The value of this object is the selection of
equipment operations on receipt of break signal
from the start-stop mode DTE. The authorized
values are 'forwardingChar' (no particular
operation), 'interrupt' (send to packet mode DTE
or other PAD an interrupt packet), 'reset'
(reset), 'interrupt-breakIndication' (send to
packet mode DTE or other PAD an interrupt packet
and an indication of break PAD message),
'escapeFromTransfer' (escape from data transfer
state), 'interrupt-breakIndication-discardOutput'
(send to packet mode DTE or other PAD an interrupt
packet and an indication of break PAD message, and
discard output to start-stop mode DTE). The
default value is 'reset'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object is the selection of
equipment operations on receipt of break signal
from the start-stop mode DTE. The authorized
values are 'forwardingChar' (no particular
operation), 'interrupt' (send to packet mode DTE
or other PAD an interrupt packet), 'reset'
(reset), 'interrupt-breakIndication' (send to
packet mode DTE or other PAD an interrupt packet
and an indication of break PAD message),
'escapeFromTransfer' (escape from data transfer
state), 'interrupt-breakIndication-discardOutput'
(send to packet mode DTE or other PAD an interrupt
packet and an indication of break PAD message, and
discard output to start-stop mode DTE). The
default value is 'reset'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclAsynCfgX3UserP07BreakHandling OBJECT-TYPE SYNTAX INTEGER { val0-forwardingChar(1), val1-interrupt(2), val2-reset(3), val4-breakIndication(5), val5-interrupt-breakIndication(6), val8-escapeFromTransfer(9), val21-interrupt-breakIndication-discardOutput(22) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the selection of equipment operations on receipt of break signal from the start-stop mode DTE. The authorized values are 'forwardingChar' (no particular operation), 'interrupt' (send to packet mode DTE or other PAD an interrupt packet), 'reset' (reset), 'interrupt-breakIndication' (send to packet mode DTE or other PAD an interrupt packet and an indication of break PAD message), 'escapeFromTransfer' (escape from data transfer state), 'interrupt-breakIndication-discardOutput' (send to packet mode DTE or other PAD an interrupt packet and an indication of break PAD message, and discard output to start-stop mode DTE). The default value is 'reset'." ::= { fclAsynCfgX3UserProfilePart1 17 }
fclAsynCfgX3UserP07BreakHandling OBJECT-TYPE SYNTAX INTEGER { val0-forwardingChar(1), val1-interrupt(2), val2-reset(3), val4-breakIndication(5), val5-interrupt-breakIndication(6), val8-escapeFromTransfer(9), val21-interrupt-breakIndication-discardOutput(22) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the selection of equipment operations on receipt of break signal from the start-stop mode DTE. The authorized values are 'forwardingChar' (no particular operation), 'interrupt' (send to packet mode DTE or other PAD an interrupt packet), 'reset' (reset), 'interrupt-breakIndication' (send to packet mode DTE or other PAD an interrupt packet and an indication of break PAD message), 'escapeFromTransfer' (escape from data transfer state), 'interrupt-breakIndication-discardOutput' (send to packet mode DTE or other PAD an interrupt packet and an indication of break PAD message, and discard output to start-stop mode DTE). The default value is 'reset'." ::= { fclAsynCfgX3UserProfilePart1 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.20.5.10.15.17.0 | fclAsynCfgX3UserP07BreakHandling | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.20.5.10.15.3 | fclAsynCfgX3UserProfileId | 1 | 1 | The value of this object is 80 the number of the user profile. This profile may be used, as any other X3 profile, to make a new a… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.4 | fclAsynCfgX3UserProfileDesc | 1 | 1 | The value of this object stores a text description of the user profile elaborated by the user. This description may contains from… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.11 | fclAsynCfgX3UserP01EscapeChar | 1 | 1 | The value of this object is the character to escape from the data transfer state and to recall the PAD. The authorized values are… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.12 | fclAsynCfgX3UserP02Echo | 1 | 1 | The value of this object indicates whether the echo is local not. The authorized values are 'off' (echoing by the terminal), 'on'… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.13 | fclAsynCfgX3UserP03ForwardingChar | 1 | 1 | The value of this object is the data forwarding character(s). The authorized values are 'none' (no character), 'CR' (Carriage Ret… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.14 | fclAsynCfgX3UserP04IdleTimerDelay | 1 | 1 | The value of this object is the idle timer delay in twentieths of a second. The authorized values are '0..250'. The value '0' wil… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.15 | fclAsynCfgX3UserP05OutputFlowCtrl | 1 | 1 | The value of this object indicates the flow control type from the equipment to the terminal. The authorized values are 'none' (no… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.16 | fclAsynCfgX3UserP06ServiceSignals | 1 | 1 | The value of this object is the control of service signals and command signals sent by the equipment. The authorized values are '… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.18 | fclAsynCfgX3UserP08OutputDiscard | 1 | 1 | The value of this object indicates whether data are sent to the terminal or not. The authorized values are 'off' (normal data del… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.19 | fclAsynCfgX3UserP09CrPadding | 1 | 1 | The value of this object indicates the padding after carriage return. The authorized values are '0..250'. A value between '0' and… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.20 | fclAsynCfgX3UserP10LineFolding | 1 | 1 | The value of this object indicates the line folding. The authorized values are '0..250'. The value '0' indicates no line folding.… |
| 1.3.6.1.4.1.866.20.1.20.5.10.15.21 | fclAsynCfgX3UserP11BinarySpeed | 1 | 1 | The value of this object is the binary speed in bits per second. |