This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface.
Parsed from file CISCO-DSL-PROVISION-MIB.mib
Module: CISCO-DSL-PROVISION-MIB
This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface.
This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface.
Parsed from file CISCO-DSL-PROVISION-MIB.my.txt
Company: None
Module: CISCO-DSL-PROVISION-MIB
This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface.
cdslVcClassType OBJECT-TYPE SYNTAX INTEGER { atm (1), funi(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface." ::= { cdslVcClassEntry 2 }
cdslVcClassType OBJECT-TYPE SYNTAX INTEGER { atm(1), funi(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface." ::= { cdslVcClassEntry 2 }
Vendor: Cisco
Module: CISCO-DSL-PROVISION-MIB
[Automatically extracted from oidview.com]
cdslVcClassType OBJECT-TYPE SYNTAX INTEGER { atm(1), funi(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface." ::= { cdslVcClassEntry 2 }
cdslVcClassType OBJECT-TYPE SYNTAX INTEGER { atm(1), funi(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface." ::= { cdslVcClassEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.30.1.5.2.1.1 | cdslVcClassName | 0 | 0 | This object is used to identify the vc class. |
1.3.6.1.4.1.9.10.30.1.5.2.1.3 | cdslVcClassQosType | 0 | 0 | This object specifies the QOS type of the vc class. |
1.3.6.1.4.1.9.10.30.1.5.2.1.4 | cdslVcClassAbrPCR | 0 | 0 | This object specifies Abr Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.5 | cdslVcClassAbrMcr | 0 | 0 | This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.6 | cdslVcClassAbrIORIF | 0 | 0 | This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system i… |
1.3.6.1.4.1.9.10.30.1.5.2.1.7 | cdslVcClassAbrIORDF | 0 | 0 | Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. Fo… |
1.3.6.1.4.1.9.10.30.1.5.2.1.8 | cdslVcClassBroadcast | 0 | 0 | This object indicates whether to allow broadcast or not. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.9 | cdslVcClassEncapsulation | 0 | 0 | This object specifies encapsulation method. |
1.3.6.1.4.1.9.10.30.1.5.2.1.10 | cdslVcClassMuxLinkType | 0 | 0 | This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP. |
1.3.6.1.4.1.9.10.30.1.5.2.1.11 | cdslVcClassVirtualTemplate | 0 | 0 | The virtual template number. Value zero means not configured. |
1.3.6.1.4.1.9.10.30.1.5.2.1.12 | cdslVcClassIdleTimeout | 0 | 0 | This object specifies idle timeout. |
1.3.6.1.4.1.9.10.30.1.5.2.1.13 | cdslVcClassIdleMTR | 0 | 0 | This object specifies the minimum traffic rate to keep the connection. |
1.3.6.1.4.1.9.10.30.1.5.2.1.14 | cdslVcClassILMIManage | 0 | 0 | This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.15 | cdslVcClassInarp | 0 | 0 | This object specifies InARP Frequency in minutes. |
1.3.6.1.4.1.9.10.30.1.5.2.1.16 | cdslVcClassOamRetryUpCount | 0 | 0 | OAM retry count before declaring a VC is up |
1.3.6.1.4.1.9.10.30.1.5.2.1.17 | cdslVcClassOamRetryDownCount | 0 | 0 | OAM retry count before declaring a VC is down |
1.3.6.1.4.1.9.10.30.1.5.2.1.18 | cdslVcClassOamPvcManaged | 0 | 0 | This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.19 | cdslVcClassOamPvcLF | 0 | 0 | This object specifies the OAM loopback frequency. |
1.3.6.1.4.1.9.10.30.1.5.2.1.20 | cdslVcClassOamSvcManaged | 0 | 0 | This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown. |
1.3.6.1.4.1.9.10.30.1.5.2.1.21 | cdslVcClassOamSvcLF | 0 | 0 | This object specifies the OAM loopback frequency for SVC |
1.3.6.1.4.1.9.10.30.1.5.2.1.22 | cdslVcClassProtocolIpBC | 0 | 0 | This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not. |
1.3.6.1.4.1.9.10.30.1.5.2.1.23 | cdslVcClassProtocolIpxBC | 0 | 0 | This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not. |
1.3.6.1.4.1.9.10.30.1.5.2.1.24 | cdslVcClassTransmitPriority | 0 | 0 | This object specifies the transmit priority. |
1.3.6.1.4.1.9.10.30.1.5.2.1.25 | cdslVcClassUbrPCR | 0 | 0 | This object specifies the Ubr Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.26 | cdslVcClassUbrInputPCR | 0 | 0 | This object specifies the Ubr Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.27 | cdslVcClassUbrPlusPCR | 0 | 0 | This object specifies the Ubr+ Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.28 | cdslVcClassUbrPlusMCR | 0 | 0 | This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.29 | cdslVcClassUbrPlusInputPCR | 0 | 0 | This object specifies the Ubr+ Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.30 | cdslVcClassUbrPlusInputMCR | 0 | 0 | This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.31 | cdslVcClassVbrNrtPCR | 0 | 0 | This object specifies the Vbr-Nrt Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.32 | cdslVcClassVbrNrtSCR | 0 | 0 | This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.33 | cdslVcClassVbrNrtInputBP | 0 | 0 | This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM. |
1.3.6.1.4.1.9.10.30.1.5.2.1.34 | cdslVcClassVbrNrtInputPCR | 0 | 0 | This object specifies the Vbr-Nrt Input Peak Cell Rate. |
1.3.6.1.4.1.9.10.30.1.5.2.1.35 | cdslVcClassVbrNrtInputSCR | 0 | 0 | This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR. |
1.3.6.1.4.1.9.10.30.1.5.2.1.36 | cdslVcClassVbrNrtInputMBS | 0 | 0 | This object specifies the Input Maximum Burst Size. |
1.3.6.1.4.1.9.10.30.1.5.2.1.37 | cdslVcClassRowStatus | 0 | 0 | This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is alw… |