This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway initiated commands.
For example, this object would limit the size of a
H248 transaction containing the media gateway
initiated ServiceChange command message.
The value of the object cannot be modified if
the entry is active.
Parsed from file CISCO-MEGACO-EXT-MIB.mib
Module: CISCO-MEGACO-EXT-MIB
This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway initiated commands.
For example, this object would limit the size of a
H248 transaction containing the media gateway
initiated ServiceChange command message.
The value of the object cannot be modified if
the entry is active.
This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway initiated commands.
For example, this object would limit the size of a
H248 transaction containing the media gateway
initiated ServiceChange command message.
The value of the object cannot be modified if
the entry is active.
Parsed from file CISCO-MEGACO-EXT-MIB.my.txt
Company: None
Module: CISCO-MEGACO-EXT-MIB
This object specifies the maximum message size on
this gateway link for a H248 transaction containing
the media gateway initiated commands.
For example, this object would limit the size of a
H248 transaction containing the media gateway
initiated ServiceChange command message.
The value of the object cannot be modified if
the entry is active.
cmedxGatewayMaxCommandMsgSize OBJECT-TYPE SYNTAX Unsigned32 (1..4096 ) UNITS "Kbyte" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated commands. For example, this object would limit the size of a H248 transaction containing the media gateway initiated ServiceChange command message. The value of the object cannot be modified if the entry is active." DEFVAL { 2 } ::= { cmedxGatewayConfigEntry 25 }
cmedxGatewayMaxCommandMsgSize OBJECT-TYPE SYNTAX Gauge(1..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated commands. For example, this object would limit the size of a H248 transaction containing the media gateway initiated ServiceChange command message. The value of the object cannot be modified if the entry is active." DEFVAL { 2 } ::= { cmedxGatewayConfigEntry 25 }
Vendor: Cisco
Module: CISCO-MEGACO-EXT-MIB
[Automatically extracted from oidview.com]
cmedxGatewayMaxCommandMsgSize OBJECT-TYPE SYNTAX Unsigned32 (1..4096 ) UNITS "Kbyte" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated commands. For example, this object would limit the size of a H248 transaction containing the media gateway initiated ServiceChange command message. The value of the object cannot be modified if the entry is active." DEFVAL { 2 } ::= { cmedxGatewayConfigEntry 25 }
cmedxGatewayMaxCommandMsgSize OBJECT-TYPE SYNTAX Unsigned32 (1..4096 ) UNITS "Kbyte" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated commands. For example, this object would limit the size of a H248 transaction containing the media gateway initiated ServiceChange command message. The value of the object cannot be modified if the entry is active." DEFVAL { 2 } ::= { cmedxGatewayConfigEntry 25 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.104.1.1.1.1.1 | cmedxGatewayMgcGroupIndex | 0 | 0 | This object specifies the MGC group parameters associated with MGC group index. Those parameters are for the communication betwee… |
1.3.6.1.4.1.9.10.104.1.1.1.1.2 | cmedxGatewayIpAddressIndex | 0 | 0 | This object specifies the media gateway IP address. It is the index of the entry in cMediaGwIpConfigTable which defines the media… |
1.3.6.1.4.1.9.10.104.1.1.1.1.3 | cmedxGatewayAssociationId | 0 | 0 | This object indicates the unique identification of the H.248 association assigned by the H.248 Stack. |
1.3.6.1.4.1.9.10.104.1.1.1.1.4 | cmedxGatewayMaxContexts | 0 | 0 | Maximum number of contexts is allowed in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.5 | cmedxGatewayMaxTermsInContext | 0 | 0 | Maximum number of terminations per context in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.6 | cmedxGatewayMgExecTime | 0 | 0 | This object specifies the interval within which the MGC expects a response to any transaction from the MG (exclusive of network d… |
1.3.6.1.4.1.9.10.104.1.1.1.1.7 | cmedxGatewayMgcExecTime | 0 | 0 | This object specifies the interval within which the MG should expects a response to any transaction from the MGC (exclusive of ne… |
1.3.6.1.4.1.9.10.104.1.1.1.1.8 | cmedxGatewayProvisionRespTime | 0 | 0 | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gatewa… |
1.3.6.1.4.1.9.10.104.1.1.1.1.9 | cmedxGatewayNumConnRetries | 0 | 0 | The number of times the media gateway retries to connect to MGC before it sends out disconnect command. |
1.3.6.1.4.1.9.10.104.1.1.1.1.10 | cmedxGatewayMaxWaitingDelay | 0 | 0 | When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the… |
1.3.6.1.4.1.9.10.104.1.1.1.1.11 | cmedxGatewayRestartDelay | 0 | 0 | This object specifies The time delay before the media gateway accept any call from MGC after it sends the command 'ServiceChange'… |
1.3.6.1.4.1.9.10.104.1.1.1.1.12 | cmedxGatewayRespRetentionTime | 0 | 0 | This object specifies the time till which the responses should be retained before they are sent if they receive a repetition of a… |
1.3.6.1.4.1.9.10.104.1.1.1.1.13 | cmedxGatewayInitialRtt | 0 | 0 | Initial round-trip time for the H.248 transaction to be responded. It reflects the network delay time. |
1.3.6.1.4.1.9.10.104.1.1.1.1.14 | cmedxGatewayInactivityTime | 0 | 0 | This object specifies the the period of silence between messages from MGC. If the period of silence exceeds the value of this obj… |
1.3.6.1.4.1.9.10.104.1.1.1.1.15 | cmedxGatewayHeaderAddrType | 0 | 0 | The address type in the H.248 message header. |
1.3.6.1.4.1.9.10.104.1.1.1.1.16 | cmedxGatewayDownServiceDelay | 0 | 0 | This object specifies the grace period before the media gateway link to be taken out of service. The value of 0 means to take the… |
1.3.6.1.4.1.9.10.104.1.1.1.1.17 | cmedxGatewayActiveMgcAddress | 0 | 0 | The address of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.18 | cmedxGatewayActiveMgcDomain | 0 | 0 | The domain name of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.19 | cmedxGatewayActiveMgcPortNum | 0 | 0 | The transport layer port number of the currently active MGC in this media gateway link. |
1.3.6.1.4.1.9.10.104.1.1.1.1.20 | cmedxGatewayStateChangeReason | 0 | 0 | This object indicates the reason for the operational state change (cmedGatewayOperStatus) in the media gateway link. mgcDirected … |
1.3.6.1.4.1.9.10.104.1.1.1.1.21 | cmedxGatewayStateChangeMethod | 0 | 0 | This object indicates the method for the operational state change (cmedGatewayOperStatus) in the media gateway link. other (1)… |
1.3.6.1.4.1.9.10.104.1.1.1.1.22 | cmedxGatewayAdminAction | 0 | 0 | This object specifies the action that users used to change the service state of the media gateway link. This object can be modifi… |
1.3.6.1.4.1.9.10.104.1.1.1.1.23 | cmedxGatewayServiceState | 0 | 0 | This object indicates current operation status of the media gateway link. inService (1) - The media gateway link is in-service… |
1.3.6.1.4.1.9.10.104.1.1.1.1.24 | cmedxGatewayDynamicTpktVersion | 0 | 0 | This object specifies the TPKT header version that is dynamically assigned based on the size of the packet presented to TCP layer… |
1.3.6.1.4.1.9.10.104.1.1.1.1.26 | cmedxGatewayMaxReplyMsgSize | 0 | 0 | This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway reply mes… |
1.3.6.1.4.1.9.10.104.1.1.1.1.27 | cmedxGatewaySctpAssocId | 0 | 0 | This object specifies the SCTP association ID associated with the H.248 association. This SCTP association ID is the index (cSctp… |
1.3.6.1.4.1.9.10.104.1.1.1.1.28 | cmedxGatewaySrvChgProfile | 0 | 0 | This object specifies the profile name used in the profile parameter of ServiceChange message to specify the attributes and behav… |
1.3.6.1.4.1.9.10.104.1.1.1.1.29 | cmedxGatewaySrvChgProfileVer | 0 | 0 | This object specifies the version of the profile indicated in cmedxGatewaySrvChgProfile. |
1.3.6.1.4.1.9.10.104.1.1.1.1.30 | cmedxGatewayMsgTokenType | 0 | 0 | This object specifies the H248 message is in short formatted PDU or long formatted PDU. |
1.3.6.1.4.1.9.10.104.1.1.1.1.31 | cmedxGatewayMgProvisionRspTime | 0 | 0 | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gatewa… |
1.3.6.1.4.1.9.10.104.1.1.1.1.32 | cmedxGatewayMgcProvisionRspTime | 0 | 0 | This object specifies the time within which to expect a Pending Response from the MGC if a transaction cannot be completed. The va… |
1.3.6.1.4.1.9.10.104.1.1.1.1.33 | cmedxGatewayMgOrigPendLimit | 0 | 0 | This object specifies the number of TransactionPendings that MG will send. Once this limit is exceeded, MG will send a Transacti… |
1.3.6.1.4.1.9.10.104.1.1.1.1.34 | cmedxGatewayMgcOrigPendLimit | 0 | 0 | This object specifies the number of TransactionPendings that MG expects to receive. Once this limit is exceeded, MG will assume … |
1.3.6.1.4.1.9.10.104.1.1.1.1.35 | cmedxGatewayDomainName | 0 | 0 | This object specifies the unique domain name to be used for each gateway link. This object is relevant only if cmedxGatewayHeader… |
1.3.6.1.4.1.9.10.104.1.1.1.1.36 | cmedxGatewayCmbDnAndPortInMID | 0 | 0 | This object specifies whether the MID should be a combination of the transport port number and the domain name represented by cme… |