This supresses all VLAN database violations and
the traps caused by these events.
Parsed from file TNI-MIB.mib
Module: TNI-MIB
Vendor: Transition Engineering Inc.
Module: TNI-MIB
[Automatically extracted from oidview.com]
sfbrm100SwSupressVlanViolations OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2)} ACCESS read-write STATUS mandatory DESCRIPTION "This supresses all VLAN database violations and the traps caused by these events." ::= { sfbrm100SwEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.3.1.2.1.1.1 | sfbrm100SwPortIndex | 0 | 0 | The Local Port Index of the local port to which the peer is connected. The local device has the port index of 0. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.2 | sfbrm100SwSecIndex | 0 | 0 | Secondary index for the table. It is always 1. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.3 | sfbrm100SwATUAgeTimeout | 0 | 0 | The ATU ageing time in seconds. This indicates the time that each ATU entry remains valid in the database before being purged. T… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.4 | sfbrm100SwIngressMonPort | 0 | 0 | The Ingress monitor port. Frames that are targeted towards an Ingress monitor port go out this port. Not-applicable for a 2-Port … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.5 | sfbrm100SwEgressMonPort | 0 | 0 | The egress monitor port. Frames that are targeted towards an Egress monitor port go out this port. Not-applicable for a 2-Port de… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.6 | sfbrm100SwFactoryDefaults | 0 | 0 | Reset the switch to factory default settings. A read always returns a notApplicable(2) value. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.7 | sfbrm100SwResetCounters | 0 | 0 | Resets all port counters. A read always returns a notApplicable(2) value. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.8 | sfbrm100SwHistMode | 0 | 0 | The port histogram counters can be set to : cntRx (1) - count Rx frames only. cntTx (2) - count Tx frames only cntRxTx (3) … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.9 | sfbrm100SwIEEEPriRemap0 | 0 | 0 | All Frames with priority 0 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.10 | sfbrm100SwIEEEPriRemap1 | 0 | 0 | All Frames with priority 1 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.11 | sfbrm100SwIEEEPriRemap2 | 0 | 0 | All Frames with priority 2 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.12 | sfbrm100SwIEEEPriRemap3 | 0 | 0 | All Frames with priority 3 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.13 | sfbrm100SwIEEEPriRemap4 | 0 | 0 | All Frames with priority 4 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.14 | sfbrm100SwIEEEPriRemap5 | 0 | 0 | All Frames with priority 5 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.15 | sfbrm100SwIEEEPriRemap6 | 0 | 0 | All Frames with priority 6 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.16 | sfbrm100SwIEEEPriRemap7 | 0 | 0 | All Frames with priority 7 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.17 | sfbrm100SwFlushFdb | 0 | 0 | Flushes all static entries in the forwarding database. When set to flushAll(1), all the entries in the database are purged. when … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.18 | sfbrm100SwFlushVlandb | 0 | 0 | Flushes all VLAN entries in the database. When set to flushAll(1), all VLAN entries in the database are purged, and VLAN is disa… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.19 | sfbrm100SwUseDoubleTagData | 0 | 0 | When Double tagging is enabled on any of the ports, this mib variable decides if the tag that is removed from Ingress frames shou… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.20 | sfbrm100SwFiberRedundancy | 0 | 0 | This feature is applicable in the xFBRM/xBFFG series which have 2 fiber ports. When set to enabled, the primary and backup fiber p… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.21 | sfbrm100SwFiberRedundRevert | 0 | 0 | This mib variable is applicable only if 'sfbrm100SwFiberRedundancy' is enabled. When there is a failure in the primary and second… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.22 | sfbrm100SwFbrRedundActivePort | 0 | 0 | This mib variable is applicable only if 'sfbrm100SwFiberRedundancy' is enabled. This indicates the current active port that is ope… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.24 | sfbrm100SwSupressMACViolations | 0 | 0 | This supresses all MAC database violations and the traps caused by these events. |