rsMLBProximity OBJECT IDENTIFIER ::= { rsMLB 29 }
Vendor: RND
Module: MLB-MIB
[Automatically extracted from oidview.com]
rsMLBProximity OBJECT IDENTIFIER ::= { rsMLB 29 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.38.29.1 | rsMLBStaticProximityTable | 1 | 7 | In this table the MLB saves the static proximity ranges per server farm IP Address |
| 1.3.6.1.4.1.89.35.1.38.29.2 | rsMLBProximityOperationMode | 1 | 1 | Allow proximity operation, and choose between operating only static proximity or dynamic proximity as well |
| 1.3.6.1.4.1.89.35.1.38.29.3 | rsMLBProximityMainDNS | 1 | 1 | The IP Address of the main DNS to be ignored in the proximity operation |
| 1.3.6.1.4.1.89.35.1.38.29.4 | rsMLBProximityBackupDNS | 1 | 1 | The IP Address of the backup DNS to be ignored in the proximity operation |
| 1.3.6.1.4.1.89.35.1.38.29.5 | rsMLBProximityAgingPeriod | 1 | 1 | The time in hours after which an old dynamic entry is invalid. |
| 1.3.6.1.4.1.89.35.1.38.29.6 | rsMLBProximityRetries | 1 | 1 | The number of tries for checking the client distance |
| 1.3.6.1.4.1.89.35.1.38.29.7 | rsMLBProximityTimeout | 1 | 1 | The timeout between proximity checks |
| 1.3.6.1.4.1.89.35.1.38.29.8 | rsMLBProximityTuning | 2 | 4 | None |
| 1.3.6.1.4.1.89.35.1.38.29.9 | rsMLBProximityHopsWeight | 1 | 1 | The weight given to the clients hops distance in the dispatching decision |
| 1.3.6.1.4.1.89.35.1.38.29.10 | rsMLBProximityLatencyWeight | 1 | 1 | The weight given to the clients latency in the dispatching decision |
| 1.3.6.1.4.1.89.35.1.38.29.11 | rsMLBProximityLoadWeight | 1 | 1 | The weight given to the site load in the dispatching decision |
| 1.3.6.1.4.1.89.35.1.38.29.12 | rsMLBPrxyCheckFPIPTable | 2 | 6 | Table containing FP IP address for each server. This FP IP serves as the source IP for the proximity check packet which is send… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.38.1 | rsMLBApplicationServersTable | 2 | 25 | Table containing the list of application servers to which the clients requested are dispatched. |
| 1.3.6.1.4.1.89.35.1.38.2 | rsMLBAdminStatus | 1 | 1 | Enable/Disable server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.3 | rsMLBClientsLifeTime | 1 | 1 | Maximal period of time in seconds a non-active client is kept in the clients table. |
| 1.3.6.1.4.1.89.35.1.38.4 | rsMLBDispatchMethod | 1 | 1 | Type of dispatching required. |
| 1.3.6.1.4.1.89.35.1.38.5 | rsMLBCheckConnectivityStatus | 1 | 1 | Enable or Disable servers polling. |
| 1.3.6.1.4.1.89.35.1.38.6 | rsMLBCheckConnectivityMethod | 1 | 1 | This variable indicate the method the MLB check the connectivity. where the value 1 means check connectiotivity by ping, other v… |
| 1.3.6.1.4.1.89.35.1.38.7 | rsMLBCheckConnectivityInterval | 1 | 1 | Polling interval in seconds for servers polling. |
| 1.3.6.1.4.1.89.35.1.38.8 | rsMLBCheckConnectivityRetries | 1 | 1 | This variable indicate the Minimal number of unsuccessful polling attempts before considering a server disconnected. |
| 1.3.6.1.4.1.89.35.1.38.9 | rsMLBClientsConnectDenials | 1 | 1 | This variable indicate the Number of connection requests from clients that were denied by the the server dispatcher. |
| 1.3.6.1.4.1.89.35.1.38.10 | rsMLBClientsTable | 2 | 9 | Table containing the list of clients currently attached to a server. |
| 1.3.6.1.4.1.89.35.1.38.11 | rsMLBSessionTracking | 1 | 1 | Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session … |
| 1.3.6.1.4.1.89.35.1.38.12 | rsMLBRemoteConnectivityTable | 2 | 7 | Table containing the list of IPs which the connectivity check is performed on them. |
| 1.3.6.1.4.1.89.35.1.38.13 | rsMLBClientTableMode | 1 | 1 | Determine the mode of keep entries in the client table. layer 3 means that entries are kept according to source Ip and destinati… |
| 1.3.6.1.4.1.89.35.1.38.14 | rsMLBRulesTable | 2 | 6 | Table containing the list of |
| 1.3.6.1.4.1.89.35.1.38.15 | rsMLBTranslateOutBoundMode | 1 | 1 | Translate FW NAT IP address to a virtual IP address for traffic that originated inside |
| 1.3.6.1.4.1.89.35.1.38.16 | rsMLBVirtualIPTable | 2 | 6 | The table for storing the VIP's |
| 1.3.6.1.4.1.89.35.1.38.17 | rsMLBMappedIPTable | 2 | 7 | The table for storing the mapped VIP entries |
| 1.3.6.1.4.1.89.35.1.38.18 | rsMLBVirtualConnectivityIP | 1 | 1 | The virtual connectivity IP address |
| 1.3.6.1.4.1.89.35.1.38.19 | rsMLBVirtualConnectivityMode | 1 | 1 | The virtual IP mode - either backup/regular |
| 1.3.6.1.4.1.89.35.1.38.20 | rsMLBRemoveEntryAtSessionEnd | 1 | 1 | Remove client entry at session end. |
| 1.3.6.1.4.1.89.35.1.38.21 | rsMLBFirewallPortID | 1 | 1 | Identify Firewall not only by Mac but also by port |
| 1.3.6.1.4.1.89.35.1.38.23 | rsMLBSubnetGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular destination subnet group. |
| 1.3.6.1.4.1.89.35.1.38.24 | rsMLBApplicationPortGroupTable | 2 | 7 | Table containing the list of FW which belong to a particular application port group. |
| 1.3.6.1.4.1.89.35.1.38.25 | rsMLBSrcSbntGroupTable | 2 | 8 | Table containing the list of FW which belong to a particular source subnet group. |
| 1.3.6.1.4.1.89.35.1.38.26 | rsMLBNatTable | 2 | 7 | In this table the FP saves the NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.27 | rsMLBFpNatStatus | 1 | 1 | Nat Status. |
| 1.3.6.1.4.1.89.35.1.38.28 | rsMLBStaticNatTable | 2 | 8 | In this table the FP saves the static NAT addresses. |
| 1.3.6.1.4.1.89.35.1.38.30 | rsMLBDNS | 4 | 18 | None |
| 1.3.6.1.4.1.89.35.1.38.31 | rsMLBSrcPortInClientHash | 1 | 1 | enable - client's source port is used in client table hashing, disable - only client IP and destination IP are used. |
| 1.3.6.1.4.1.89.35.1.38.32 | rsMLBAgingTimeTable | 2 | 6 | This table determine the aging time for specific applications. |