The Firmware Revision MIB Variable reports the revision
of software running on the processor on this particular
device. You can discover the revisions on these devices
by entering the PICREV command at the command line
interface. Device Firmware Revisions are normally
discussed in terms of a single letter, e.g. revision 'B'.
However, when the firmware revision is displayed by
generic MIB processing code that is unaware of this
convention, the revision is displayed as a decimal value.
The table in crs2f100.html provides some examples of how
decimal revision values correspond to letter revision
values.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
crs2f100FirmwareRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Firmware Revision MIB Variable reports the revision of software running on the processor on this particular device. You can discover the revisions on these devices by entering the PICREV command at the command line interface. Device Firmware Revisions are normally discussed in terms of a single letter, e.g. revision 'B'. However, when the firmware revision is displayed by generic MIB processing code that is unaware of this convention, the revision is displayed as a decimal value. The table in crs2f100.html provides some examples of how decimal revision values correspond to letter revision values." ::= { crs2f100Entry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.25.1.1 | crs2f100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.2 | crs2f100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.3 | crs2f100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.4 | crs2f100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.5 | crs2f100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.6 | crs2f100SerialNumber | 0 | 0 | The serial number of this device |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.7 | crs2f100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.8 | crs2f100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.9 | crs2f100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.10 | crs2f100Fault | 0 | 0 | Value is yes(1) when FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.12 | crs2f100Loopback | 0 | 0 | Loopback is a testing aid available on several different products. When Loopback is enabled on an interface, all data that is sen… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.13 | crs2f100DCE | 0 | 0 | An indication of whether this device is attached to a DCE (a modem) or a DTE (a terminal or computer). |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.14 | crs2f100CopperActivity | 0 | 0 | The activity indicator has the value yes(1) when the hardware has recently detected network traffic on the associated network por… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.15 | crs2f100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.16 | crs2f100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media device. |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.17 | crs2f100RmtLoopback | 0 | 0 | Loopback is a testing aid available on several different products. When Loopback is enabled on an interface, all data that is sen… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.18 | crs2f100RmtDCE | 0 | 0 | This variable describes the status of a remotely managed device. This is an indicator of whether this device is attached to a DC… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.19 | crs2f100RmtCopperActivity | 0 | 0 | The activity indicator has the value yes(1) when the hardware has recently detected network traffic on the associated network por… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.20 | crs2f100RmtConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.25.1.21 | crs2f100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |