Indicates the connector type installed on the
copper interface. For E1 converters, this can
be either Twisted Pair or Coax. For T1, it
is always Twisted Pair.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
csdtf100TPCoax OBJECT-TYPE SYNTAX INTEGER { tp(1), coax(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the connector type installed on the copper interface. For E1 converters, this can be either Twisted Pair or Coax. For T1, it is always Twisted Pair." ::= { csdtf100Entry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.9.1.1 | csdtf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.2 | csdtf100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.3 | csdtf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.4 | csdtf100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.5 | csdtf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.6 | csdtf100SerialNumber | 0 | 0 | The serial number of this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.7 | csdtf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.8 | csdtf100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.9 | csdtf100CopperLink | 0 | 0 | Status of Copper Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.10 | csdtf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.11 | csdtf100Fault | 0 | 0 | Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.12 | csdtf100TAOSFiber | 0 | 0 | Transmit All Ones on Fiber as an error signal when Copper interface is down. When this error signal is transmitted, the AIS of th… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.13 | csdtf100TAOSCopper | 0 | 0 | Transmit All Ones on Copper as an error signal when Fiber interface is down. When this error signal is transmitted, the AIS of t… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.14 | csdtf100AISFiber | 0 | 0 | Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is currently transmitting an … |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.15 | csdtf100AISCopper | 0 | 0 | Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is currently transmitting an … |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.16 | csdtf100CopperLoopback | 0 | 0 | Enable loopback on the copper interface. Copper Loopback causes all data that is sent to the copper interface to be transmitted b… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.17 | csdtf100CopperLongHaul | 0 | 0 | This variable indicates the current position of the device's long/short haul configuration switch. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.18 | csdtf100T1E1 | 0 | 0 | This variable indicates whether the current device is the T1 or the E1 version. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.19 | csdtf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.21 | csdtf100CopperLineBuildout | 0 | 0 | The characteristics of the copper interface |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.22 | csdtf100FiberLoopback | 0 | 0 | Enable loopback on the Fiber interface. Fiber Loopback causes all data that is sent to the Fiber interface to be transmitted back… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.23 | csdtf100RmtSupported | 0 | 0 | Has the value yes(1) if this converter is capable of managing the media converter at the remote end of the fiber. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.24 | csdtf100RmtDetected | 0 | 0 | Has the value yes(1) if management communcations have been established with a remote media converter. Always no(2) if TAOS is ena… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.25 | csdtf100RmtMRevision | 0 | 0 | Remote Marketing Revision. Same as csdtf100MRevision, only for the remote device. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.26 | csdtf100RmtSerialNumber | 0 | 0 | Serial Number reported by remote device. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.27 | csdtf100RmtConnA | 0 | 0 | The style of Fiber connector reported by remote device. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.28 | csdtf100RmtConnB | 0 | 0 | The style of Fiber connector reported by remote device. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.29 | csdtf100RmtCopperLink | 0 | 0 | Link status of remote Copper Port. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.30 | csdtf100RmtFiberLink | 0 | 0 | Link status of remote Fiber Port. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.31 | csdtf100RmtFault | 0 | 0 | Remote Fault status. Value is yes(1) when either CopperLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.32 | csdtf100RmtTAOSFiber | 0 | 0 | Remote Fiber TAOS configuration. Transmit All Ones on Fiber as an error signal when Copper interface is down. When this error si… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.33 | csdtf100RmtTAOSCopper | 0 | 0 | Remote Copper TAOS configuration. Transmit All Ones on Copper as an error signal when Fiber interface is down. When this error … |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.34 | csdtf100RmtAISFiber | 0 | 0 | Remote Fiber AIS status. Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is … |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.35 | csdtf100RmtAISCopper | 0 | 0 | Remote Copper AIS status. Alarm Indication Signal. When equal to alarm(1), this means that the other end has TAOS enabled and is… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.36 | csdtf100RmtCopperLoopback | 0 | 0 | Remote Copper Loopback configuration. Enable loopback on the copper interface. Copper Loopback causes all data that is sent to t… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.37 | csdtf100RmtCopperLongHaul | 0 | 0 | This variable indicates the current position of the remote device's Short/Long haul configuration switch. |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.38 | csdtf100RmtConfigMode | 0 | 0 | Remote Configuration Mode. This device has a jumper or switch that disables software management of the device. When ConfigMode is… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.39 | csdtf100RmtTPCoax | 0 | 0 | Indicates the connector type installed on the remote copper interface. For E1 converters, this can be either Twisted Pair or Coax… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.40 | csdtf100RmtCopperLineBuildout | 0 | 0 | The electrical characteristics of the remote Copper interface. Values are the same as the values for csdtf100CopperLineBuildout(… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.41 | csdtf100RmtFiberLoopback | 0 | 0 | Enable loopback on the remote Fiber interface. Fiber Loopback causes all data that is sent to the Fiber interface to be transmitt… |
1.3.6.1.4.1.868.2.4.1.2.2.9.1.42 | csdtf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |