' (service signals other than the prompt service signal are transmitted in the explicit format), 'servSignalAndPrompt-explicitFormat' (service signals and the prompt service signal are transmitted in the explicit format). The default value is 'servSignalAndPrompt-explicitFormat'." ::= { fclAsynCfgX3UserProfilePart1 16 }
fclAsynCfgX3UserP06ServiceSignals OBJECT-TYPE SYNTAX INTEGER { val0-none(1), val1-servSignal-stdFormat(2), val5-servSignalAndPrompt-stdFormat(6), val9-servSignal-explicitFormat(10), val13-servSignalAndPrompt-explicitFormat(14) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the control of service signals and command signals sent by the equipment. The authorized values are 'none' (no service signals are transmitted to the start-stop mode DTE), 'servSignal-stdFormat' (service signals other than the prompt PAD service signal are transmitted in the standard format), 'servSignalAndPrompt-stdFormat' (service signals and the prompt service signal are transmitted in the standard format), 'servSignal-explicitFormat' (service signals other than the prompt service signal are transmitted in the explicit format), 'servSignalAndPrompt-explicitFormat' (service signals and the prompt service signal are transmitted in the explicit format). The default value is 'servSignalAndPrompt-explicitFormat'." ::= { fclAsynCfgX3UserProfilePart1 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.5.10.15.16.0 | fclAsynCfgX3UserP06ServiceSignals | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.5.10.15.3 | fclAsynCfgX3UserProfileId | 1 | 1 | The value of this object is 80 the number of the user profile. This profile may be used, as any other X3 profile, to make a new a… |
1.3.6.1.4.1.866.20.1.20.5.10.15.4 | fclAsynCfgX3UserProfileDesc | 1 | 1 | The value of this object stores a text description of the user profile elaborated by the user. This description may contains from… |
1.3.6.1.4.1.866.20.1.20.5.10.15.11 | fclAsynCfgX3UserP01EscapeChar | 1 | 1 | The value of this object is the character to escape from the data transfer state and to recall the PAD. The authorized values are… |
1.3.6.1.4.1.866.20.1.20.5.10.15.12 | fclAsynCfgX3UserP02Echo | 1 | 1 | The value of this object indicates whether the echo is local not. The authorized values are 'off' (echoing by the terminal), 'on'… |
1.3.6.1.4.1.866.20.1.20.5.10.15.13 | fclAsynCfgX3UserP03ForwardingChar | 1 | 1 | The value of this object is the data forwarding character(s). The authorized values are 'none' (no character), 'CR' (Carriage Ret… |
1.3.6.1.4.1.866.20.1.20.5.10.15.14 | fclAsynCfgX3UserP04IdleTimerDelay | 1 | 1 | The value of this object is the idle timer delay in twentieths of a second. The authorized values are '0..250'. The value '0' wil… |
1.3.6.1.4.1.866.20.1.20.5.10.15.15 | fclAsynCfgX3UserP05OutputFlowCtrl | 1 | 1 | The value of this object indicates the flow control type from the equipment to the terminal. The authorized values are 'none' (no… |
1.3.6.1.4.1.866.20.1.20.5.10.15.17 | fclAsynCfgX3UserP07BreakHandling | 1 | 1 | The value of this object is the selection of equipment operations on receipt of break signal from the start-stop mode DTE. The au… |
1.3.6.1.4.1.866.20.1.20.5.10.15.18 | fclAsynCfgX3UserP08OutputDiscard | 1 | 1 | The value of this object indicates whether data are sent to the terminal or not. The authorized values are 'off' (normal data del… |
1.3.6.1.4.1.866.20.1.20.5.10.15.19 | fclAsynCfgX3UserP09CrPadding | 1 | 1 | The value of this object indicates the padding after carriage return. The authorized values are '0..250'. A value between '0' and… |
1.3.6.1.4.1.866.20.1.20.5.10.15.20 | fclAsynCfgX3UserP10LineFolding | 1 | 1 | The value of this object indicates the line folding. The authorized values are '0..250'. The value '0' indicates no line folding.… |
1.3.6.1.4.1.866.20.1.20.5.10.15.21 | fclAsynCfgX3UserP11BinarySpeed | 1 | 1 | The value of this object is the binary speed in bits per second. |