This variable allows the control of bandwidth allocation.
The value of this variable is entered in Megabits per Second,
and is automatically rounded to the nearest 64KBps. A value of
zero disables data transfer, and the maximum value is
12224KBps. Data traffic is measured from the beginning of each
second. Once the traffic reaches the cap specified, all traffic
is discarded until the start of the next second, when the
counters are reset and traffic begins to flow again.
crmfe100MbFxTxBwa(49) limits the data flowing from the fiber
interface to the twisted pair interface. This variable does the
same thing as crmfe100TxFxBwa(40), only the units are different.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
crmfe100MbFxTxBwa OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable allows the control of bandwidth allocation. The value of this variable is entered in Megabits per Second, and is automatically rounded to the nearest 64KBps. A value of zero disables data transfer, and the maximum value is 12224KBps. Data traffic is measured from the beginning of each second. Once the traffic reaches the cap specified, all traffic is discarded until the start of the next second, when the counters are reset and traffic begins to flow again. crmfe100MbFxTxBwa(49) limits the data flowing from the fiber interface to the twisted pair interface. This variable does the same thing as crmfe100TxFxBwa(40), only the units are different." ::= { crmfe100Entry 49 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.1 | crmfe100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.2 | crmfe100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.3 | crmfe100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.4 | crmfe100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.5 | crmfe100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.6 | crmfe100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.7 | crmfe100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.8 | crmfe100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.9 | crmfe100TPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.10 | crmfe100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.11 | crmfe100Fault | 0 | 0 | Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.12 | crmfe100Autonegot | 0 | 0 | Autonegotiation configuration for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.13 | crmfe100Enabled | 0 | 0 | When the Enabled configuration item is set to no(2), the converter passes no network traffic in either direction. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.14 | crmfe100Pause | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. Support for Pause is n… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.15 | crmfe100LinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.16 | crmfe100AutoCross | 0 | 0 | On certain devices, it is possible for hardware to automatically correct errors in cable selection, making the distinction betwee… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.17 | crmfe100TPActivity | 0 | 0 | Twisted Pair Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variab… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.18 | crmfe100FiberActivity | 0 | 0 | Fiber Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variable for … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.19 | crmfe100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.20 | crmfe100FarEndFault | 0 | 0 | Far End Fault configuration of this device. Far End Fault causes the fiber transmitter to generate a Far End Fault pattern upon … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.21 | crmfe100NetworkMode | 0 | 0 | Read-only indicator for High Speed Token Ring jumper configuration. If the variable reads tokenRing(1), then the converter is jum… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.22 | crmfe100UpTime | 0 | 0 | Time since the last reboot in Time Ticks (hundredths of seconds). If the value 0 is written to this variable, the timer is reset.… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.23 | crmfe100FirmwareRevision | 0 | 0 | Firmware revision level of this CRMFE100. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.24 | crmfe100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media converter. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.25 | crmfe100RmtTPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.26 | crmfe100RmtFiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.27 | crmfe100RmtFault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.28 | crmfe100RmtAutonegot | 0 | 0 | Autonegotiation configuration for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.29 | crmfe100RmtPause | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. Support for Pause is n… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.30 | crmfe100RmtLinkPassThrough | 0 | 0 | This configuration item allows Link Pass Through to be enabled(1) or disabled(2). Link Passthrough causes loss of link on one sid… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.31 | crmfe100RmtAutoCross | 0 | 0 | On certain devices, it is possible for hardware to automatically correct errors in cable selection, making the distinction betwee… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.32 | crmfe100RmtTPActivity | 0 | 0 | Twisted Pair Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variab… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.33 | crmfe100RmtFiberActivity | 0 | 0 | Fiber Activity. Some versions of the CRMFE100 do not support the reporting of interface activity. The value of this variable for … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.34 | crmfe100RmtConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.35 | crmfe100RmtFarEndFault | 0 | 0 | Far End Fault configuration of this device. Far End Fault causes the fiber transmitter to generate a Far End Fault pattern upon … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.36 | crmfe100RmtLoopback | 0 | 0 | When Remote Loopback is enabled, all packets sent out from the local fiber interface are reflected back by the remote converter r… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.37 | crmfe100RmtNetworkMode | 0 | 0 | Read-only indicator for High Speed Token Ring jumper configuration. If the variable reads tokenRing(1), then the converter is jum… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.38 | crmfe100RmtUpTime | 0 | 0 | Time since the last reboot in Time Ticks (hundredths of seconds). If the value 0 is written to this variable, the timer is reset.… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.39 | crmfe100TxFxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Kilobytes per Second, and is a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.40 | crmfe100FxTxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Kilobytes per Second, and is a… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.41 | crmfe100TxBytesH | 0 | 0 | These variables measure the traffic (in Bytes) received by the two interfaces of the converter (and therefore transmitted by the … |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.42 | crmfe100TxBytesL | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.43 | crmfe100FxBytesH | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.44 | crmfe100FxBytesL | 0 | 0 | See the DESCRIPTION for cfmfe100TxBytesH(42) above. |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.45 | crmfe100MscRxBytes | 0 | 0 | This variable measures the traffic (in Bytes) received and transmitted by the Management Subchannel within the Fiber interface. '… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.46 | crmfe100MscTxBytes | 0 | 0 | This variable measures the traffic (in Bytes) received and transmitted by the Management Subchannel within the Fiber interface. '… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.47 | crmfe100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |
| 1.3.6.1.4.1.868.2.4.1.2.2.24.1.48 | crmfe100MbTxFxBwa | 0 | 0 | This variable allows the control of bandwidth allocation. The value of this variable is entered in Megabits per Second, and is au… |