Soft PVP target VPI in calling side. 0 in called side.
Parsed from file CISCO-ATM-CONN-MIB.mib
Module: CISCO-ATM-CONN-MIB
Soft PVP target VPI in calling side. 0 in called side.
Soft PVP target VPI in calling side. 0 in called side.
Parsed from file CISCO-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-ATM-CONN-MIB
Soft PVP target VPI in calling side. 0 in called side.
ciscoAtmVplRemoteVpi OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target VPI in calling side. 0 in called side." ::= { ciscoAtmVplEntry 19 }
ciscoAtmVplRemoteVpi OBJECT-TYPE SYNTAX INTEGER(0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Soft PVP target VPI in calling side. 0 in called side." ::= { ciscoAtmVplEntry 19 }
Vendor: Cisco
Module: CISCO-ATM-CONN-MIB
[Automatically extracted from oidview.com]
ciscoAtmVplRemoteVpi OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target VPI in calling side. 0 in called side." ::= { ciscoAtmVplEntry 19 }
ciscoAtmVplRemoteVpi OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Soft PVP target VPI in calling side. 0 in called side." ::= { ciscoAtmVplEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.13.1.1.1.1.1 | ciscoAtmVplCastType | 0 | 0 | Vpl type is either a point to point connection or point to multipoint root or leaf. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.2 | ciscoAtmVplSpanType | 0 | 0 | Vpl span is either a transit one or a terminating one. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.3 | ciscoAtmVplConfigType | 0 | 0 | Vpl type is either a PVC, SVC, Soft PVC or Soft Passive half leg. The half leg can be set to Passive through user configuration … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.4 | ciscoAtmVplRxUpcMode | 0 | 0 | Usage Parameter Control opeartion is pass,tag,drop or local shaping at this connection. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.5 | ciscoAtmVplConnState | 0 | 0 | The connection state of this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.6 | ciscoAtmVplOamLoopbkTxInterval | 0 | 0 | Frequency of OAM loopback cells generated. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.7 | ciscoAtmVplOamSegmentLoopback | 0 | 0 | Enable segment loopback on this virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.8 | ciscoAtmVplOamEndLoopback | 0 | 0 | Enable end to end loopback on this virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.9 | ciscoAtmVplOamAisEnable | 0 | 0 | Enable Alarm Indication Signal OAM cell generation if the interafce goes down on a crossconnect virtual path. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.10 | ciscoAtmVplOamRdiEnable | 0 | 0 | Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.11 | ciscoAtmVplInstallTime | 0 | 0 | The time stamp derived from sysUpTime when this VPL gets created. The VPL entries are created/deleted as a by-product of creating… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.12 | ciscoAtmVplInCells | 0 | 0 | The total number of cells received on this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.13 | ciscoAtmVplOutCells | 0 | 0 | The total number of cells transmitted on this VPL. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.14 | ciscoAtmVplCrossIfIndex | 0 | 0 | For point to point, this is the cross-connected VPL's ifIndex of this VPL. For point to multi-point connection, this will be the … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.15 | ciscoAtmVplCrossVpi | 0 | 0 | This specifies the VPI value of the VPL to which this VPL is cross-connected. For point to multi-point connection, this is the ro… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.16 | ciscoAtmVplNextLeafIfIndex | 0 | 0 | For point to point, this is zero i.e. not used. For point to multi-point connection, this will be the next leaf VPL's ifIndex on … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.17 | ciscoAtmVplNextLeafVpi | 0 | 0 | For point to point, this is zero i.e. not used. This apply only to point to multi-point connection, this will be the next leaf VP… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.18 | ciscoAtmVplRemoteAddr | 0 | 0 | Soft PVP target address if this is the calling side Soft PVP source address if this is called side. Atomically set ConnState, Rem… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.20 | ciscoAtmVplLocation | 0 | 0 | Indicate calling or called side of a soft PVP. If ciscoAtmVplConfigType is not soft then ciscoAtmVplLocation value should be igno… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.21 | ciscoAtmVplSlowRetryIntv | 0 | 0 | Soft PVP slow retry interval time in seconds. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.22 | ciscoAtmVplNumAttempts | 0 | 0 | Number of retries made to install this soft PVP connection. If ciscoAtmVplConfigType is not soft then ciscoAtmVplNumAttempts valu… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.23 | ciscoAtmVplLastReleaseCause | 0 | 0 | Value of the Cause field of the Cause Information Element in the last Release Signalling message received for this SPVP. Indicates… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.24 | ciscoAtmVplLogicalPortDef | 0 | 0 | Indicates whether the VPC at this VPL interface is an Atm Logical Port interface. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.25 | ciscoAtmVplLogicalPortIndex | 0 | 0 | The ifTable index of the Atm logical port interface associated with this VPL. Only valid if the value of atmVplLogicalPortDef is … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.26 | ciscoAtmVplUpcViolations | 0 | 0 | The total number of nonconforming cells detected by Usage Parameter Control (UPC) for cells received on this VPL. On LS1010 system… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.27 | ciscoAtmVplEpdTpdCellDrops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.28 | ciscoAtmVplEpdTpdPacketDrops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.29 | ciscoAtmVplEpdTpdPacketsIn | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.30 | ciscoAtmVplClp1Drops | 0 | 0 | Never implemented. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.31 | ciscoAtmVplDefaultRxUpcTolerance | 0 | 0 | If the tolerance (CDVT for CBR, ABR, UBR connections, Maximum Burst Size for VBR connectons) requested for Usage Parameter Contr… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.32 | ciscoAtmVplDefaultRxUpcVbrCdvt | 0 | 0 | If the Cell Delay Variation Tolerance (CDVT) requested for Usage Parameter Control for a VBR connection is not explicitly specifi… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.33 | ciscoAtmVplLsPerVcqWrrWeight | 0 | 0 | Configure the weighting specified for a VP half-leg within a service class to make the scheduling decision among other active VPL… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.34 | ciscoAtmVplLsPerVcqTunnelIsShaped | 0 | 0 | Determines whether this is to be a -shaped- VP, per the Lightstream per-VC queueing chipset. If the value specified is TRUE, the … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.35 | ciscoAtmVplLsPerVcqXmtQueuedCells | 0 | 0 | Number of cells received on this VPL and residing on the per-connection queue. Note that this value is not valid until the VPL is… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.36 | ciscoAtmVplLsPerVcQThreshGrp | 0 | 0 | The Threshold Group to which the cell-queue for cells received by this VP are queued. This object is defined only when the switch… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.37 | ciscoAtmVplInClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear received on this VPL. Note that these cells may subsequently be discarded. This c… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.38 | ciscoAtmVplInClp1Cells | 0 | 0 | The total number of cells with the CLP bit set received on this VPL. Note that these cells may subsequently be discarded. This cou… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.39 | ciscoAtmVplOutClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear transmitted on this VPL. This counter is valid only: - if the VPL is not a Logica… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.40 | ciscoAtmVplOutClp1Cells | 0 | 0 | The total number of cells with the CLP bit set transmitted on this VPL. This counter is valid only: - if the VPL is not a Logical … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.41 | ciscoAtmVplCellDrops | 0 | 0 | The total number of cells received on this VPL, but discarded. This counter is valid only: - if the VPL is not a Logical Interface… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.43 | ciscoAtmVplClp0VcqFullCellDrops | 0 | 0 | The total number of cells received on this VPL with the CLP bit clear, discarded because the per-VC queue limit is exceeded. This … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.44 | ciscoAtmVplVcqClpThreshCellDrops | 0 | 0 | The total number of cells received on this VPL, discarded because the discard threshold (as opposed to the queue-limit) is exceed… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.45 | ciscoAtmVplLsPerVcqTunnelIsHierarchical | 0 | 0 | Determines whether this is to be a -Hierarchical- VP, per the Lightstream per-VC queueing chipset. If the value specified is TRUE… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.46 | ciscoAtmVplRxNegTraffDescrIndex | 0 | 0 | Identifies the entry in the atmTrafficDescrParamTable which contains negotiated traffic parameters applied to the receive directi… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.47 | ciscoAtmVplTxNegTraffDescrIndex | 0 | 0 | Identifies the entry in the atmTrafficDescrParamTable which contains negotiated traffic parameters applied to the transmit direct… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.48 | ciscoAtmVplSwFabOutCells | 0 | 0 | The total number of cells transmitted on this VPL by the Switch Fabric. This object is not instantiated on systems that do not ha… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.49 | ciscoAtmVplSwFabOutClp0Cells | 0 | 0 | The total number of cells with the CLP bit clear transmitted on this VPL by the Switch Fabric. This object is not instantiated f… |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.50 | ciscoAtmVplSwFabOutClp1Cells | 0 | 0 | The total number of cells with the CLP bit set transmitted on this VPL by the Switch Fabric. This object is not instantiated for … |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.51 | ciscoAtmVplConnName | 0 | 0 | A human readable string that identifies this connection. This object will return a zero-length string if value is not set. |
| 1.3.6.1.4.1.9.10.13.1.1.1.1.52 | ciscoAtmVplConnType | 0 | 0 | This object represent the PVP Type for this connection. - local connection within the node - endToEnd across several nod… |