User-defined keywords that group this device together with
other devices under a user-defined scheme. By placing
matching keywords in cpsGroupCtrl.0, the agent can be
instructed to apply configuration changes simultaneously
to all group members rather than to individual devices.
Every Groups string has three automatically defined
implied values:
1) The model family of the device, e.g. 'CETCT100'
2) The serial number of the cabinet in which the device
is installed, in decimal with no leading zeroes,
e.g. '12345', and
3) same as 2, with the slot in which the device is
installed appended, enclosed in square brackets.
e.g. '12345[9]'
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cetct100Groups OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keywords in cpsGroupCtrl.0, the agent can be instructed to apply configuration changes simultaneously to all group members rather than to individual devices. Every Groups string has three automatically defined implied values: 1) The model family of the device, e.g. 'CETCT100' 2) The serial number of the cabinet in which the device is installed, in decimal with no leading zeroes, e.g. '12345', and 3) same as 2, with the slot in which the device is installed appended, enclosed in square brackets. e.g. '12345[9]'" ::= { cetct100Entry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.1 | cetct100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.2 | cetct100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.4 | cetct100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.5 | cetct100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.6 | cetct100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.7 | cetct100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.8 | cetct100FirmwareRevision | 0 | 0 | The firmware revision level for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.9 | cetct100TPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.10 | cetct100Collision | 0 | 0 | This status variable indicates whether or not an Ethernet collision occurred during the most recent polling cycle. |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.11 | cetct100CoaxActivity | 0 | 0 | This status variable indicates whether or not Ethernet traffic was detected on the Coax interface during the most recent polling … |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.12 | cetct100TPActivity | 0 | 0 | This status variable indicates whether or not Ethernet traffic was detected on the Twisted Pair interface during the most recent … |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.13 | cetct100CollisionsPerMinute | 0 | 0 | The number of Ethernet collisions that occurred during the most recently completed measured minute. Every 60 seconds, the device … |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.14 | cetct100CollisionsPerHour | 0 | 0 | The number of Ethernet collisions that occurred during the most recently completed measured hour. Every 60 minutes, the device mo… |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.15 | cetct100ConnA | 0 | 0 | The style of media connector built into this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.16 | cetct100ConnB | 0 | 0 | The style of media connector built into this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.12.1.17 | cetct100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |