This object specifies InARP Frequency in minutes.
Parsed from file CISCO-DSL-PROVISION-MIB.mib
Module: CISCO-DSL-PROVISION-MIB
This object specifies InARP Frequency in minutes.
This object specifies InARP Frequency in minutes.
Parsed from file CISCO-DSL-PROVISION-MIB.my.txt
Company: None
Module: CISCO-DSL-PROVISION-MIB
This object specifies InARP Frequency in minutes.
cdslVcClassInarp OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies InARP Frequency in minutes." ::= { cdslVcClassEntry 15 }
cdslVcClassInarp OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies InARP Frequency in minutes." ::= { cdslVcClassEntry 15 }
Vendor: Cisco
Module: CISCO-DSL-PROVISION-MIB
[Automatically extracted from oidview.com]
cdslVcClassInarp OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies InARP Frequency in minutes." ::= { cdslVcClassEntry 15 }
cdslVcClassInarp OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies InARP Frequency in minutes." ::= { cdslVcClassEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.30.1.5.2.1.1 | cdslVcClassName | 0 | 0 | This object is used to identify the vc class. |
1.3.6.1.4.1.9.10.30.1.5.2.1.2 | cdslVcClassType | 0 | 0 | This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface. |
1.3.6.1.4.1.9.10.30.1.5.2.1.3 | cdslVcClassQosType | 0 | 0 | This object specifies the QOS type of the vc class. |
1.3.6.1.4.1.9.10.30.1.5.2.1.4 | cdslVcClassAbrPCR | 0 | 0 | This object specifies Abr Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.5 | cdslVcClassAbrMcr | 0 | 0 | This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.6 | cdslVcClassAbrIORIF | 0 | 0 | This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system i… |
1.3.6.1.4.1.9.10.30.1.5.2.1.7 | cdslVcClassAbrIORDF | 0 | 0 | Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. Fo… |
1.3.6.1.4.1.9.10.30.1.5.2.1.8 | cdslVcClassBroadcast | 0 | 0 | This object indicates whether to allow broadcast or not. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.9 | cdslVcClassEncapsulation | 0 | 0 | This object specifies encapsulation method. |
1.3.6.1.4.1.9.10.30.1.5.2.1.10 | cdslVcClassMuxLinkType | 0 | 0 | This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP. |
1.3.6.1.4.1.9.10.30.1.5.2.1.11 | cdslVcClassVirtualTemplate | 0 | 0 | The virtual template number. Value zero means not configured. |
1.3.6.1.4.1.9.10.30.1.5.2.1.12 | cdslVcClassIdleTimeout | 0 | 0 | This object specifies idle timeout. |
1.3.6.1.4.1.9.10.30.1.5.2.1.13 | cdslVcClassIdleMTR | 0 | 0 | This object specifies the minimum traffic rate to keep the connection. |
1.3.6.1.4.1.9.10.30.1.5.2.1.14 | cdslVcClassILMIManage | 0 | 0 | This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.16 | cdslVcClassOamRetryUpCount | 0 | 0 | OAM retry count before declaring a VC is up |
1.3.6.1.4.1.9.10.30.1.5.2.1.17 | cdslVcClassOamRetryDownCount | 0 | 0 | OAM retry count before declaring a VC is down |
1.3.6.1.4.1.9.10.30.1.5.2.1.18 | cdslVcClassOamPvcManaged | 0 | 0 | This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.19 | cdslVcClassOamPvcLF | 0 | 0 | This object specifies the OAM loopback frequency. |
1.3.6.1.4.1.9.10.30.1.5.2.1.20 | cdslVcClassOamSvcManaged | 0 | 0 | This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.21 | cdslVcClassOamSvcLF | 0 | 0 | This object specifies the OAM loopback frequency for SVC |
1.3.6.1.4.1.9.10.30.1.5.2.1.22 | cdslVcClassProtocolIpBC | 0 | 0 | This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not. |
1.3.6.1.4.1.9.10.30.1.5.2.1.23 | cdslVcClassProtocolIpxBC | 0 | 0 | This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not. |
1.3.6.1.4.1.9.10.30.1.5.2.1.24 | cdslVcClassTransmitPriority | 0 | 0 | This object specifies the transmit priority. |
1.3.6.1.4.1.9.10.30.1.5.2.1.25 | cdslVcClassUbrPCR | 0 | 0 | This object specifies the Ubr Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.26 | cdslVcClassUbrInputPCR | 0 | 0 | This object specifies the Ubr Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.27 | cdslVcClassUbrPlusPCR | 0 | 0 | This object specifies the Ubr+ Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.28 | cdslVcClassUbrPlusMCR | 0 | 0 | This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.29 | cdslVcClassUbrPlusInputPCR | 0 | 0 | This object specifies the Ubr+ Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.30 | cdslVcClassUbrPlusInputMCR | 0 | 0 | This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.31 | cdslVcClassVbrNrtPCR | 0 | 0 | This object specifies the Vbr-Nrt Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.32 | cdslVcClassVbrNrtSCR | 0 | 0 | This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.33 | cdslVcClassVbrNrtInputBP | 0 | 0 | This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM. |
1.3.6.1.4.1.9.10.30.1.5.2.1.34 | cdslVcClassVbrNrtInputPCR | 0 | 0 | This object specifies the Vbr-Nrt Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.35 | cdslVcClassVbrNrtInputSCR | 0 | 0 | This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.36 | cdslVcClassVbrNrtInputMBS | 0 | 0 | This object specifies the Input Maximum Burst Size. |
1.3.6.1.4.1.9.10.30.1.5.2.1.37 | cdslVcClassRowStatus | 0 | 0 | This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is alw… |