Soft PVP target address if this is the calling side
Soft PVP source address if this is called side.
Atomically set ConnState, RemoteAddr
and RemoteVpi will create or delete a soft PVP.
Atomically set ConnState, RemoteAddr without RemoteVpi will
also create or delete a soft PVP but let target switch
assign the vpi.
Parsed from file CISCO-ATM-CONN-MIB.mib
Module: CISCO-ATM-CONN-MIB
Soft PVP target address if this is the calling side
Soft PVP source address if this is called side.
Atomically set ConnState, RemoteAddr
and RemoteVpi will create or delete a soft PVP.
Atomically set ConnState, RemoteAddr without RemoteVpi will
also create or delete a soft PVP but let target switch
assign the vpi.
Soft PVP target address if this is the calling side
Soft PVP source address if this is called side.
Atomically set ConnState, RemoteAddr
and RemoteVpi will create or delete a soft PVP.
Atomically set ConnState, RemoteAddr without RemoteVpi will
also create or delete a soft PVP but let target switch
assign the vpi.
Parsed from file CISCO-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-ATM-CONN-MIB
Soft PVP target address if this is the calling side
Soft PVP source address if this is called side.
Atomically set ConnState, RemoteAddr
and RemoteVpi will create or delete a soft PVP.
Atomically set ConnState, RemoteAddr without RemoteVpi will
also create or delete a soft PVP but let target switch
assign the vpi.
ciscoAtmVplRemoteAddr OBJECT-TYPE SYNTAX NsapAtmAddr MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target address if this is the calling side Soft PVP source address if this is called side. Atomically set ConnState, RemoteAddr and RemoteVpi will create or delete a soft PVP. Atomically set ConnState, RemoteAddr without RemoteVpi will also create or delete a soft PVP but let target switch assign the vpi." ::= { ciscoAtmVplEntry 18 }
ciscoAtmVplRemoteAddr OBJECT-TYPE SYNTAX NsapAtmAddr ACCESS read-write STATUS mandatory DESCRIPTION "Soft PVP target address if this is the calling side Soft PVP source address if this is called side. Atomically set ConnState, RemoteAddr and RemoteVpi will create or delete a soft PVP. Atomically set ConnState, RemoteAddr without RemoteVpi will also create or delete a soft PVP but let target switch assign the vpi." ::= { ciscoAtmVplEntry 18 }
Vendor: Cisco
Module: CISCO-ATM-CONN-MIB
[Automatically extracted from oidview.com]
ciscoAtmVplRemoteAddr OBJECT-TYPE SYNTAX NsapAtmAddr MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target address if this is the calling side Soft PVP source address if this is called side. Atomically set ConnState, RemoteAddr and RemoteVpi will create or delete a soft PVP. Atomically set ConnState, RemoteAddr without RemoteVpi will also create or delete a soft PVP but let target switch assign the vpi." ::= { ciscoAtmVplEntry 18 }
ciscoAtmVplRemoteAddr OBJECT-TYPE SYNTAX NsapAtmAddr MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target address if this is the calling side Soft PVP source address if this is called side. Atomically set ConnState, RemoteAddr and RemoteVpi will create or delete a soft PVP. Atomically set ConnState, RemoteAddr without RemoteVpi will also create or delete a soft PVP but let target switch assign the vpi." ::= { ciscoAtmVplEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.13.1.1.1.1.1 | ciscoAtmVplCastType | 0 | 0 | Vpl type is either a point to point connection or point to multipoint root or leaf. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.2 | ciscoAtmVplSpanType | 0 | 0 | Vpl span is either a transit one or a terminating one. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.3 | ciscoAtmVplConfigType | 0 | 0 | Vpl type is either a PVC, SVC, Soft PVC or Soft Passive half leg. The half leg can be set to Passive through user configuration … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.4 | ciscoAtmVplRxUpcMode | 0 | 0 | Usage Parameter Control opeartion is pass,tag,drop or local shaping at this connection. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.5 | ciscoAtmVplConnState | 0 | 0 | The connection state of this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.6 | ciscoAtmVplOamLoopbkTxInterval | 0 | 0 | Frequency of OAM loopback cells generated. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.7 | ciscoAtmVplOamSegmentLoopback | 0 | 0 | Enable segment loopback on this virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.8 | ciscoAtmVplOamEndLoopback | 0 | 0 | Enable end to end loopback on this virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.9 | ciscoAtmVplOamAisEnable | 0 | 0 | Enable Alarm Indication Signal OAM cell generation if the interafce goes down on a crossconnect virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.10 | ciscoAtmVplOamRdiEnable | 0 | 0 | Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.11 | ciscoAtmVplInstallTime | 0 | 0 | The time stamp derived from sysUpTime when this VPL gets created. The VPL entries are created/deleted as a by-product of creating… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.12 | ciscoAtmVplInCells | 0 | 0 | The total number of cells received on this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.13 | ciscoAtmVplOutCells | 0 | 0 | The total number of cells transmitted on this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.14 | ciscoAtmVplCrossIfIndex | 0 | 0 | For point to point, this is the cross-connected VPL's ifIndex of this VPL. For point to multi-point connection, this will be the … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.15 | ciscoAtmVplCrossVpi | 0 | 0 | This specifies the VPI value of the VPL to which this VPL is cross-connected. For point to multi-point connection, this is the ro… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.16 | ciscoAtmVplNextLeafIfIndex | 0 | 0 | For point to point, this is zero i.e. not used. For point to multi-point connection, this will be the next leaf VPL's ifIndex on … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.17 | ciscoAtmVplNextLeafVpi | 0 | 0 | For point to point, this is zero i.e. not used. This apply only to point to multi-point connection, this will be the next leaf VP… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.19 | ciscoAtmVplRemoteVpi | 0 | 0 | Soft PVP target VPI in calling side. 0 in called side. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.20 | ciscoAtmVplLocation | 0 | 0 | Indicate calling or called side of a soft PVP. If ciscoAtmVplConfigType is not soft then ciscoAtmVplLocation value should be igno… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.21 | ciscoAtmVplSlowRetryIntv | 0 | 0 | Soft PVP slow retry interval time in seconds. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.22 | ciscoAtmVplNumAttempts | 0 | 0 | Number of retries made to install this soft PVP connection. If ciscoAtmVplConfigType is not soft then ciscoAtmVplNumAttempts valu… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.23 | ciscoAtmVplLastReleaseCause | 0 | 0 | Value of the Cause field of the Cause Information Element in the last Release Signalling message received for this SPVP. Indicates… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.24 | ciscoAtmVplLogicalPortDef | 0 | 0 | Indicates whether the VPC at this VPL interface is an Atm Logical Port interface. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.25 | ciscoAtmVplLogicalPortIndex | 0 | 0 | The ifTable index of the Atm logical port interface associated with this VPL. Only valid if the value of atmVplLogicalPortDef is … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.26 | ciscoAtmVplUpcViolations | 0 | 0 | The total number of nonconforming cells detected by Usage Parameter Control (UPC) for cells received on this VPL. On LS1010 system… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.27 | ciscoAtmVplEpdTpdCellDrops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.28 | ciscoAtmVplEpdTpdPacketDrops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.29 | ciscoAtmVplEpdTpdPacketsIn | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.30 | ciscoAtmVplClp1Drops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.31 | ciscoAtmVplDefaultRxUpcTolerance | 0 | 0 | If the tolerance (CDVT for CBR, ABR, UBR connections, Maximum Burst Size for VBR connectons) requested for Usage Parameter Contr… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.32 | ciscoAtmVplDefaultRxUpcVbrCdvt | 0 | 0 | If the Cell Delay Variation Tolerance (CDVT) requested for Usage Parameter Control for a VBR connection is not explicitly specifi… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.33 | ciscoAtmVplLsPerVcqWrrWeight | 0 | 0 | Configure the weighting specified for a VP half-leg within a service class to make the scheduling decision among other active VPL… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.34 | ciscoAtmVplLsPerVcqTunnelIsShaped | 0 | 0 | Determines whether this is to be a -shaped- VP, per the Lightstream per-VC queueing chipset. If the value specified is TRUE, the … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.35 | ciscoAtmVplLsPerVcqXmtQueuedCells | 0 | 0 | Number of cells received on this VPL and residing on the per-connection queue. Note that this value is not valid until the VPL is… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.36 | ciscoAtmVplLsPerVcQThreshGrp | 0 | 0 | The Threshold Group to which the cell-queue for cells received by this VP are queued. This object is defined only when the switch… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.37 | ciscoAtmVplInClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear received on this VPL. Note that these cells may subsequently be discarded. This c… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.38 | ciscoAtmVplInClp1Cells | 0 | 0 | The total number of cells with the CLP bit set received on this VPL. Note that these cells may subsequently be discarded. This cou… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.39 | ciscoAtmVplOutClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear transmitted on this VPL. This counter is valid only: - if the VPL is not a Logica… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.40 | ciscoAtmVplOutClp1Cells | 0 | 0 | The total number of cells with the CLP bit set transmitted on this VPL. This counter is valid only: - if the VPL is not a Logical … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.41 | ciscoAtmVplCellDrops | 0 | 0 | The total number of cells received on this VPL, but discarded. This counter is valid only: - if the VPL is not a Logical Interface… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.43 | ciscoAtmVplClp0VcqFullCellDrops | 0 | 0 | The total number of cells received on this VPL with the CLP bit clear, discarded because the per-VC queue limit is exceeded. This … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.44 | ciscoAtmVplVcqClpThreshCellDrops | 0 | 0 | The total number of cells received on this VPL, discarded because the discard threshold (as opposed to the queue-limit) is exceed… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.45 | ciscoAtmVplLsPerVcqTunnelIsHierarchical | 0 | 0 | Determines whether this is to be a -Hierarchical- VP, per the Lightstream per-VC queueing chipset. If the value specified is TRUE… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.46 | ciscoAtmVplRxNegTraffDescrIndex | 0 | 0 | Identifies the entry in the atmTrafficDescrParamTable which contains negotiated traffic parameters applied to the receive directi… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.47 | ciscoAtmVplTxNegTraffDescrIndex | 0 | 0 | Identifies the entry in the atmTrafficDescrParamTable which contains negotiated traffic parameters applied to the transmit direct… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.48 | ciscoAtmVplSwFabOutCells | 0 | 0 | The total number of cells transmitted on this VPL by the Switch Fabric. This object is not instantiated on systems that do not ha… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.49 | ciscoAtmVplSwFabOutClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear transmitted on this VPL by the Switch Fabric. This object is not instantiated f… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.50 | ciscoAtmVplSwFabOutClp1Cells | 0 | 0 | The total number of cells with the CLP bit set transmitted on this VPL by the Switch Fabric. This object is not instantiated for … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.51 | ciscoAtmVplConnName | 0 | 0 | A human readable string that identifies this connection. This object will return a zero-length string if value is not set. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.52 | ciscoAtmVplConnType | 0 | 0 | This object represent the PVP Type for this connection. - local connection within the node - endToEnd across several nod… |