Status and configuration entries for a single CRMFE100
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
crmfe100Entry OBJECT-TYPE SYNTAX Crmfe100Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single CRMFE100" INDEX { crmfe100BiaIndex, crmfe100SlotIndex } ::= { crmfe100Table 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.1 | crmfe100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.2 | crmfe100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.3 | crmfe100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.4 | crmfe100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.5 | crmfe100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.6 | crmfe100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.7 | crmfe100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.8 | crmfe100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.9 | crmfe100TPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.10 | crmfe100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.11 | crmfe100Fault | 0 | 0 | Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.12 | crmfe100Autonegot | 0 | 0 | Autonegotiation configuration for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.13 | crmfe100Enabled | 0 | 0 | When the Enabled configuration item is set to no(2), the converter passes no network traffic in either direction. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.14 | crmfe100Pause | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. Support for Pause is n… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.15 | crmfe100LinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.16 | crmfe100AutoCross | 0 | 0 | On certain devices, it is possible for hardware to automatically correct errors in cable selection, making the distinction betwee… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.17 | crmfe100TPActivity | 0 | 0 | Twisted Pair Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variab… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.18 | crmfe100FiberActivity | 0 | 0 | Fiber Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variable for … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.19 | crmfe100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.20 | crmfe100FarEndFault | 0 | 0 | Far End Fault configuration of this device. Far End Fault causes the fiber transmitter to generate a Far End Fault pattern upon … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.21 | crmfe100NetworkMode | 0 | 0 | Read-only indicator for High Speed Token Ring jumper configuration. If the variable reads tokenRing(1), then the converter is jum… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.22 | crmfe100UpTime | 0 | 0 | Time since the last reboot in Time Ticks (hundredths of seconds). If the value 0 is written to this variable, the timer is reset.… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.23 | crmfe100FirmwareRevision | 0 | 0 | Firmware revision level of this CRMFE100. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.24 | crmfe100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media converter. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.25 | crmfe100RmtTPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.26 | crmfe100RmtFiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.27 | crmfe100RmtFault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.28 | crmfe100RmtAutonegot | 0 | 0 | Autonegotiation configuration for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.29 | crmfe100RmtPause | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. Support for Pause is n… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.30 | crmfe100RmtLinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.31 | crmfe100RmtAutoCross | 0 | 0 | On certain devices, it is possible for hardware to automatically correct errors in cable selection, making the distinction betwee… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.32 | crmfe100RmtTPActivity | 0 | 0 | Twisted Pair Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variab… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.33 | crmfe100RmtFiberActivity | 0 | 0 | Fiber Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variable for … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.34 | crmfe100RmtConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.35 | crmfe100RmtFarEndFault | 0 | 0 | Far End Fault configuration of this device. Far End Fault causes the fiber transmitter to generate a Far End Fault pattern upon … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.36 | crmfe100RmtLoopback | 0 | 0 | When Remote Loopback is enabled, all packets sent out from the local fiber interface are reflected back by the remote converter r… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.37 | crmfe100RmtNetworkMode | 0 | 0 | Read-only indicator for High Speed Token Ring jumper configuration. If the variable reads tokenRing(1), then the converter is jum… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.38 | crmfe100RmtUpTime | 0 | 0 | Time since the last reboot in Time Ticks (hundredths of seconds). If the value 0 is written to this variable, the timer is reset.… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.39 | crmfe100TxFxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Kilobytes per Second, and is a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.40 | crmfe100FxTxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Kilobytes per Second, and is a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.41 | crmfe100TxBytesH | 0 | 0 | These variables measure the traffic (in Bytes) received by the two interfaces of the converter (and therefore transmitted by the … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.42 | crmfe100TxBytesL | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.43 | crmfe100FxBytesH | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.44 | crmfe100FxBytesL | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.45 | crmfe100MscRxBytes | 0 | 0 | This variable measures the traffic (in Bytes) received and transmitted by the Management Subchannel within the Fiber interface. '… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.46 | crmfe100MscTxBytes | 0 | 0 | This variable measures the traffic (in Bytes) received and transmitted by the Management Subchannel within the Fiber interface. '… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.47 | crmfe100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.48 | crmfe100MbTxFxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Megabits per Second, and is au… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.49 | crmfe100MbFxTxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Megabits per Second, and is au… |