Enable or Disable session tracking. Usually, when working with Firewall
we need to send the whole traffic of a specific session through the same Firewall.
For this purpose we should keep track of the session and use the enable option.
When working with routers, sending the whole traffic through the same Firewall
is not necessary. Therefor there is no need to keep track of the sessions and
we can use the disable option.
Parsed from file LPMIB21x.txt
Company: None
Module: MLB-MIB
Enable or Disable session tracking. Usually, when working with Firewall
we need to send the whole traffic of a specific session through the same Firewall.
For this purpose we should keep track of the session and use the enable option.
When working with routers, sending the whole traffic through the same Firewall
is not necessary. Therefor there is no need to keep track of the sessions and
we can use the disable option.
Parsed from file MLB-MIB.mib
Module: MLB-MIB
rsMLBSessionTracking OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session through the same Firewall. For this purpose we should keep track of the session and use the enable option. When working with routers, sending the whole traffic through the same Firewall is not necessary. Therefor there is no need to keep track of the sessions and we can use the disable option." ::= {rsMLB 11}
Vendor: RND
Module: MLB-MIB
[Automatically extracted from oidview.com]
rsMLBSessionTracking OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session through the same Firewall. For this purpose we should keep track of the session and use the enable option. When working with routers, sending the whole traffic through the same Firewall is not necessary. Therefor there is no need to keep track of the sessions and we can use the disable option." ::= {rsMLB 11}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.38.11.0 | rsMLBSessionTracking | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.38.1 | rsMLBApplicationServersTable | 2 | 25 | Table containing the list of application servers to which the clients requested are dispatched. |
| 1.3.6.1.4.1.89.35.1.38.2 | rsMLBAdminStatus | 1 | 1 | Enable/Disable server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.3 | rsMLBClientsLifeTime | 1 | 1 | Maximal period of time in seconds a non-active client is kept in the clients table. |
| 1.3.6.1.4.1.89.35.1.38.4 | rsMLBDispatchMethod | 1 | 1 | Type of dispatching required. |
| 1.3.6.1.4.1.89.35.1.38.5 | rsMLBCheckConnectivityStatus | 1 | 1 | Enable or Disable servers polling. |
| 1.3.6.1.4.1.89.35.1.38.6 | rsMLBCheckConnectivityMethod | 1 | 1 | This variable indicate the method the MLB check the connectivity. where the value 1 means check connectiotivity by ping, other v… |
| 1.3.6.1.4.1.89.35.1.38.7 | rsMLBCheckConnectivityInterval | 1 | 1 | Polling interval in seconds for servers polling. |
| 1.3.6.1.4.1.89.35.1.38.8 | rsMLBCheckConnectivityRetries | 1 | 1 | This variable indicate the Minimal number of unsuccessful polling attempts before considering a server disconnected. |
| 1.3.6.1.4.1.89.35.1.38.9 | rsMLBClientsConnectDenials | 1 | 1 | This variable indicate the Number of connection requests from clients that were denied by the the server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.10 | rsMLBClientsTable | 2 | 9 | Table containing the list of clients currently attached to a server. |
| 1.3.6.1.4.1.89.35.1.38.12 | rsMLBRemoteConnectivityTable | 2 | 7 | Table containing the list of IPs which the connectivity check is performed on them. |
| 1.3.6.1.4.1.89.35.1.38.13 | rsMLBClientTableMode | 1 | 1 | Determine the mode of keep entries in the client table. layer 3 means that entries are kept according to source Ip and destinati… |
| 1.3.6.1.4.1.89.35.1.38.14 | rsMLBRulesTable | 2 | 6 | Table containing the list of |
| 1.3.6.1.4.1.89.35.1.38.15 | rsMLBTranslateOutBoundMode | 1 | 1 | Translate FW NAT IP address to a virtual IP address for traffic that originated inside |
| 1.3.6.1.4.1.89.35.1.38.16 | rsMLBVirtualIPTable | 2 | 6 | The table for storing the VIP's |
| 1.3.6.1.4.1.89.35.1.38.17 | rsMLBMappedIPTable | 2 | 7 | The table for storing the mapped VIP entries |
| 1.3.6.1.4.1.89.35.1.38.18 | rsMLBVirtualConnectivityIP | 1 | 1 | The virtual connectivity IP address |
| 1.3.6.1.4.1.89.35.1.38.19 | rsMLBVirtualConnectivityMode | 1 | 1 | The virtual IP mode - either backup/regular |
| 1.3.6.1.4.1.89.35.1.38.20 | rsMLBRemoveEntryAtSessionEnd | 1 | 1 | Remove client entry at session end. |
| 1.3.6.1.4.1.89.35.1.38.21 | rsMLBFirewallPortID | 1 | 1 | Identify Firewall not only by Mac but also by port |
| 1.3.6.1.4.1.89.35.1.38.23 | rsMLBSubnetGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular destination subnet group. |
| 1.3.6.1.4.1.89.35.1.38.24 | rsMLBApplicationPortGroupTable | 2 | 7 | Table containing the list of FW which belong to a particular application port group. |
| 1.3.6.1.4.1.89.35.1.38.25 | rsMLBSrcSbntGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular source subnet group. |
| 1.3.6.1.4.1.89.35.1.38.26 | rsMLBNatTable | 2 | 7 | In this table the FP saves the NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.27 | rsMLBFpNatStatus | 1 | 1 | Nat Status. |
| 1.3.6.1.4.1.89.35.1.38.28 | rsMLBStaticNatTable | 2 | 8 | In this table the FP saves the static NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.29 | rsMLBProximity | 12 | 38 | None |
| 1.3.6.1.4.1.89.35.1.38.30 | rsMLBDNS | 4 | 18 | None |
| 1.3.6.1.4.1.89.35.1.38.31 | rsMLBSrcPortInClientHash | 1 | 1 | enable - client's source port is used in client table hashing, disable - only client IP and destination IP are used. |
| 1.3.6.1.4.1.89.35.1.38.32 | rsMLBAgingTimeTable | 2 | 6 | This table determine the aging time for specific applications. |