Status and configuration entries for a single CSDTF100
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
csdtf100Entry OBJECT-TYPE SYNTAX Csdtf100Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and configuration entries for a single CSDTF100" INDEX { csdtf100BiaIndex, csdtf100SlotIndex } ::= { csdtf100Table 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.1 | csdtf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.2 | csdtf100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.3 | csdtf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.4 | csdtf100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.5 | csdtf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.6 | csdtf100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.7 | csdtf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.8 | csdtf100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.9 | csdtf100CopperLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.10 | csdtf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.11 | csdtf100Fault | 0 | 0 | Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.12 | csdtf100TAOSFiber | 0 | 0 | Transmit All Ones on Fiber as an error signal when Copper interface is down. When this error signal is transmitted, the AIS of th… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.13 | csdtf100TAOSCopper | 0 | 0 | Transmit All Ones on Copper as an error signal when Fiber interface is down. When this error signal is transmitted, the AIS of t… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.14 | csdtf100AISFiber | 0 | 0 | Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is currently transmitting an … |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.15 | csdtf100AISCopper | 0 | 0 | Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is currently transmitting an … |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.16 | csdtf100CopperLoopback | 0 | 0 | Enable loopback on the copper interface. Copper Loopback causes all data that is sent to the copper interface to be transmitted b… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.17 | csdtf100CopperLongHaul | 0 | 0 | This variable indicates the current position of the device's long/short haul configuration switch. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.18 | csdtf100T1E1 | 0 | 0 | This variable indicates whether the current device is the T1 or the E1 version. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.19 | csdtf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.20 | csdtf100TPCoax | 0 | 0 | Indicates the connector type installed on the copper interface. For E1 converters, this can be either Twisted Pair or Coax. For T… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.21 | csdtf100CopperLineBuildout | 0 | 0 | The characteristics of the copper interface |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.22 | csdtf100FiberLoopback | 0 | 0 | Enable loopback on the Fiber interface. Fiber Loopback causes all data that is sent to the Fiber interface to be transmitted back… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.23 | csdtf100RmtSupported | 0 | 0 | Has the value yes(1) if this converter is capable of managing the media converter at the remote end of the fiber. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.24 | csdtf100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media converter. Always no(2) if TAOS is ena… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.25 | csdtf100RmtMRevision | 0 | 0 | Remote Marketing Revision. Same as csdtf100MRevision, only for the remote device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.26 | csdtf100RmtSerialNumber | 0 | 0 | Serial Number reported by remote device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.27 | csdtf100RmtConnA | 0 | 0 | The style of Fiber connector reported by remote device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.28 | csdtf100RmtConnB | 0 | 0 | The style of Fiber connector reported by remote device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.29 | csdtf100RmtCopperLink | 0 | 0 | Link status of remote Copper Port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.30 | csdtf100RmtFiberLink | 0 | 0 | Link status of remote Fiber Port. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.31 | csdtf100RmtFault | 0 | 0 | Remote Fault status. Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.32 | csdtf100RmtTAOSFiber | 0 | 0 | Remote Fiber TAOS configuration. Transmit All Ones on Fiber as an error signal when Copper interface is down. When this error si… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.33 | csdtf100RmtTAOSCopper | 0 | 0 | Remote Copper TAOS configuration. Transmit All Ones on Copper as an error signal when Fiber interface is down. When this error … |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.34 | csdtf100RmtAISFiber | 0 | 0 | Remote Fiber AIS status. Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is … |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.35 | csdtf100RmtAISCopper | 0 | 0 | Remote Copper AIS status. Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.36 | csdtf100RmtCopperLoopback | 0 | 0 | Remote Copper Loopback configuration. Enable loopback on the copper interface. Copper Loopback causes all data that is sent to t… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.37 | csdtf100RmtCopperLongHaul | 0 | 0 | This variable indicates the current position of the remote device's Short/Long haul configuration switch. |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.38 | csdtf100RmtConfigMode | 0 | 0 | Remote Configuration Mode. This device has a jumper or switch that disables software management of the device. When ConfigMode is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.39 | csdtf100RmtTPCoax | 0 | 0 | Indicates the connector type installed on the remote copper interface. For E1 converters, this can be either Twisted Pair or Coax… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.40 | csdtf100RmtCopperLineBuildout | 0 | 0 | The electrical characteristics of the remote Copper interface. Values are the same as the values for csdtf100CopperLineBuildout(… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.41 | csdtf100RmtFiberLoopback | 0 | 0 | Enable loopback on the remote Fiber interface. Fiber Loopback causes all data that is sent to the Fiber interface to be transmitt… |
| 1.3.6.1.4.1.868.2.4.1.2.2.9.1.42 | csdtf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |