The MIB module which complements standard ATM MIBs for
Cisco devices, for Resource Management.
Parsed from file CISCO-ATM-RM-MIB.mib
Module: CISCO-ATM-RM-MIB
The MIB module which complements standard ATM MIBs for
Cisco devices, for Resource Management.
Parsed from file CISCO-ATM-RM-MIB.my.txt
Company: None
Module: CISCO-ATM-RM-MIB
The MIB module which complements standard ATM MIBs for
Cisco devices, for Resource Management.
ciscoAtmRmMIB MODULE-IDENTITY LAST-UPDATED "200206030000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management." REVISION "200206030000Z" DESCRIPTION "Added objects to support Per Class Overbooking for ATM interfaces." REVISION "200101290000Z" DESCRIPTION "Added a table that contains objects to manage ATM Traffic Shaper configuration and state information for ATM interfaces." REVISION "9912220000Z" DESCRIPTION "Fix the errors in the definition of cgrPerVcqAtmRmGroup." REVISION "9907270000Z" DESCRIPTION "Added object to support overbooking of equivalent bandwidth of an ATM interface." REVISION "9904300000Z" DESCRIPTION " Added objects for the IMA interface support." REVISION "9904140000Z" DESCRIPTION "Added objects to instruct Connection Admission Control to include framing overhead in the calculation of maximum cell rate of an ATM interface." REVISION "9903110000Z" DESCRIPTION "Clarified the description for some of the objects that they are applicable to logical port ATM interfaces too and made appropriate changes to the Compliance section." REVISION "9811240000Z" DESCRIPTION "Added a table to manage global resources on the Catalyst8540MSR platform. This was necessary because the Catalyst8540MSR, has 8 switching modules internally, with each switching module having its own independent cell memory. Each switching module performs per-VC queueing for a specific (fixed in hardware) group of ports, independent of any other switching module. The Lightstream 1010 had only one global cell memory for the entire device. " REVISION "9811030000Z" DESCRIPTION "Specify a range limiting Link Distance object." REVISION "9807260000Z" DESCRIPTION "Added an object to enable Hierarchical Scheduling." REVISION "9712030000Z" DESCRIPTION "Added object to configure Service Category support on an interface." REVISION "9705260000Z" DESCRIPTION "Added objects for management of new features made possible on the LS1010 by the Feature Card Plus. This includes support for per-VC queueing hardware structures, enhanced UPC, non-zero MCR for ABR, and UBR+." REVISION "9611110000Z" DESCRIPTION "Added objects for management of Cell Loss Ratio for CLP0+1 cell-streams. Added table for default tolerance." ::= { ciscoExperiment 10 }
ciscoAtmRmMIB OBJECT IDENTIFIER ::= { ciscoExperiment 10 }
Vendor: Cisco
Module: CISCO-ATM-RM-MIB
[Automatically extracted from oidview.com]
ciscoAtmRmMIB MODULE-IDENTITY LAST-UPDATED "200206030000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management." REVISION "200206030000Z" DESCRIPTION "Added objects to support Per Class Overbooking for ATM interfaces." REVISION "200101290000Z" DESCRIPTION "Added a table that contains objects to manage ATM Traffic Shaper configuration and state information for ATM interfaces." REVISION "9912220000Z" DESCRIPTION "Fix the errors in the definition of cgrPerVcqAtmRmGroup." REVISION "9907270000Z" DESCRIPTION "Added object to support overbooking of equivalent bandwidth of an ATM interface." REVISION "9904300000Z" DESCRIPTION " Added objects for the IMA interface support." REVISION "9904140000Z" DESCRIPTION "Added objects to instruct Connection Admission Control to include framing overhead in the calculation of maximum cell rate of an ATM interface." REVISION "9903110000Z" DESCRIPTION "Clarified the description for some of the objects that they are applicable to logical port ATM interfaces too and made appropriate changes to the Compliance section." REVISION "9811240000Z" DESCRIPTION "Added a table to manage global resources on the Catalyst8540MSR platform. This was necessary because the Catalyst8540MSR, has 8 switching modules internally, with each switching module having its own independent cell memory. Each switching module performs per-VC queueing for a specific (fixed in hardware) group of ports, independent of any other switching module. The Lightstream 1010 had only one global cell memory for the entire device. " REVISION "9811030000Z" DESCRIPTION "Specify a range limiting Link Distance object." REVISION "9807260000Z" DESCRIPTION "Added an object to enable Hierarchical Scheduling." REVISION "9712030000Z" DESCRIPTION "Added object to configure Service Category support on an interface." REVISION "9705260000Z" DESCRIPTION "Added objects for management of new features made possible on the LS1010 by the Feature Card Plus. This includes support for per-VC queueing hardware structures, enhanced UPC, non-zero MCR for ABR, and UBR+." REVISION "9611110000Z" DESCRIPTION "Added objects for management of Cell Loss Ratio for CLP0+1 cell-streams. Added table for default tolerance." ::= { ciscoExperiment 10 }
ciscoAtmRmMIB MODULE-IDENTITY LAST-UPDATED "200206030000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management." REVISION "200206030000Z" DESCRIPTION "Added objects to support Per Class Overbooking for ATM interfaces." REVISION "200101290000Z" DESCRIPTION "Added a table that contains objects to manage ATM Traffic Shaper configuration and state information for ATM interfaces." REVISION "9912220000Z" DESCRIPTION "Fix the errors in the definition of cgrPerVcqAtmRmGroup." REVISION "9907270000Z" DESCRIPTION "Added object to support overbooking of equivalent bandwidth of an ATM interface." REVISION "9904300000Z" DESCRIPTION " Added objects for the IMA interface support." REVISION "9904140000Z" DESCRIPTION "Added objects to instruct Connection Admission Control to include framing overhead in the calculation of maximum cell rate of an ATM interface." REVISION "9903110000Z" DESCRIPTION "Clarified the description for some of the objects that they are applicable to logical port ATM interfaces too and made appropriate changes to the Compliance section." REVISION "9811240000Z" DESCRIPTION "Added a table to manage global resources on the Catalyst8540MSR platform. This was necessary because the Catalyst8540MSR, has 8 switching modules internally, with each switching module having its own independent cell memory. Each switching module performs per-VC queueing for a specific (fixed in hardware) group of ports, independent of any other switching module. The Lightstream 1010 had only one global cell memory for the entire device. " REVISION "9811030000Z" DESCRIPTION "Specify a range limiting Link Distance object." REVISION "9807260000Z" DESCRIPTION "Added an object to enable Hierarchical Scheduling." REVISION "9712030000Z" DESCRIPTION "Added object to configure Service Category support on an interface." REVISION "9705260000Z" DESCRIPTION "Added objects for management of new features made possible on the LS1010 by the Feature Card Plus. This includes support for per-VC queueing hardware structures, enhanced UPC, non-zero MCR for ABR, and UBR+." REVISION "9611110000Z" DESCRIPTION "Added objects for management of Cell Loss Ratio for CLP0+1 cell-streams. Added table for default tolerance." ::= { ciscoExperiment 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | 10 | 171 | None |
1.3.6.1.4.1.9.10.10.3 | ciscoAtmRmMIBConformance | 2 | 39 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.10.2 | ciscoIpMRouteMIB | 3 | 68 | The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use. |
1.3.6.1.4.1.9.10.4 | ciscoMcastMIB | 2 | 58 | The MIB module for Cisco-specific management of IP Multicast in Cisco devices. |
1.3.6.1.4.1.9.10.6 | snaqllc01 | 2 | 51 | This is the MIB module for objects used to manage the QLLC protocol. |
1.3.6.1.4.1.9.10.8 | ciscoSnaLlcMIB | 3 | 159 | This is the MIB module for objects used to manage LLC devices. |
1.3.6.1.4.1.9.10.9 | ciscoDlswMIB | 3 | 242 | This MIB module contains objects to manage Data Link Switches. |
1.3.6.1.4.1.9.10.11 | ciscoAtmTrafficExtMIB | 2 | 20 | This MIB module is an extension to traffic OIDs and variables defined in rfc1695. |
1.3.6.1.4.1.9.10.12 | ciscoAtmAddrMIB | 2 | 10 | ATM address MIB |
1.3.6.1.4.1.9.10.13 | ciscoAtmConnMIB | 2 | 167 | This MIB module is a cisco extension to VPL/VCL table defined in rfc1695 for ATM switch connection management. |
1.3.6.1.4.1.9.10.14 | ciscoAtmIfMIB | 3 | 74 | A MIB module for an ATM interface configuration. |
1.3.6.1.4.1.9.10.15 | ciscoOamPingMIB | 3 | 47 | A MIB module for invoking OAM loopback Ping on ATM connections. |
1.3.6.1.4.1.9.10.16 | atmRmon | 3 | 130 | The MIB module for managing remote monitoring device implementations for ATM networks. |
1.3.6.1.4.1.9.10.17 | accountingControlMIB | 3 | 53 | The MIB module for managing the collection and storage of accounting information for connections in a connection- oriented networ… |
1.3.6.1.4.1.9.10.18 | atmAccountingInformationMIB | 1 | 72 | The MIB module for identifying items of accounting information which are applicable to ATM connections. |
1.3.6.1.4.1.9.10.19 | ciscoPopMgmtMIB | 3 | 167 | Cisco Point Of Presence Management MIB to provide DSX1 and DSX0 facilities management and call summaries. |
1.3.6.1.4.1.9.10.22 | expressionMIB | 2 | 67 | The MIB module for defining expressions of MIB objects for network management purposes. This MIB is an early snapshot of work don… |
1.3.6.1.4.1.9.10.23 | ciscoAtm2MIB | 2 | 49 | This MIB Module is a supplement to the ATM-MIB [1]. It is an adaptation of a portion of the ATOMMIB supplemental MIB. |
1.3.6.1.4.1.9.10.24 | ciscoVpdnMgmtMIB | 3 | 188 | The MIB module for VPDN. Overview of VPDN MIB MIB description This MIB is to support the Virtual Private Dialup Network (VPDN) feat… |
1.3.6.1.4.1.9.10.25 | ciscoDialControlMib | 2 | 44 | The MIB module to describe call history information for demand access and possibly other kinds of interfaces. |
1.3.6.1.4.1.9.10.26 | cisco6200MIB | 2 | 129 | This MIB provides CISCO 6200 product information It is structured as following groups: system - not part of indices, defines syst… |
1.3.6.1.4.1.9.10.27 | cisco6400ChassisMIB | 3 | 101 | Add nrpSwitchoverAlarm, nrpSecondaryFailureAlarm, nrpSecondaryRemovedAlarm, and nrpMismatchAlarm. |
1.3.6.1.4.1.9.10.28 | cisco5800HealthMonMIB | 4 | 54 | This MIB provides a means to monitor the status of a system's health. |
1.3.6.1.4.1.9.10.29 | ciscoIetfAtm2PvctrapMIB | 3 | 21 | This MIB Module is a supplement to the ATM-MIB. |
1.3.6.1.4.1.9.10.30 | ciscoDslProvisionMIB | 3 | 140 | Cisco DSL (Digital Subscriber Line) Provision MIB Module. It is used to create subscriber PPP over ATM sessions and related tasks. |
1.3.6.1.4.1.9.10.31 | ciscoC12000IfHcCountersMIB | 3 | 17 | A MIB module to describe and store IF-MIB High Capacity (ie 64 bit) Counters as two 32 bit objects. This mib will ONLY be support… |
1.3.6.1.4.1.9.10.32 | ds0Bundle | 3 | 12 | The MIB module to describe DS0 Bundle interfaces objects. Note: This contains a subset of the MIB objects defined in DS0BUNDLE-MIB… |
1.3.6.1.4.1.9.10.33 | ciscoDs0BundleExtMIB | 2 | 18 | The MIB module for managing DS0 Bundles. This MIB contains additional objects to supplement the the IETF draft ds0Bundle MIB. |
1.3.6.1.4.1.9.10.35 | ciscoVoiceAtmDialControlMIB | 3 | 52 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing ATM management information over a data network. |
1.3.6.1.4.1.9.10.36 | ciscoVoiceFrDialControlMIB | 2 | 13 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing FR management information over a data network. |
1.3.6.1.4.1.9.10.37 | ciscoVoiceHdlcDialControlMIB | 2 | 12 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing HDLC management information over a data network. |
1.3.6.1.4.1.9.10.39 | ciscoCacheEngineMIB | 3 | 389 | The MIB module for the Cisco Cache Engine from Cisco Systems, Inc. |
1.3.6.1.4.1.9.10.40 | ciscoGatekeeperMIB | 3 | 167 | The MIB Module supports the functions of a gatekeeper. The gatekeeper is a function of the H.323 Packet Based Multimedia Communi… |
1.3.6.1.4.1.9.10.41 | ciscoH323TCMIB | 0 | 0 | The MIB Module defines a common set of Textual Conventions used in mib modules supporting ITU-T H.323.0 and ITU-T H.225.0 Recomme… |
1.3.6.1.4.1.9.10.43 | ciscoCNOSwitchMIB | 3 | 48 | The MIB module for the management of Cisco Network Office (CNO) switch products. |
1.3.6.1.4.1.9.10.44 | ciscoSibuStackableDualSpeedHubMIB | 3 | 53 | The MIB module that extends the REPEATER-MIB to manage CISCO low end stackable repeater products. For the purpose of this mib, a … |
1.3.6.1.4.1.9.10.45 | ciscoSibuFlashMIB | 3 | 23 | The MIB module that provides a simple mechanism to support firmware upgrade on Cisco low end devices. |
1.3.6.1.4.1.9.10.46 | ciscoSibuManagersMIB | 3 | 44 | The MIB module that provides a simple configuration of management interfaces on managed devices. |
1.3.6.1.4.1.9.10.48 | ciscoGprsGtpMIB | 3 | 108 | The MIB Module for managing the General Packet Radio Service(GPRS) Tunnelling Protocol(GTP) on Gateway GPRS Support Node (GGSN) a… |
1.3.6.1.4.1.9.10.51 | ciscoVpdnMgmtExtMIB | 3 | 49 | Cisco VPDN management MIB extension Module. This MIB is a supplement to CISCO-VPDN-MGMT-MIB.my. The main enhancements are: 1. Add… |
1.3.6.1.4.1.9.10.52 | ciscoWirelessExpMIB | 2 | 72 | This is the MIB Module for the Cisco Wireless Radio Point to Point experimental components. Glossary The following terms are used … |
1.3.6.1.4.1.9.10.53 | ciscoVoiceEnabledLinkMIB | 3 | 20 | This MIB module provides information about Voice Enabled ATM and Frame Relay Links used by the Cisco Switched voice protocol. The … |
1.3.6.1.4.1.9.10.55 | ciscoVoiceCommonDialControlMIB | 3 | 30 | This MIB module contains voice related objects that are common across more than one network encapsulation i.e VoIP, VoATM and VoF… |
1.3.6.1.4.1.9.10.56 | ciscoAAAServerMIB | 3 | 56 | The MIB module for monitoring communications and status of AAA Server operation |
1.3.6.1.4.1.9.10.57 | ciscoProxyControlMIB | 3 | 67 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing Proxy management information. *** ABBREVIATIONS, ACRONY… |
1.3.6.1.4.1.9.10.59 | ciscoDocsRemoteQueryMIB | 3 | 35 | This MIB module provides the management of the Cisco Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, im… |
1.3.6.1.4.1.9.10.60 | ciscosrpMIB | 6 | 198 | The MIB module to describe objects for Spatial Reuse Protocol (SRP) interface layer. |
... |