When a media gateway is powered on, it should initiate
a restart timer to a random value, uniformly distributed
between 0 and the value specified in this object (the
maximum waiting delay, MWD). After restart timer timeout,
the media gateway can initiate the ServiceChange
transaction. This is a way to prevent the MGC is swamped
by many gateways powered up at the same time.
Parsed from file CISCO-MEGACO-EXT-MIB.mib
Module: CISCO-MEGACO-EXT-MIB
When a media gateway is powered on, it should initiate
a restart timer to a random value, uniformly distributed
between 0 and the value specified in this object (the
maximum waiting delay, MWD). After restart timer timeout,
the media gateway can initiate the ServiceChange
transaction. This is a way to prevent the MGC is swamped
by many gateways powered up at the same time.
When a media gateway is powered on, it should initiate
a restart timer to a random value, uniformly distributed
between 0 and the value specified in this object (the
maximum waiting delay, MWD). After restart timer timeout,
the media gateway can initiate the ServiceChange
transaction. This is a way to prevent the MGC is swamped
by many gateways powered up at the same time.
Parsed from file CISCO-MEGACO-EXT-MIB.my.txt
Company: None
Module: CISCO-MEGACO-EXT-MIB
When a media gateway is powered on, it should initiate
a restart timer to a random value, uniformly distributed
between 0 and the value specified in this object (the
maximum waiting delay, MWD). After restart timer timeout,
the media gateway can initiate the ServiceChange
transaction. This is a way to prevent the MGC is swamped
by many gateways powered up at the same time.
cmedxGatewayMaxWaitingDelay OBJECT-TYPE SYNTAX Unsigned32 (0..600000 ) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the value specified in this object (the maximum waiting delay, MWD). After restart timer timeout, the media gateway can initiate the ServiceChange transaction. This is a way to prevent the MGC is swamped by many gateways powered up at the same time." DEFVAL { 3000 } ::= { cmedxGatewayConfigEntry 10 }
cmedxGatewayMaxWaitingDelay OBJECT-TYPE SYNTAX Gauge(0..600000) ACCESS read-write STATUS mandatory DESCRIPTION "When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the value specified in this object (the maximum waiting delay, MWD). After restart timer timeout, the media gateway can initiate the ServiceChange transaction. This is a way to prevent the MGC is swamped by many gateways powered up at the same time." DEFVAL { 3000 } ::= { cmedxGatewayConfigEntry 10 }
Vendor: Cisco
Module: CISCO-MEGACO-EXT-MIB
[Automatically extracted from oidview.com]
cmedxGatewayMaxWaitingDelay OBJECT-TYPE SYNTAX Unsigned32 (0..600000 ) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the value specified in this object (the maximum waiting delay, MWD). After restart timer timeout, the media gateway can initiate the ServiceChange transaction. This is a way to prevent the MGC is swamped by many gateways powered up at the same time." DEFVAL { 3000 } ::= { cmedxGatewayConfigEntry 10 }
cmedxGatewayMaxWaitingDelay OBJECT-TYPE SYNTAX Unsigned32 (0..600000 ) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the value specified in this object (the maximum waiting delay, MWD). After restart timer timeout, the media gateway can initiate the ServiceChange transaction. This is a way to prevent the MGC is swamped by many gateways powered up at the same time." DEFVAL { 3000 } ::= { cmedxGatewayConfigEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.104.1.1.1.1.1 | cmedxGatewayMgcGroupIndex | 0 | 0 | This object specifies the MGC group parameters associated with MGC group index. Those parameters are for the communication betwee… |
1.3.6.1.4.1.9.10.104.1.1.1.1.2 | cmedxGatewayIpAddressIndex | 0 | 0 | This object specifies the media gateway IP address. It is the index of the entry in cMediaGwIpConfigTable which defines the media… |
1.3.6.1.4.1.9.10.104.1.1.1.1.3 | cmedxGatewayAssociationId | 0 | 0 | This object indicates the unique identification of the H.248 association assigned by the H.248 Stack. |
1.3.6.1.4.1.9.10.104.1.1.1.1.4 | cmedxGatewayMaxContexts | 0 | 0 | Maximum number of contexts is allowed in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.5 | cmedxGatewayMaxTermsInContext | 0 | 0 | Maximum number of terminations per context in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.6 | cmedxGatewayMgExecTime | 0 | 0 | This object specifies the interval within which the MGC expects a response to any transaction from the MG (exclusive of network d… |
1.3.6.1.4.1.9.10.104.1.1.1.1.7 | cmedxGatewayMgcExecTime | 0 | 0 | This object specifies the interval within which the MG should expects a response to any transaction from the MGC (exclusive of ne… |
1.3.6.1.4.1.9.10.104.1.1.1.1.8 | cmedxGatewayProvisionRespTime | 0 | 0 | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gatewa… |
1.3.6.1.4.1.9.10.104.1.1.1.1.9 | cmedxGatewayNumConnRetries | 0 | 0 | The number of times the media gateway retries to connect to MGC before it sends out disconnect command. |
1.3.6.1.4.1.9.10.104.1.1.1.1.11 | cmedxGatewayRestartDelay | 0 | 0 | This object specifies The time delay before the media gateway accept any call from MGC after it sends the command 'ServiceChange'… |
1.3.6.1.4.1.9.10.104.1.1.1.1.12 | cmedxGatewayRespRetentionTime | 0 | 0 | This object specifies the time till which the responses should be retained before they are sent if they receive a repetition of a… |
1.3.6.1.4.1.9.10.104.1.1.1.1.13 | cmedxGatewayInitialRtt | 0 | 0 | Initial round-trip time for the H.248 transaction to be responded. It reflects the network delay time. |
1.3.6.1.4.1.9.10.104.1.1.1.1.14 | cmedxGatewayInactivityTime | 0 | 0 | This object specifies the the period of silence between messages from MGC. If the period of silence exceeds the value of this obj… |
1.3.6.1.4.1.9.10.104.1.1.1.1.15 | cmedxGatewayHeaderAddrType | 0 | 0 | The address type in the H.248 message header. |
1.3.6.1.4.1.9.10.104.1.1.1.1.16 | cmedxGatewayDownServiceDelay | 0 | 0 | This object specifies the grace period before the media gateway link to be taken out of service. The value of 0 means to take the… |
1.3.6.1.4.1.9.10.104.1.1.1.1.17 | cmedxGatewayActiveMgcAddress | 0 | 0 | The address of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.18 | cmedxGatewayActiveMgcDomain | 0 | 0 | The domain name of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.19 | cmedxGatewayActiveMgcPortNum | 0 | 0 | The transport layer port number of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.20 | cmedxGatewayStateChangeReason | 0 | 0 | This object indicates the reason for the operational state change (cmedGatewayOperStatus) in the media gateway link. mgcDirected … |
1.3.6.1.4.1.9.10.104.1.1.1.1.21 | cmedxGatewayStateChangeMethod | 0 | 0 | This object indicates the method for the operational state change (cmedGatewayOperStatus) in the media gateway link. other (1)… |
1.3.6.1.4.1.9.10.104.1.1.1.1.22 | cmedxGatewayAdminAction | 0 | 0 | This object specifies the action that users used to change the service state of the media gateway link. This object can be modifi… |
1.3.6.1.4.1.9.10.104.1.1.1.1.23 | cmedxGatewayServiceState | 0 | 0 | This object indicates current operation status of the media gateway link. inService (1) - The media gateway link is in-service… |
1.3.6.1.4.1.9.10.104.1.1.1.1.24 | cmedxGatewayDynamicTpktVersion | 0 | 0 | This object specifies the TPKT header version that is dynamically assigned based on the size of the packet presented to TCP layer… |
1.3.6.1.4.1.9.10.104.1.1.1.1.25 | cmedxGatewayMaxCommandMsgSize | 0 | 0 | This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated… |
1.3.6.1.4.1.9.10.104.1.1.1.1.26 | cmedxGatewayMaxReplyMsgSize | 0 | 0 | This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway reply mes… |
1.3.6.1.4.1.9.10.104.1.1.1.1.27 | cmedxGatewaySctpAssocId | 0 | 0 | This object specifies the SCTP association ID associated with the H.248 association. This SCTP association ID is the index (cSctp… |
1.3.6.1.4.1.9.10.104.1.1.1.1.28 | cmedxGatewaySrvChgProfile | 0 | 0 | This object specifies the profile name used in the profile parameter of ServiceChange message to specify the attributes and behav… |
1.3.6.1.4.1.9.10.104.1.1.1.1.29 | cmedxGatewaySrvChgProfileVer | 0 | 0 | This object specifies the version of the profile indicated in cmedxGatewaySrvChgProfile. |
1.3.6.1.4.1.9.10.104.1.1.1.1.30 | cmedxGatewayMsgTokenType | 0 | 0 | This object specifies the H248 message is in short formatted PDU or long formatted PDU. |
1.3.6.1.4.1.9.10.104.1.1.1.1.31 | cmedxGatewayMgProvisionRspTime | 0 | 0 | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gatewa… |
1.3.6.1.4.1.9.10.104.1.1.1.1.32 | cmedxGatewayMgcProvisionRspTime | 0 | 0 | This object specifies the time within which to expect a Pending Response from the MGC if a transaction cannot be completed. The va… |
1.3.6.1.4.1.9.10.104.1.1.1.1.33 | cmedxGatewayMgOrigPendLimit | 0 | 0 | This object specifies the number of TransactionPendings that MG will send. Once this limit is exceeded, MG will send a Transacti… |
1.3.6.1.4.1.9.10.104.1.1.1.1.34 | cmedxGatewayMgcOrigPendLimit | 0 | 0 | This object specifies the number of TransactionPendings that MG expects to receive. Once this limit is exceeded, MG will assume … |
1.3.6.1.4.1.9.10.104.1.1.1.1.35 | cmedxGatewayDomainName | 0 | 0 | This object specifies the unique domain name to be used for each gateway link. This object is relevant only if cmedxGatewayHeader… |
1.3.6.1.4.1.9.10.104.1.1.1.1.36 | cmedxGatewayCmbDnAndPortInMID | 0 | 0 | This object specifies whether the MID should be a combination of the transport port number and the domain name represented by cme… |