The Fiber Link status for this device.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgfeb100FiberLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Fiber Link status for this device." ::= { cgfeb100Entry 43 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.23.1.1 | cgfeb100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.2 | cgfeb100SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.3 | cgfeb100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.4 | cgfeb100MRevision | 0 | 0 | The marketing revision of this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.5 | cgfeb100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.6 | cgfeb100SerialNumber | 0 | 0 | The serial number of this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.7 | cgfeb100ConfigMode | 0 | 0 | This device may have a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP man… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.8 | cgfeb100FirmwareRevision | 0 | 0 | The firmware revision level for this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.9 | cgfeb100SelfTestFailed | 0 | 0 | cgfeb100SelftestFailed |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.10 | cgfeb100MonitorType | 0 | 0 | Some versions of this device support the monitoring of network traffic passing through the converter's fiber interface via a dedi… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.11 | cgfeb100LinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.12 | cgfeb100QosEnabled | 0 | 0 | This variable allows Quality of Service functions to be enabled or disabled. This includes the processing of 802.1p tags (See cg… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.13 | cgfeb100QosHPThreshold | 0 | 0 | When an incoming 802.1p priority tag value is greater than or equal to this value (from 0 to 7), the incoming packet will be clas… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.14 | cgfeb100QosLqWeight | 0 | 0 | A value between 1 and 15 indicating the number of packets that should be processed from the low-priority queue before attention i… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.15 | cgfeb100QosHqWeight | 0 | 0 | A value between 1 and 15 indicating the number of packets that should be processed from the high-priority queue before attention … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.16 | cgfeb100ConnA | 0 | 0 | The style of copper connector built into this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.17 | cgfeb100TPLink | 0 | 0 | Twisted Pair link status. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.18 | cgfeb100TPSpeedCfg | 0 | 0 | The desired speed of the Twisted Pair interface. This speed can be set to 10Mbps(1) or 100Mbps(2). Operation at 1000Mbps requires… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.19 | cgfeb100TPSpeedStat | 0 | 0 | The actual speed of the Twisted Pair interface: 10Mbps(1), 100Mbps(2), or 1000Mbps(3). If cgfeb100TpAutonegot(24) has the value e… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.20 | cgfeb100TPFullDuplexCfg | 0 | 0 | The desired duplex setting of the Twisted Pair interface. This can be set to fdx(1) (full duplex) or hdx(2) (half duplex). When c… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.21 | cgfeb100TPFullDuplexStat | 0 | 0 | The actual duplex behavior of the Twisted Pair interface. If cgfeb100TpAutonegot(24) has the value enabled(1) and cgfeb100TpLink(… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.22 | cgfeb100TPCrossCfg | 0 | 0 | The desired TX/RX Pair orientation of the Twisted Pair interface. This can be set to mdi(1) (straight through), mdix(2) (crossed … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.23 | cgfeb100TPCrossStat | 0 | 0 | The actual TX/RX Pair orientation of the Twisted Pair interface, usually mdi(1) (straight through) or mdix(2) (crossed over). Whe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.24 | cgfeb100TPAutoNegot | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.25 | cgfeb100TPAdv10HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.26 | cgfeb100TPAdv10FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.27 | cgfeb100TPAdv100HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.28 | cgfeb100TPAdv100FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.29 | cgfeb100TPAdv1000HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.30 | cgfeb100TPAdv1000FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.31 | cgfeb100TPLpAdvPause | 0 | 0 | This read-only variable shows the pause capability advertised by the twisted pair port's link partner. Values 1 through 4 for thi… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.32 | cgfeb100TPLpAdv10HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 10Mbps Half Duplex. If the device does… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.33 | cgfeb100TPLpAdv10FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 10Mbps Full Duplex. If the device does… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.34 | cgfeb100TPLpAdv100HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 100Mbps Half Duplex. If the device doe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.35 | cgfeb100TPLpAdv100FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 100Mbps Full Duplex. If the device doe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.36 | cgfeb100TPLpAdv1000HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 1000Mbps Half Duplex. If the device do… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.37 | cgfeb100TPLpAdv1000FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 1000Mbps Full Duplex. If the device do… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.38 | cgfeb100TPAdvPause | 0 | 0 | Enable/disable control for autonegotiation advertising of Twisted Pair Pause capability. Selectable values are symmetric(1), asy… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.39 | cgfeb100TPQosPause | 0 | 0 | This variable allows Twisted Pair Quality Of Service Pause to be enabled or disabled. When cgfeb100QosEnabled(12) is set to enabl… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.40 | cgfeb100TPSacCfg | 0 | 0 | This variable allows Source Address Change traps to be enabled or disabled. If enabled, 'Error' traps will be sent as frequently … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.41 | cgfeb100TPSacStat | 0 | 0 | This read-only variable has the value changed(1) if the Ethernet source address received on the Twisted Pair interface changed si… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.42 | cgfeb100ConnB | 0 | 0 | The style of Fiber connector built into this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.44 | cgfeb100FiberFullDuplexCfg | 0 | 0 | The desired duplex setting of the Fiber interface. This can be set to fdx(1) (full duplex) or hdx(2) (half duplex). When cgfeb100… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.45 | cgfeb100FiberFullDuplexStat | 0 | 0 | The actual duplex behavior of the Fiber interface: fdx(1) (full duplex) or hdx(2) (half duplex). If cgfeb100FiberAutonegot(46) ha… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.46 | cgfeb100FiberAutoNegot | 0 | 0 | Autonegotiation configuration. Fiber autonegotiation is limited to the duplex setting. The fiber's speed is fixed at 1000Mbps. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.47 | cgfeb100FiberAdv1000HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(24)… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.48 | cgfeb100FiberAdv1000FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(24)… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.49 | cgfeb100FiberLpAdv1000HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 1000Mbps, half duplex. This se… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.50 | cgfeb100FiberLpAdv1000FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 1000Mbps, full duplex. This se… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.51 | cgfeb100FiberLpAdvPause | 0 | 0 | This read-only variable shows the pause capability advertised by the fiber port's link partner. Values 1 through 4 for this varia… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.52 | cgfeb100FiberAdvPause | 0 | 0 | Enable/disable control for autonegotiation advertising of Fiber Pause capability. Selectable values are symmetric(1), asymRX(2) (… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.53 | cgfeb100FiberQosPause | 0 | 0 | This variable allows Fiber Quality Of Service Pause to be enabled or disabled. When cgfeb100QosEnabled(12) is set to enabled(1) a… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.54 | cgfeb100FiberSacCfg | 0 | 0 | This variable allows Source Address Change traps to be enabled or disabled. If enabled, 'Error' traps will be sent as frequently … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.55 | cgfeb100FiberSacStat | 0 | 0 | This read-only variable has the value changed(1) if the Ethernet source address received on the fiber interface changed since the… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.56 | cgfeb100MonitorTap | 0 | 0 | Before reading this description, see cgfeb100MonitorType(10). This variable controls which side of the fiber port (transmit(1) or… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.57 | cgfeb100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |