Status and configuration entries for a single CPSVT100
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsvt100Entry OBJECT-TYPE SYNTAX Cpsvt100Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single CPSVT100" INDEX { cpsvt100BiaIndex, cpsvt100SlotIndex } ::= { cpsvt100Table 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.1 | cpsvt100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.2 | cpsvt100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.3 | cpsvt100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.4 | cpsvt100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.5 | cpsvt100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.6 | cpsvt100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.7 | cpsvt100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.8 | cpsvt100CopperLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.9 | cpsvt100Fault | 0 | 0 | Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.10 | cpsvt100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.11 | cpsvt100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.12 | cpsvt100TermTiming | 0 | 0 | Local Terminal Timing setting. Terminal timing is a signal sent from a DCE to a DTE to control the rate of data the DTE sends to… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.13 | cpsvt100LoopBack | 0 | 0 | Remote fiber and copper loopback setting. Loopback is a testing aid available on several different products. When Loopback is en… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.14 | cpsvt100CableMode | 0 | 0 | A description of the type of cable that is attached to the Copper interface of the local device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.15 | cpsvt100DCE | 0 | 0 | An indication of whether this device is attached to a DCE (a computer) or a DTE (a terminal). Like cpsvt100CableMode(14), this st… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.16 | cpsvt100InvertTX | 0 | 0 | Local transmit clock usage. Some types of high-speed serial equipment read the data signal on the rising edge of the clock, and … |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.17 | cpsvt100InvertRX | 0 | 0 | Local receive clock usage. Some types of high-speed serial equipment read the data signal on the rising edge of the clock, and o… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.18 | cpsvt100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.19 | cpsvt100FirmwareRev | 0 | 0 | Local firmware revision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.20 | cpsvt100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media converter. |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.21 | cpsvt100RmtTermTiming | 0 | 0 | Local Terminal Timing setting of the remotely managed CPSVTxxx. Terminal timing is a signal sent from a DCE to a DTE to control … |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.22 | cpsvt100RmtLoopBack | 0 | 0 | Remote fiber and copper loopback setting. Loopback is a testing aid available on several different products. When Loopback is en… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.23 | cpsvt100RmtCableMode | 0 | 0 | A description of the type of cable that is attached to the Copper interface of the local device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.24 | cpsvt100RmtDCE | 0 | 0 | An indication of whether this device is attached to a DCE (a computer) or a DTE (a terminal). Like cpsvt100CableMode(14), this st… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.25 | cpsvt100RmtInvertTX | 0 | 0 | Local transmit clock usage. Some types of high-speed serial equipment read the data signal on the rising edge of the clock, and … |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.26 | cpsvt100RmtInvertRX | 0 | 0 | Local receive clock usage. Some types of high-speed serial equipment read the data signal on the rising edge of the clock, and o… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.27 | cpsvt100RmtConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.28 | cpsvt100RmtFirmwareRev | 0 | 0 | Local firmware revision. |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.29 | cpsvt100RmtCopperLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.30 | cpsvt100RmtFiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.18.1.31 | cpsvt100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |