This read-only variable shows the pause capability
advertised by the fiber port's link partner.
Values 1 through 4 for this variable are the same as those
for cgfeb100TpAdvPause(38). If the device does not support
the reporting of link partner autonegotiation or
cgfeb100FiberAutonegot(46) has the value disabled(2), this
variable will have the value notApplicable(5).
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgfeb100FiberLpAdvPause OBJECT-TYPE SYNTAX INTEGER { symetric(1), asymRX(2), asymTX(3), disabled(4), notApplicable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This read-only variable shows the pause capability advertised by the fiber port's link partner. Values 1 through 4 for this variable are the same as those for cgfeb100TpAdvPause(38). If the device does not support the reporting of link partner autonegotiation or cgfeb100FiberAutonegot(46) has the value disabled(2), this variable will have the value notApplicable(5)." ::= { cgfeb100Entry 51 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.23.1.1 | cgfeb100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.2 | cgfeb100SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.3 | cgfeb100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.4 | cgfeb100MRevision | 0 | 0 | The marketing revision of this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.5 | cgfeb100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.6 | cgfeb100SerialNumber | 0 | 0 | The serial number of this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.7 | cgfeb100ConfigMode | 0 | 0 | This device may have a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP man… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.8 | cgfeb100FirmwareRevision | 0 | 0 | The firmware revision level for this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.9 | cgfeb100SelfTestFailed | 0 | 0 | cgfeb100SelftestFailed |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.10 | cgfeb100MonitorType | 0 | 0 | Some versions of this device support the monitoring of network traffic passing through the converter's fiber interface via a dedi… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.11 | cgfeb100LinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.12 | cgfeb100QosEnabled | 0 | 0 | This variable allows Quality of Service functions to be enabled or disabled. This includes the processing of 802.1p tags (See cg… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.13 | cgfeb100QosHPThreshold | 0 | 0 | When an incoming 802.1p priority tag value is greater than or equal to this value (from 0 to 7), the incoming packet will be clas… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.14 | cgfeb100QosLqWeight | 0 | 0 | A value between 1 and 15 indicating the number of packets that should be processed from the low-priority queue before attention i… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.15 | cgfeb100QosHqWeight | 0 | 0 | A value between 1 and 15 indicating the number of packets that should be processed from the high-priority queue before attention … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.16 | cgfeb100ConnA | 0 | 0 | The style of copper connector built into this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.17 | cgfeb100TPLink | 0 | 0 | Twisted Pair link status. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.18 | cgfeb100TPSpeedCfg | 0 | 0 | The desired speed of the Twisted Pair interface. This speed can be set to 10Mbps(1) or 100Mbps(2). Operation at 1000Mbps requires… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.19 | cgfeb100TPSpeedStat | 0 | 0 | The actual speed of the Twisted Pair interface: 10Mbps(1), 100Mbps(2), or 1000Mbps(3). If cgfeb100TpAutonegot(24) has the value e… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.20 | cgfeb100TPFullDuplexCfg | 0 | 0 | The desired duplex setting of the Twisted Pair interface. This can be set to fdx(1) (full duplex) or hdx(2) (half duplex). When c… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.21 | cgfeb100TPFullDuplexStat | 0 | 0 | The actual duplex behavior of the Twisted Pair interface. If cgfeb100TpAutonegot(24) has the value enabled(1) and cgfeb100TpLink(… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.22 | cgfeb100TPCrossCfg | 0 | 0 | The desired TX/RX Pair orientation of the Twisted Pair interface. This can be set to mdi(1) (straight through), mdix(2) (crossed … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.23 | cgfeb100TPCrossStat | 0 | 0 | The actual TX/RX Pair orientation of the Twisted Pair interface, usually mdi(1) (straight through) or mdix(2) (crossed over). Whe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.24 | cgfeb100TPAutoNegot | 0 | 0 | Enables or disables autonegtiation of link speed and duplex for twisted pair ports. Not supported on Fiber ports. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.25 | cgfeb100TPAdv10HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.26 | cgfeb100TPAdv10FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.27 | cgfeb100TPAdv100HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.28 | cgfeb100TPAdv100FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.29 | cgfeb100TPAdv1000HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.30 | cgfeb100TPAdv1000FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(2… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.31 | cgfeb100TPLpAdvPause | 0 | 0 | This read-only variable shows the pause capability advertised by the twisted pair port's link partner. Values 1 through 4 for thi… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.32 | cgfeb100TPLpAdv10HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 10Mbps Half Duplex. If the device does… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.33 | cgfeb100TPLpAdv10FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 10Mbps Full Duplex. If the device does… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.34 | cgfeb100TPLpAdv100HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 100Mbps Half Duplex. If the device doe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.35 | cgfeb100TPLpAdv100FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 100Mbps Full Duplex. If the device doe… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.36 | cgfeb100TPLpAdv1000HDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 1000Mbps Half Duplex. If the device do… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.37 | cgfeb100TPLpAdv1000FDX | 0 | 0 | This read-only variable shows twisted pair port's link partner's willingness to connect at 1000Mbps Full Duplex. If the device do… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.38 | cgfeb100TPAdvPause | 0 | 0 | Enable/disable control for autonegotiation advertising of Twisted Pair Pause capability. Selectable values are symmetric(1), asy… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.39 | cgfeb100TPQosPause | 0 | 0 | This variable allows Twisted Pair Quality Of Service Pause to be enabled or disabled. When cgfeb100QosEnabled(12) is set to enabl… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.40 | cgfeb100TPSacCfg | 0 | 0 | This variable allows Source Address Change traps to be enabled or disabled. If enabled, 'Error' traps will be sent as frequently … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.41 | cgfeb100TPSacStat | 0 | 0 | This read-only variable has the value changed(1) if the Ethernet source address received on the Twisted Pair interface changed si… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.42 | cgfeb100ConnB | 0 | 0 | The style of Fiber connector built into this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.43 | cgfeb100FiberLink | 0 | 0 | The Fiber Link status for this device. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.44 | cgfeb100FiberFullDuplexCfg | 0 | 0 | The desired duplex setting of the Fiber interface. This can be set to fdx(1) (full duplex) or hdx(2) (half duplex). When cgfeb100… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.45 | cgfeb100FiberFullDuplexStat | 0 | 0 | The actual duplex behavior of the Fiber interface: fdx(1) (full duplex) or hdx(2) (half duplex). If cgfeb100FiberAutonegot(46) ha… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.46 | cgfeb100FiberAutoNegot | 0 | 0 | Autonegotiation configuration. Fiber autonegotiation is limited to the duplex setting. The fiber's speed is fixed at 1000Mbps. |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.47 | cgfeb100FiberAdv1000HDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(24)… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.48 | cgfeb100FiberAdv1000FDX | 0 | 0 | Enable/disable control for these advertised autonegotiation modes. If autonegotiation is disabled (because cgfeb100TpAutonegot(24)… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.49 | cgfeb100FiberLpAdv1000HDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 1000Mbps, half duplex. This se… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.50 | cgfeb100FiberLpAdv1000FDX | 0 | 0 | This configuration setting controls whether or not each port advertises willingness to connect at 1000Mbps, full duplex. This se… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.52 | cgfeb100FiberAdvPause | 0 | 0 | Enable/disable control for autonegotiation advertising of Fiber Pause capability. Selectable values are symmetric(1), asymRX(2) (… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.53 | cgfeb100FiberQosPause | 0 | 0 | This variable allows Fiber Quality Of Service Pause to be enabled or disabled. When cgfeb100QosEnabled(12) is set to enabled(1) a… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.54 | cgfeb100FiberSacCfg | 0 | 0 | This variable allows Source Address Change traps to be enabled or disabled. If enabled, 'Error' traps will be sent as frequently … |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.55 | cgfeb100FiberSacStat | 0 | 0 | This read-only variable has the value changed(1) if the Ethernet source address received on the fiber interface changed since the… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.56 | cgfeb100MonitorTap | 0 | 0 | Before reading this description, see cgfeb100MonitorType(10). This variable controls which side of the fiber port (transmit(1) or… |
1.3.6.1.4.1.868.2.4.1.2.2.23.1.57 | cgfeb100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |