Through this variable and others, the SMACF100 supports
port- based VLANs. The SMACF100 will pass tags for IEEE
802.3ac VLANs, but will neither insert nor strip them.
When this variable is set to block(1), this port may
neither transmit packets to nor receive packets from
management entities within this switch, i.e. the
reporting unit (present in every SMACF100) and the
management module (present in SMACF100 Main Management
Units). This feature is intended to block traffic
between particular Ethernet interfaces inside a single
switch; it cannot identify or block management traffic
from external sources. A single port is selected for
configuration via the slot index. The subdevice index
for this variable must always be 1. The logical
soundness of VLAN rules cannot be validated. If you
set smacf100PBlockMgmt(26) to block(1) on a port that
provides a path between a reporting unit and its
management module, or between a management module and
its Network Management Station, you will be unable to
manage the SMACF100 until the situation is rectified
(by recabling to work around the misconfiguration, or
by resetting the SMACF100 to factory defaults via the
serial port).
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
smacf100PBlockMgmt OBJECT-TYPE SYNTAX INTEGER { block(1), pass(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Through this variable and others, the SMACF100 supports port- based VLANs. The SMACF100 will pass tags for IEEE 802.3ac VLANs, but will neither insert nor strip them. When this variable is set to block(1), this port may neither transmit packets to nor receive packets from management entities within this switch, i.e. the reporting unit (present in every SMACF100) and the management module (present in SMACF100 Main Management Units). This feature is intended to block traffic between particular Ethernet interfaces inside a single switch; it cannot identify or block management traffic from external sources. A single port is selected for configuration via the slot index. The subdevice index for this variable must always be 1. The logical soundness of VLAN rules cannot be validated. If you set smacf100PBlockMgmt(26) to block(1) on a port that provides a path between a reporting unit and its management module, or between a management module and its Network Management Station, you will be unable to manage the SMACF100 until the situation is rectified (by recabling to work around the misconfiguration, or by resetting the SMACF100 to factory defaults via the serial port)." ::= { smacf100PEntry 26 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.1 | smacf100PSubDeviceIndex | 0 | 0 | Generally, individual devices in this MIB are distinguished by BiaIndex and SlotIndex. This device differs from many in that it c… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.2 | smacf100PBiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.3 | smacf100PSlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.4 | smacf100PGroups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.5 | smacf100PCfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.6 | smacf100PConnA | 0 | 0 | The style of Fiber or Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.7 | smacf100PLink | 0 | 0 | Status of Port Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.8 | smacf100P100Mbps | 0 | 0 | Communication speed for this port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.9 | smacf100PFullDuplex | 0 | 0 | In most cases this is a configuration setting that controls the duplex mode; fullDuplex is full duplex and halfDuplex is half dup… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.10 | smacf100PSACStat | 0 | 0 | This status value indicates whether or not the source MAC address attached to this port changed in the last polling period. This … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.11 | smacf100PEnabled | 0 | 0 | Status of of this Port. A value of yes(1) indicates this port is 'enabled'. A value of no(2) indicates this port is 'disabled'. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.12 | smacf100PAutoNegot | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.13 | smacf100PAdv10HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, half duplex. This sett… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.14 | smacf100PAdv10FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 10Mbps, full duplex. This sett… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.15 | smacf100PAdv100HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, half duplex. This set… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.16 | smacf100PAdv100FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 100Mbps, full duplex. This set… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.17 | smacf100PSTPState | 0 | 0 | Port spanning tree state. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.18 | smacf100PLastMAC | 0 | 0 | Last MAC Address this port communicated with. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.19 | smacf100PFarEndFaultCfg | 0 | 0 | Far end fault configuration of this Port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.20 | smacf100PFarEndFaultStat | 0 | 0 | Far end fault status of this port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.21 | smacf100PTxOctets | 0 | 0 | The number of bytes of data transmitted through this interface. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.22 | smacf100PWrapTxOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PTxOctets(21) MIB variable has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.23 | smacf100PRxOctets | 0 | 0 | The number of bytes of data received through this interface. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.24 | smacf100PWrapRxOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PRxOctets(23) MIB variable has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.25 | smacf100PSACCfg | 0 | 0 | Source Address Change detection configuration. Enables or Disables the generation of traps related to source address change for t… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.27 | smacf100PBlockPort | 0 | 0 | Through this variable and others, the SMACF100 supports port- based VLANs. The SMACF100 will pass tags for IEEE 802.3ac VLANs, bu… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.28 | smacf100PTxDropPkts | 0 | 0 | This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g. transmit FIFO underflow), or a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.29 | smacf100PTxBroadcastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a broadcast address. This counter includes neither error… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.30 | smacf100PTxMulticastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a multicast address. This counter includes neither error… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.31 | smacf100PTxUnicastPkts | 0 | 0 | The number of good packets transmitted by this port that are directed to a unicast address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.32 | smacf100PTxCollisions | 0 | 0 | The number of collisions experienced by this port during packet transmissions. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.33 | smacf100PTxSingleCollision | 0 | 0 | The number of packets successfully transmitted by this port that experienced exactly one collision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.34 | smacf100PTxMultipleCollision | 0 | 0 | The number of packets successfully transmitted by this port that experienced more than one collision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.35 | smacf100PTxDeferredTransmit | 0 | 0 | The number of packets transmitted by a this port for which the first transmission attempt was delayed because the medium was busy. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.36 | smacf100PTxLateCollision | 0 | 0 | The number of times that a collision was detected later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.37 | smacf100PTxExcessiveCollision | 0 | 0 | The number of packets that were not transmitted from this port because 16 unsucessful attempts were made to transmit the packet. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.38 | smacf100PTxFrameInDisc | 0 | 0 | The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. This … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.39 | smacf100PTxPausePkts | 0 | 0 | The number of PAUSE frames transmitted by this port. This implies that the port is in full duplex mode and that 802.3x flow contr… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.40 | smacf100PRxUndersizePkts | 0 | 0 | The number of good packets received by this port that are less than 64 bytes long (excluding framing bits but including the Frame… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.41 | smacf100PRxPausePkts | 0 | 0 | The number of PAUSE frames recieved by this port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88- 08h), … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.42 | smacf100PPkts64Octets | 0 | 0 | The number of packets, including error packets, that are 64 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.43 | smacf100PPkts65to127Octets | 0 | 0 | The number of packets, including error packets, that are between 65 and 127 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.44 | smacf100PPkts128to255Octets | 0 | 0 | The number of packets, including error packets, that are between 128 and 255 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.45 | smacf100PPkts256to511Octets | 0 | 0 | The number of packets, including error packets, that are between 256 and 511 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.46 | smacf100PPkts512to1023Octets | 0 | 0 | The number of packets, including error packets, that are between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.47 | smacf100PPkts1024to1522Octets | 0 | 0 | The number of packets, including error packets, that are between 1024 and 1522 bytes long. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.48 | smacf100PRxOversizePkts | 0 | 0 | The number of good packets received by this port that are longer than 1522 bytes inclusive (excluding framing bits but including … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.49 | smacf100PRxJabbers | 0 | 0 | The number of packets received by a port that are longer than 1522 bytes and have either a Frame Check Sequence error or an align… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.50 | smacf100PRxAlignmentErrors | 0 | 0 | The number of packets received by this port that have a length (excluding framing bits but including the Frame Check Sequence) be… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.51 | smacf100PRxFCSErrors | 0 | 0 | The number of packets received by this port that have a length (excluding framing bits but including the Frame Check Sequence) be… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.52 | smacf100PRxGoodOctets | 0 | 0 | The total number of bytes in all good packets received by a port (excluding framing bits but including Frame Check Sequences). |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.53 | smacf100PWrapRxGoodOctets | 0 | 0 | The number of times that the unsigned 32-bit smacf100PRxGoodOctets(52) MIB variable for this port has wrapped. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.54 | smacf100PRxDropPkts | 0 | 0 | The number of good packets received by this port that were dropped due to lack of resources (e.g. lack of input buffers) or were … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.55 | smacf100PRxUnicastPkts | 0 | 0 | The number of good packets received by this port that are addressed to a unicast address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.56 | smacf100PRxMulticastPkts | 0 | 0 | The number of good packets received by this port that are directed to a multicast address. This counter includes neither errored … |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.57 | smacf100PRxBroadcastPkts | 0 | 0 | The number of good packets received by this port that are directed to the broadcast address. This counter includes neither errore… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.58 | smacf100PRxSAChanges | 0 | 0 | The number of times the Source Ethernet Address of good receive packets has changed from the previous value. A count greater than… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.59 | smacf100PRxFragments | 0 | 0 | The number of packets received by a port that are shorter than 64 bytes (excluding framing bits) and have either an Frame Check S… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.60 | smacf100PRxExcessSizeDisc | 0 | 0 | The number of good packets received by this port that are longer than 1536 bytes (excluding framing bits but including Frame Chec… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.61 | smacf100PRxSymbolError | 0 | 0 | The total number of times this port received a packet which had a valid length, but contained at least one invalid symbol. The co… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.62 | smacf100PQosPriority | 0 | 0 | When this variable is set to 'high(1)', this port becomes a high-priority port. This means that all packets received on this port… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.63 | smacf100PQosPause | 0 | 0 | When the global variable smacf100QosEnable(7) is set to 'enabled(1)', then the port-specific variable smacf100PQosPause(63) contr… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.64 | smacf100PAdvPause | 0 | 0 | Enable/disable control for this advertised autonegotiation mode. When Pause capability is autonegotiated (at the Physical level),… |
| 1.3.6.1.4.1.868.2.4.1.2.2.15.1.65 | smacf100PCacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |