Status and configuration entries for a single SMACF100P
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
smacf100PEntry OBJECT-TYPE SYNTAX Smacf100PEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single SMACF100P" INDEX { smacf100PSubDeviceIndex, smacf100PBiaIndex, smacf100PSlotIndex } ::= { smacf100PTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.1 | smacf100PSubDeviceIndex | 0 | 0 | Generally, individual devices in this MIB are distinguished by BiaIndex and SlotIndex. This device differs from many in that it c… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.2 | smacf100PBiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.3 | smacf100PSlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.4 | smacf100PGroups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.5 | smacf100PCfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.6 | smacf100PConnA | 0 | 0 | The style of Fiber or Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.7 | smacf100PLink | 0 | 0 | Status of Port Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.8 | smacf100P100Mbps | 0 | 0 | Communication speed for this port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.9 | smacf100PFullDuplex | 0 | 0 | In most cases this is a configuration setting that controls the duplex mode; fullDuplex is full duplex and halfDuplex is half dup… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.10 | smacf100PSACStat | 0 | 0 | This status value indicates whether or not the source MAC address attached to this port changed in the last polling period. This … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.11 | smacf100PEnabled | 0 | 0 | Status of of this Port. A value of yes(1) indicates this port is 'enabled'. A value of no(2) indicates this port is 'disabled'. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.12 | smacf100PAutoNegot | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.13 | smacf100PAdv10HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, half duplex. This sett… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.14 | smacf100PAdv10FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, full duplex. This sett… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.15 | smacf100PAdv100HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, half duplex. This set… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.16 | smacf100PAdv100FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, full duplex. This set… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.17 | smacf100PSTPState | 0 | 0 | Port spanning tree state. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.18 | smacf100PLastMAC | 0 | 0 | Last MAC Address this port communicated with. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.19 | smacf100PFarEndFaultCfg | 0 | 0 | Far end fault configuration of this Port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.20 | smacf100PFarEndFaultStat | 0 | 0 | Far end fault status of this port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.21 | smacf100PTxOctets | 0 | 0 | The number of bytes of data transmitted through this interface. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.22 | smacf100PWrapTxOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PTxOctets(21) MIB variable has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.23 | smacf100PRxOctets | 0 | 0 | The number of bytes of data received through this interface. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.24 | smacf100PWrapRxOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PRxOctets(23) MIB variable has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.25 | smacf100PSACCfg | 0 | 0 | Source Address Change detection configuration. Enables or Disables the generation of traps related to source address change for t… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.26 | smacf100PBlockMgmt | 0 | 0 | Through this variable and others, the SMACF100 supports port- based VLANs. The SMACF100 will pass tags for IEEE 802.3ac VLANs, bu… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.27 | smacf100PBlockPort | 0 | 0 | Through this variable and others, the SMACF100 supports port- based VLANs. The SMACF100 will pass tags for IEEE 802.3ac VLANs, bu… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.28 | smacf100PTxDropPkts | 0 | 0 | This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g. transmit FIFO underflow), or a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.29 | smacf100PTxBroadcastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a broadcast address. This counter includes neither error… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.30 | smacf100PTxMulticastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a multicast address. This counter includes neither error… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.31 | smacf100PTxUnicastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a unicast address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.32 | smacf100PTxCollisions | 0 | 0 | The number of collisions experienced by this port during packet transmissions. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.33 | smacf100PTxSingleCollision | 0 | 0 | The number of packets successfully transmitted by this port that experienced exactly one collision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.34 | smacf100PTxMultipleCollision | 0 | 0 | The number of packets successfully transmitted by this port that experienced more than one collision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.35 | smacf100PTxDeferredTransmit | 0 | 0 | The number of packets transmitted by a this port for which the first transmission attempt was delayed because the medium was busy. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.36 | smacf100PTxLateCollision | 0 | 0 | The number of times that a collision was detected later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.37 | smacf100PTxExcessiveCollision | 0 | 0 | The number of packets that were not transmitted from this port because 16 unsucessful attempts were made to transmit the packet. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.38 | smacf100PTxFrameInDisc | 0 | 0 | The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. This … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.39 | smacf100PTxPausePkts | 0 | 0 | The number of PAUSE frames transmitted by this port. This implies that the port is in full duplex mode and that 802.3x flow contr… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.40 | smacf100PRxUndersizePkts | 0 | 0 | The number of good packets received by this port that are less than 64 bytes long (excluding framing bits but including the Frame… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.41 | smacf100PRxPausePkts | 0 | 0 | The number of PAUSE frames recieved by this port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88- 08h), … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.42 | smacf100PPkts64Octets | 0 | 0 | The number of packets, including error packets, that are 64 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.43 | smacf100PPkts65to127Octets | 0 | 0 | The number of packets, including error packets, that are between 65 and 127 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.44 | smacf100PPkts128to255Octets | 0 | 0 | The number of packets, including error packets, that are between 128 and 255 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.45 | smacf100PPkts256to511Octets | 0 | 0 | The number of packets, including error packets, that are between 256 and 511 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.46 | smacf100PPkts512to1023Octets | 0 | 0 | The number of packets, including error packets, that are between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.47 | smacf100PPkts1024to1522Octets | 0 | 0 | The number of packets, including error packets, that are between 1024 and 1522 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.48 | smacf100PRxOversizePkts | 0 | 0 | The number of good packets received by this port that are longer than 1522 bytes inclusive (excluding framing bits but including … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.49 | smacf100PRxJabbers | 0 | 0 | The number of packets received by a port that are longer than 1522 bytes and have either a Frame Check Sequence error or an align… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.50 | smacf100PRxAlignmentErrors | 0 | 0 | The number of packets received by this port that have a length (excluding framing bits but including the Frame Check Sequence) be… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.51 | smacf100PRxFCSErrors | 0 | 0 | The number of packets received by this port that have a length (excluding framing bits but including the Frame Check Sequence) be… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.52 | smacf100PRxGoodOctets | 0 | 0 | The total number of bytes in all good packets received by a port (excluding framing bits but including Frame Check Sequences). |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.53 | smacf100PWrapRxGoodOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PRxGoodOctets(52) MIB variable for this port has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.54 | smacf100PRxDropPkts | 0 | 0 | The number of good packets received by this port that were dropped due to lack of resources (e.g. lack of input buffers) or were … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.55 | smacf100PRxUnicastPkts | 0 | 0 | The number of good packets received by this port that are addressed to a unicast address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.56 | smacf100PRxMulticastPkts | 0 | 0 | The number of good packets received by this port that are directed to a multicast address. This counter includes neither errored … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.57 | smacf100PRxBroadcastPkts | 0 | 0 | The number of good packets received by this port that are directed to the broadcast address. This counter includes neither errore… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.58 | smacf100PRxSAChanges | 0 | 0 | The number of times the Source Ethernet Address of good receive packets has changed from the previous value. A count greater than… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.59 | smacf100PRxFragments | 0 | 0 | The number of packets received by a port that are shorter than 64 bytes (excluding framing bits) and have either an Frame Check S… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.60 | smacf100PRxExcessSizeDisc | 0 | 0 | The number of good packets received by this port that are longer than 1536 bytes (excluding framing bits but including Frame Chec… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.61 | smacf100PRxSymbolError | 0 | 0 | The total number of times this port received a packet which had a valid length, but contained at least one invalid symbol. The co… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.62 | smacf100PQosPriority | 0 | 0 | When this variable is set to 'high(1)', this port becomes a high-priority port. This means that all packets received on this port… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.63 | smacf100PQosPause | 0 | 0 | When the global variable smacf100QosEnable(7) is set to 'enabled(1)', then the port-specific variable smacf100PQosPause(63) contr… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.64 | smacf100PAdvPause | 0 | 0 | Enable/disable control for this advertised autonegotiation mode. When Pause capability is autonegotiated (at the Physical level),… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.65 | smacf100PCacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |