The value of this object describes which operation
the equipment makes on the cause field of reset,
clear, and restart request and indication outgoing
packets. The authorized values are :
noModify : no operation,
setToZero : the cause field is set to 0
(meaning 'DTE originated').
The default value is 'noModify'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object describes which operation
the equipment makes on the cause field of reset,
clear, and restart request and indication outgoing
packets. The authorized values are :
noModify : no operation,
setToZero : the cause field is set to 0
(meaning 'DTE originated').
The default value is 'noModify'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclX25CfaSigOutPacketCauseField OBJECT-TYPE SYNTAX INTEGER { noModify(1), setToZero(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object describes which operation the equipment makes on the cause field of reset, clear, and restart request and indication outgoing packets. The authorized values are : noModify : no operation, setToZero : the cause field is set to 0 (meaning 'DTE originated'). The default value is 'noModify'." ::= { fclX25CfaSignallingEntry 20 }
fclX25CfaSigOutPacketCauseField OBJECT-TYPE SYNTAX INTEGER { noModify(1), setToZero(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object describes which operation the equipment makes on the cause field of reset, clear, and restart request and indication outgoing packets. The authorized values are : noModify : no operation, setToZero : the cause field is set to 0 (meaning 'DTE originated'). The default value is 'noModify'." ::= { fclX25CfaSignallingEntry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.50.1.30.1.1 | fclX25CfaSigConfigId | 0 | 0 | The value of this object identifies one and only one X25 access configuration. The possible values are : '0..199. If it is unused… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.2 | fclX25CfaSigType | 0 | 0 | The value of this object defines the signalling processing behaviour over the connected line. The authorized values are 'x25Netwo… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.3 | fclX25CfaSigPacketAddressCount | 0 | 0 | The value of this object is the number of addresses in call request packets sent or received. The authorized values are '1..2'. T… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.4 | fclX25CfaSigSubAddressTransmission | 0 | 0 | The value of this object indicates whether the sub-address of the called address field of the call request packet received on a P… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.5 | fclX25CfaSigPdnIndicator | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to a PDNL (Public Data Network Link). The authoriz… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.10 | fclX25CfaSigConversionAimedPoint | 0 | 0 | The value of this object indicates whether the 'aimed point' address conversion is enabled or not. This conversion consists in ma… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.11 | fclX25CfaSigConversionIncomingCall | 0 | 0 | The value of this object indicates which address field are converted on an incoming call. The authorized values are : off : no add… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.12 | fclX25CfaSigConversionOutgoingCall | 0 | 0 | The value of this object indicates which address field are converted on an outgoing call. The authorized values are : off : no add… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.13 | fclX25CfaSigConversionAddressCheck | 0 | 0 | The value of this object indicates the behaviour of the equipment when a requested address conversion can not be made because the… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.14 | fclX25CfaSigConvMultiCalledAddrInCall | 0 | 0 | Numero d'identification pour conversion d'adresse d'appele multi-criteres en entree |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.15 | fclX25CfaSigConvMultiCallingAddrInCall | 0 | 0 | Numero d'identification pour conversion d'adresse d'appelant multi-criteres en entree |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.16 | fclX25CfaSigConvMultiCalledAddrOutCall | 0 | 0 | Numero d'identification pour conversion d'adresse d'appele multi-criteres en sortie |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.17 | fclX25CfaSigConvMultiCallingAddrOutCall | 0 | 0 | Numero d'identification pour conversion d'adresse d'appelant multi-criteres en sortie |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.21 | fclX25CfaSigInPacketCauseField | 0 | 0 | The value of this object describes which operation the equipment makes on the cause field of reset, clear, and restart request an… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.22 | fclX25CfaSigT11CallResponseTimer | 0 | 0 | The value of this object is the maximum time (in seconds) the equipment will wait for a response to a call request packet sent on… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.25 | fclX25CfaSigCallAcceptedFormat | 0 | 0 | The value of this object defines the format of an outgoing call connected packet. The authorized values are : noFacilitiesNoAddres… |
1.3.6.1.4.1.866.20.1.20.50.1.30.1.26 | fclX25CfaSigClearFormat | 0 | 0 | The value of this object defines the format of an outgoing call connected packet. The authorized values are : noFacilitiesNoAddres… |