The ATU ageing time in seconds. This indicates the time that each
ATU entry remains valid in the database before being purged. The minimum
aging time is 15 seconds and maximum is 64 minutes. A ageing time time of zero
disables ageing. i.e All addresses remain in the database, they are never purged.
The aging time should be in 15 sec increments.
Parsed from file TNI-MIB.mib
Module: TNI-MIB
Vendor: Transition Engineering Inc.
Module: TNI-MIB
[Automatically extracted from oidview.com]
sfbrm100SwATUAgeTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ATU ageing time in seconds. This indicates the time that each ATU entry remains valid in the database before being purged. The minimum aging time is 15 seconds and maximum is 64 minutes. A ageing time time of zero disables ageing. i.e All addresses remain in the database, they are never purged. The aging time should be in 15 sec increments." ::= { sfbrm100SwEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.3.1.2.1.1.1 | sfbrm100SwPortIndex | 0 | 0 | The Local Port Index of the local port to which the peer is connected. The local device has the port index of 0. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.2 | sfbrm100SwSecIndex | 0 | 0 | Secondary index for the table. It is always 1. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.4 | sfbrm100SwIngressMonPort | 0 | 0 | The Ingress monitor port. Frames that are targeted towards an Ingress monitor port go out this port. Not-applicable for a 2-Port … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.5 | sfbrm100SwEgressMonPort | 0 | 0 | The egress monitor port. Frames that are targeted towards an Egress monitor port go out this port. Not-applicable for a 2-Port de… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.6 | sfbrm100SwFactoryDefaults | 0 | 0 | Reset the switch to factory default settings. A read always returns a notApplicable(2) value. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.7 | sfbrm100SwResetCounters | 0 | 0 | Resets all port counters. A read always returns a notApplicable(2) value. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.8 | sfbrm100SwHistMode | 0 | 0 | The port histogram counters can be set to : cntRx (1) - count Rx frames only. cntTx (2) - count Tx frames only cntRxTx (3) … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.9 | sfbrm100SwIEEEPriRemap0 | 0 | 0 | All Frames with priority 0 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.10 | sfbrm100SwIEEEPriRemap1 | 0 | 0 | All Frames with priority 1 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.11 | sfbrm100SwIEEEPriRemap2 | 0 | 0 | All Frames with priority 2 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.12 | sfbrm100SwIEEEPriRemap3 | 0 | 0 | All Frames with priority 3 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.13 | sfbrm100SwIEEEPriRemap4 | 0 | 0 | All Frames with priority 4 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.14 | sfbrm100SwIEEEPriRemap5 | 0 | 0 | All Frames with priority 5 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.15 | sfbrm100SwIEEEPriRemap6 | 0 | 0 | All Frames with priority 6 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.16 | sfbrm100SwIEEEPriRemap7 | 0 | 0 | All Frames with priority 7 are remapped to this set value inside the switch. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.17 | sfbrm100SwFlushFdb | 0 | 0 | Flushes all static entries in the forwarding database. When set to flushAll(1), all the entries in the database are purged. when … |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.18 | sfbrm100SwFlushVlandb | 0 | 0 | Flushes all VLAN entries in the database. When set to flushAll(1), all VLAN entries in the database are purged, and VLAN is disa… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.19 | sfbrm100SwUseDoubleTagData | 0 | 0 | When Double tagging is enabled on any of the ports, this mib variable decides if the tag that is removed from Ingress frames shou… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.20 | sfbrm100SwFiberRedundancy | 0 | 0 | This feature is applicable in the xFBRM/xBFFG series which have 2 fiber ports. When set to enabled, the primary and backup fiber p… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.21 | sfbrm100SwFiberRedundRevert | 0 | 0 | This mib variable is applicable only if 'sfbrm100SwFiberRedundancy' is enabled. When there is a failure in the primary and second… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.22 | sfbrm100SwFbrRedundActivePort | 0 | 0 | This mib variable is applicable only if 'sfbrm100SwFiberRedundancy' is enabled. This indicates the current active port that is ope… |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.23 | sfbrm100SwSupressVlanViolations | 0 | 0 | This supresses all VLAN database violations and the traps caused by these events. |
| 1.3.6.1.4.1.868.2.3.1.2.1.1.24 | sfbrm100SwSupressMACViolations | 0 | 0 | This supresses all MAC database violations and the traps caused by these events. |