This is the MIB Module for the Cisco Wireless Radio
Point to Point experimental components.
Glossary
The following terms are used in the MIB definitions below.
Radio Card: The line card that provides the wireless
communication features.
Radio Link: The bi-directional wireless link that exists
between two communicating radio cards.
Radio PHY: Represents the transmission characteristics of the
Radio Link.
RF Unit: The Radio Frequency components and the associated antennas.
Radio System: Radio card and RF unit(s).
Cisco Wireless Radio Experimental MIB Organization
The Cisco Wireless Radio Experimental MIB provides the following
management groups :
When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency
Group will be moved into that MIB.
When the CISCO-IMAGE-MIB.my gets updated to include the image
capabilities, the Image Group will be migrated into that MIB.
When the CISCO-LED-MIB.my becomes available and supports the
functionality the LED group needs, the LED group will be
migrated into that.
o. Radio Frequency Resource Group
This contains information about the Radio frequency
transmission and reception resources available on the
system. This group determines the portions of the
radio spectrum at which the radio subsystem can
operate.
This group in conjunction with the radio PHY group
determine the acutal spectrum that gets used for
communications.
o. Image Group
This provides facilities to manage radio line card's
firmware image file URL's in router's image repository.
It also provides access to the image details.
o. LED Group
This group provides information about LEDs available
on the line card.
o. Duplexor Group
This group provides information about the Duplexors
installed in the RF resources.
Parsed from file CISCO-WIRELESS-EXP-MIB.mib
Module: CISCO-WIRELESS-EXP-MIB
This is the MIB Module for the Cisco Wireless Radio
Point to Point experimental components.
Glossary
The following terms are used in the MIB definitions below.
Radio Card: The line card that provides the wireless
communication features.
Radio Link: The bi-directional wireless link that exists
between two communicating radio cards.
Radio PHY: Represents the transmission characteristics of the
Radio Link.
RF Unit: The Radio Frequency components and the associated antennas.
Radio System: Radio card and RF unit(s).
Cisco Wireless Radio Experimental MIB Organization
The Cisco Wireless Radio Experimental MIB provides the following
management groups :
When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency
Group will be moved into that MIB.
When the CISCO-IMAGE-MIB.my gets updated to include the image
capabilities, the Image Group will be migrated into that MIB.
When the CISCO-LED-MIB.my becomes available and supports the
functionality the LED group needs, the LED group will be
migrated into that.
o. Radio Frequency Resource Group
This contains information about the Radio frequency
transmission and reception resources available on the
system. This group determines the portions of the
radio spectrum at which the radio subsystem can
operate.
This group in conjunction with the radio PHY group
determine the acutal spectrum that gets used for
communications.
o. Image Group
This provides facilities to manage radio line card's
firmware image file URL's in router's image repository.
It also provides access to the image details.
o. LED Group
This group provides information about LEDs available
on the line card.
o. Duplexor Group
This group provides information about the Duplexors
installed in the RF resources.
Parsed from file CISCO-WIRELESS-EXP-MIB.my.txt
Company: None
Module: CISCO-WIRELESS-EXP-MIB
This is the MIB Module for the Cisco Wireless Radio
Point to Point experimental components.
Glossary
The following terms are used in the MIB definitions below.
Radio Card: The line card that provides the wireless
communication features.
Radio Link: The bi-directional wireless link that exists
between two communicating radio cards.
Radio PHY: Represents the transmission characteristics of the
Radio Link.
RF Unit: The Radio Frequency components and the associated antennas.
Radio System: Radio card and RF unit(s).
Cisco Wireless Radio Experimental MIB Organization
The Cisco Wireless Radio Experimental MIB provides the following
management groups :
When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency
Group will be moved into that MIB.
When the CISCO-IMAGE-MIB.my gets updated to include the image
capabilities, the Image Group will be migrated into that MIB.
When the CISCO-LED-MIB.my becomes available and supports the
functionality the LED group needs, the LED group will be
migrated into that.
o. Radio Frequency Resource Group
This contains information about the Radio frequency
transmission and reception resources available on the
system. This group determines the portions of the
radio spectrum at which the radio subsystem can
operate.
This group in conjunction with the radio PHY group
determine the acutal spectrum that gets used for
communications.
o. Image Group
This provides facilities to manage radio line card's
firmware image file URL's in router's image repository.
It also provides access to the image details.
o. LED Group
This group provides information about LEDs available
on the line card.
o. Duplexor Group
This group provides information about the Duplexors
installed in the RF resources.
ciscoWirelessExpMIB MODULE-IDENTITY LAST-UPDATED "200512271003Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB Module for the Cisco Wireless Radio Point to Point experimental components. Glossary The following terms are used in the MIB definitions below. Radio Card: The line card that provides the wireless communication features. Radio Link: The bi-directional wireless link that exists between two communicating radio cards. Radio PHY: Represents the transmission characteristics of the Radio Link. RF Unit: The Radio Frequency components and the associated antennas. Radio System: Radio card and RF unit(s). Cisco Wireless Radio Experimental MIB Organization The Cisco Wireless Radio Experimental MIB provides the following management groups : When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency Group will be moved into that MIB. When the CISCO-IMAGE-MIB.my gets updated to include the image capabilities, the Image Group will be migrated into that MIB. When the CISCO-LED-MIB.my becomes available and supports the functionality the LED group needs, the LED group will be migrated into that. o. Radio Frequency Resource Group This contains information about the Radio frequency transmission and reception resources available on the system. This group determines the portions of the radio spectrum at which the radio subsystem can operate. This group in conjunction with the radio PHY group determine the acutal spectrum that gets used for communications. o. Image Group This provides facilities to manage radio line card's firmware image file URL's in router's image repository. It also provides access to the image details. o. LED Group This group provides information about LEDs available on the line card. o. Duplexor Group This group provides information about the Duplexors installed in the RF resources." REVISION "200512271003Z" DESCRIPTION "Imported Unsigned32 from SNMPv2-SMI." REVISION "9905132010Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoExperiment 52 }
ciscoWirelessExpMIB OBJECT IDENTIFIER ::= { ciscoExperiment 52 }
Vendor: Cisco
Module: CISCO-WIRELESS-EXP-MIB
[Automatically extracted from oidview.com]
ciscoWirelessExpMIB MODULE-IDENTITY LAST-UPDATED "200512271003Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB Module for the Cisco Wireless Radio Point to Point experimental components. Glossary The following terms are used in the MIB definitions below. Radio Card: The line card that provides the wireless communication features. Radio Link: The bi-directional wireless link that exists between two communicating radio cards. Radio PHY: Represents the transmission characteristics of the Radio Link. RF Unit: The Radio Frequency components and the associated antennas. Radio System: Radio card and RF unit(s). Cisco Wireless Radio Experimental MIB Organization The Cisco Wireless Radio Experimental MIB provides the following management groups : When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency Group will be moved into that MIB. When the CISCO-IMAGE-MIB.my gets updated to include the image capabilities, the Image Group will be migrated into that MIB. When the CISCO-LED-MIB.my becomes available and supports the functionality the LED group needs, the LED group will be migrated into that. o. Radio Frequency Resource Group This contains information about the Radio frequency transmission and reception resources available on the system. This group determines the portions of the radio spectrum at which the radio subsystem can operate. This group in conjunction with the radio PHY group determine the acutal spectrum that gets used for communications. o. Image Group This provides facilities to manage radio line card's firmware image file URL's in router's image repository. It also provides access to the image details. o. LED Group This group provides information about LEDs available on the line card. o. Duplexor Group This group provides information about the Duplexors installed in the RF resources." REVISION "200512271003Z" DESCRIPTION "Imported Unsigned32 from SNMPv2-SMI." REVISION "9905132010Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoExperiment 52 }
ciscoWirelessExpMIB MODULE-IDENTITY LAST-UPDATED "200512271003Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB Module for the Cisco Wireless Radio Point to Point experimental components. Glossary The following terms are used in the MIB definitions below. Radio Card: The line card that provides the wireless communication features. Radio Link: The bi-directional wireless link that exists between two communicating radio cards. Radio PHY: Represents the transmission characteristics of the Radio Link. RF Unit: The Radio Frequency components and the associated antennas. Radio System: Radio card and RF unit(s). Cisco Wireless Radio Experimental MIB Organization The Cisco Wireless Radio Experimental MIB provides the following management groups : When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency Group will be moved into that MIB. When the CISCO-IMAGE-MIB.my gets updated to include the image capabilities, the Image Group will be migrated into that MIB. When the CISCO-LED-MIB.my becomes available and supports the functionality the LED group needs, the LED group will be migrated into that. o. Radio Frequency Resource Group This contains information about the Radio frequency transmission and reception resources available on the system. This group determines the portions of the radio spectrum at which the radio subsystem can operate. This group in conjunction with the radio PHY group determine the acutal spectrum that gets used for communications. o. Image Group This provides facilities to manage radio line card's firmware image file URL's in router's image repository. It also provides access to the image details. o. LED Group This group provides information about LEDs available on the line card. o. Duplexor Group This group provides information about the Duplexors installed in the RF resources." REVISION "200512271003Z" DESCRIPTION "Imported Unsigned32 from SNMPv2-SMI." REVISION "9905132010Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoExperiment 52 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.52.1 | cwrRadioExpMibObjects | 4 | 63 | None |
| 1.3.6.1.4.1.9.10.52.2 | cwrRadioExpConformance | 2 | 7 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.10.2 | ciscoIpMRouteMIB | 3 | 68 | The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use. |
| 1.3.6.1.4.1.9.10.4 | ciscoMcastMIB | 2 | 58 | The MIB module for Cisco-specific management of IP Multicast in Cisco devices. |
| 1.3.6.1.4.1.9.10.6 | snaqllc01 | 2 | 51 | This is the MIB module for objects used to manage the QLLC protocol. |
| 1.3.6.1.4.1.9.10.8 | ciscoSnaLlcMIB | 3 | 159 | This is the MIB module for objects used to manage LLC devices. |
| 1.3.6.1.4.1.9.10.9 | ciscoDlswMIB | 3 | 242 | This MIB module contains objects to manage Data Link Switches. |
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | 2 | 212 | The MIB module which complements standard ATM MIBs for Cisco devices, for Resource Management. |
| 1.3.6.1.4.1.9.10.11 | ciscoAtmTrafficExtMIB | 2 | 20 | This MIB module is an extension to traffic OIDs and variables defined in rfc1695. |
| 1.3.6.1.4.1.9.10.12 | ciscoAtmAddrMIB | 2 | 10 | ATM address MIB |
| 1.3.6.1.4.1.9.10.13 | ciscoAtmConnMIB | 2 | 167 | This MIB module is a cisco extension to VPL/VCL table defined in rfc1695 for ATM switch connection management. |
| 1.3.6.1.4.1.9.10.14 | ciscoAtmIfMIB | 3 | 74 | A MIB module for an ATM interface configuration. |
| 1.3.6.1.4.1.9.10.15 | ciscoOamPingMIB | 3 | 47 | A MIB module for invoking OAM loopback Ping on ATM connections. |
| 1.3.6.1.4.1.9.10.16 | atmRmon | 3 | 130 | The MIB module for managing remote monitoring device implementations for ATM networks. |
| 1.3.6.1.4.1.9.10.17 | accountingControlMIB | 3 | 53 | The MIB module for managing the collection and storage of accounting information for connections in a connection- oriented networ… |
| 1.3.6.1.4.1.9.10.18 | atmAccountingInformationMIB | 1 | 72 | The MIB module for identifying items of accounting information which are applicable to ATM connections. |
| 1.3.6.1.4.1.9.10.19 | ciscoPopMgmtMIB | 3 | 167 | Cisco Point Of Presence Management MIB to provide DSX1 and DSX0 facilities management and call summaries. |
| 1.3.6.1.4.1.9.10.22 | expressionMIB | 2 | 67 | The MIB module for defining expressions of MIB objects for network management purposes. This MIB is an early snapshot of work don… |
| 1.3.6.1.4.1.9.10.23 | ciscoAtm2MIB | 2 | 49 | This MIB Module is a supplement to the ATM-MIB [1]. It is an adaptation of a portion of the ATOMMIB supplemental MIB. |
| 1.3.6.1.4.1.9.10.24 | ciscoVpdnMgmtMIB | 3 | 188 | The MIB module for VPDN. Overview of VPDN MIB MIB description This MIB is to support the Virtual Private Dialup Network (VPDN) feat… |
| 1.3.6.1.4.1.9.10.25 | ciscoDialControlMib | 2 | 44 | The MIB module to describe call history information for demand access and possibly other kinds of interfaces. |
| 1.3.6.1.4.1.9.10.26 | cisco6200MIB | 2 | 129 | This MIB provides CISCO 6200 product information It is structured as following groups: system - not part of indices, defines syst… |
| 1.3.6.1.4.1.9.10.27 | cisco6400ChassisMIB | 3 | 101 | Add nrpSwitchoverAlarm, nrpSecondaryFailureAlarm, nrpSecondaryRemovedAlarm, and nrpMismatchAlarm. |
| 1.3.6.1.4.1.9.10.28 | cisco5800HealthMonMIB | 4 | 54 | This MIB provides a means to monitor the status of a system's health. |
| 1.3.6.1.4.1.9.10.29 | ciscoIetfAtm2PvctrapMIB | 3 | 21 | This MIB Module is a supplement to the ATM-MIB. |
| 1.3.6.1.4.1.9.10.30 | ciscoDslProvisionMIB | 3 | 140 | Cisco DSL (Digital Subscriber Line) Provision MIB Module. It is used to create subscriber PPP over ATM sessions and related tasks. |
| 1.3.6.1.4.1.9.10.31 | ciscoC12000IfHcCountersMIB | 3 | 17 | A MIB module to describe and store IF-MIB High Capacity (ie 64 bit) Counters as two 32 bit objects. This mib will ONLY be support… |
| 1.3.6.1.4.1.9.10.32 | ds0Bundle | 3 | 12 | The MIB module to describe DS0 Bundle interfaces objects. Note: This contains a subset of the MIB objects defined in DS0BUNDLE-MIB… |
| 1.3.6.1.4.1.9.10.33 | ciscoDs0BundleExtMIB | 2 | 18 | The MIB module for managing DS0 Bundles. This MIB contains additional objects to supplement the the IETF draft ds0Bundle MIB. |
| 1.3.6.1.4.1.9.10.35 | ciscoVoiceAtmDialControlMIB | 3 | 52 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing ATM management information over a data network. |
| 1.3.6.1.4.1.9.10.36 | ciscoVoiceFrDialControlMIB | 2 | 13 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing FR management information over a data network. |
| 1.3.6.1.4.1.9.10.37 | ciscoVoiceHdlcDialControlMIB | 2 | 12 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing HDLC management information over a data network. |
| 1.3.6.1.4.1.9.10.39 | ciscoCacheEngineMIB | 3 | 389 | The MIB module for the Cisco Cache Engine from Cisco Systems, Inc. |
| 1.3.6.1.4.1.9.10.40 | ciscoGatekeeperMIB | 3 | 167 | The MIB Module supports the functions of a gatekeeper. The gatekeeper is a function of the H.323 Packet Based Multimedia Communi… |
| 1.3.6.1.4.1.9.10.41 | ciscoH323TCMIB | 0 | 0 | The MIB Module defines a common set of Textual Conventions used in mib modules supporting ITU-T H.323.0 and ITU-T H.225.0 Recomme… |
| 1.3.6.1.4.1.9.10.43 | ciscoCNOSwitchMIB | 3 | 48 | The MIB module for the management of Cisco Network Office (CNO) switch products. |
| 1.3.6.1.4.1.9.10.44 | ciscoSibuStackableDualSpeedHubMIB | 3 | 53 | The MIB module that extends the REPEATER-MIB to manage CISCO low end stackable repeater products. For the purpose of this mib, a … |
| 1.3.6.1.4.1.9.10.45 | ciscoSibuFlashMIB | 3 | 23 | The MIB module that provides a simple mechanism to support firmware upgrade on Cisco low end devices. |
| 1.3.6.1.4.1.9.10.46 | ciscoSibuManagersMIB | 3 | 44 | The MIB module that provides a simple configuration of management interfaces on managed devices. |
| 1.3.6.1.4.1.9.10.48 | ciscoGprsGtpMIB | 3 | 108 | The MIB Module for managing the General Packet Radio Service(GPRS) Tunnelling Protocol(GTP) on Gateway GPRS Support Node (GGSN) a… |
| 1.3.6.1.4.1.9.10.51 | ciscoVpdnMgmtExtMIB | 3 | 49 | Cisco VPDN management MIB extension Module. This MIB is a supplement to CISCO-VPDN-MGMT-MIB.my. The main enhancements are: 1. Add… |
| 1.3.6.1.4.1.9.10.53 | ciscoVoiceEnabledLinkMIB | 3 | 20 | This MIB module provides information about Voice Enabled ATM and Frame Relay Links used by the Cisco Switched voice protocol. The … |
| 1.3.6.1.4.1.9.10.55 | ciscoVoiceCommonDialControlMIB | 3 | 30 | This MIB module contains voice related objects that are common across more than one network encapsulation i.e VoIP, VoATM and VoF… |
| 1.3.6.1.4.1.9.10.56 | ciscoAAAServerMIB | 3 | 56 | The MIB module for monitoring communications and status of AAA Server operation |
| 1.3.6.1.4.1.9.10.57 | ciscoProxyControlMIB | 3 | 67 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing Proxy management information. *** ABBREVIATIONS, ACRONY… |
| 1.3.6.1.4.1.9.10.59 | ciscoDocsRemoteQueryMIB | 3 | 35 | This MIB module provides the management of the Cisco Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, im… |
| 1.3.6.1.4.1.9.10.60 | ciscosrpMIB | 6 | 198 | The MIB module to describe objects for Spatial Reuse Protocol (SRP) interface layer. |
| 1.3.6.1.4.1.9.10.62 | ciscoIPsecMIB | 3 | 110 | The MIB module for modeling Cisco-specific IPsec attributes Overview of Cisco IPsec MIB MIB description This MIB models the Cisco… |
| 1.3.6.1.4.1.9.10.65 | mplsLdpMIB | 3 | 240 | This MIB contains managed object definitions for the Multiprotocol Label Switching, Label Distribution Protocol, LDP, as defined … |
| 1.3.6.1.4.1.9.10.66 | ciscoOpticalIfExtnMIB | 2 | 43 | A MIB module containing extensions to the IF-MIB for optical interfaces. |
| 1.3.6.1.4.1.9.10.67 | ciscoOpticalPatchMIB | 3 | 38 | This MIB module is used to configure and monitor the network element view of optical patches between two ports or fibers on the s… |
| 1.3.6.1.4.1.9.10.68 | ciscoOpticalIfCrossConnectMIB | 2 | 33 | This MIB module is used to create and monitor cross-connects (horizontal relationships) between peer interfaces on the same netwo… |
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | 2 | 63 | This MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol spec… |
| 1.3.6.1.4.1.9.10.71 | cApsMIB | 3 | 74 | This management information module supports the configuration and management of SONET linear APS groups. The definitions and desc… |
| 1.3.6.1.4.1.9.10.72 | cApsExtMIB | 2 | 53 | The Cisco APS Extension MIB extends the Cisco APS MIB in order to a) support path APS architectures and b) support interfaces oth… |
| 1.3.6.1.4.1.9.10.73 | ciscoSpMIB | 3 | 453 | The MIB for managing the SS7 Signalling Point (SP) implemented in the Cisco IOS SS7 offload product. The relevant ITU documents … |
| 1.3.6.1.4.1.9.10.74 | ceSctpMIB | 2 | 135 | The MIB module for managing SCTP implementation. |
| 1.3.6.1.4.1.9.10.75 | cSctpMIB | 2 | 108 | The MIB module for managing SCTP protocol (RFC 2960). |
| 1.3.6.1.4.1.9.10.76 | cSctpExtMIB | 3 | 64 | An extension to the CISCO-IETF-SCTP-MIB.my used to provide additional information to manage the Stream Control Transmission Prot… |
| 1.3.6.1.4.1.9.10.77 | ciscoIetfNatMIB | 3 | 130 | This MIB module defines the generic managed objects for NAT. |
| 1.3.6.1.4.1.9.10.83 | ciscoOpticalMonitoringMIB | 3 | 19 | This MIB module is used to monitor optical parameters of a network element.This MIB deals with the operating parameters of the op… |
| 1.3.6.1.4.1.9.10.84 | ciscoRpmsMIB | 3 | 66 | This MIB contains objects pertinent to a Resource Policy Management System (RPMS) server. RPMS is a key component of Cisco Any S… |
| 1.3.6.1.4.1.9.10.85 | ciscoIetfIpForward | 8 | 71 | The MIB module for the management of CIDR multipath IP Routes. |
| 1.3.6.1.4.1.9.10.86 | ciscoIetfIpMIB | 2 | 87 | The MIB module for managing IP and ICMP implementations, but excluding the management of IP routes. |
| 1.3.6.1.4.1.9.10.87 | ciscoIetfVdslMIB | 1 | 91 | The MIB module defining objects for the management of a pair of VDSL modems at each end of the VDSL line. Each VDSL line has an … |
| 1.3.6.1.4.1.9.10.88 | ciscoCdlMIB | 3 | 58 | This MIB module defines objects to manage Converged Data Link (CDL). CDL provides OAM&P (Operation, Administration, Maintenance a… |
| 1.3.6.1.4.1.9.10.89 | ciscoIetfDot11QosMIB | 2 | 43 | This MIB module provides network management support for QoS on wireless LAN devices. All objects defined in this MIB are listed (… |
| 1.3.6.1.4.1.9.10.90 | ciscoIetfDot11QosExtMIB | 3 | 29 | This MIB module provides network management support for QoS on IEEE 802.11 wireless LAN devices. This MIB is an extension to QoS … |
| 1.3.6.1.4.1.9.10.91 | cEventMgrMIB | 3 | 51 | None |
| 1.3.6.1.4.1.9.10.93 | ciscoHcAlarmMIB | 3 | 37 | This module defines Remote Monitoring MIB extensions for High Capacity Alarms. |
| 1.3.6.1.4.1.9.10.94 | ciscoIscsiModule | 3 | 207 | The iSCSI Protocol MIB module. |
| 1.3.6.1.4.1.9.10.95 | ciscoScsiMIB | 3 | 169 | The Cisco version of the SCSI MIB draft draft-ietf-ips-scsi-mib-03.txt from the IETF. |
| 1.3.6.1.4.1.9.10.96 | ciscoFcipMgmtMIB | 2 | 78 | The Fibre Channel Over TCP/IP management MIB module. This mib module is the Cisco version of the FCIP MIB draft , draft-ietf-ips-… |
| 1.3.6.1.4.1.9.10.97 | ciscoAtmPvcTrapExtnMIB | 3 | 201 | This MIB Module is a supplement to the CISCO-IETF-ATM2-PVCTRAP-MIB. |
| 1.3.6.1.4.1.9.10.98 | cmplsFrrMIB | 4 | 81 | This MIB module contains managed object definitions for MPLS Fast Reroute (FRR) as defined in:Pan, P., Gan, D., Swallow, G., Vass… |
| 1.3.6.1.4.1.9.10.99 | cospf | 11 | 105 | An extension to the MIB module defined in RFC 1850 for managing OSPF implimentation. Most of the MIB definitions are based on the … |
| 1.3.6.1.4.1.9.10.101 | ciscoOspfTrapMIB | 3 | 33 | ciscoOspftrapMIB |
| 1.3.6.1.4.1.9.10.102 | ciscoIetfDhcpSrvMIB | 3 | 148 | The MIB module for entities implementing the server side of the Bootstrap Protocol (BOOTP) and the Dynamic Host Configuration pro… |
| ... | ||||