Reference record for OID 1.3.6.1.4.1.9.10.68

parent

1.3.6.1.4.1.9.10 (ciscoExperiment)

node code

68

node name

ciscoOpticalIfCrossConnectMIB

dot oid

1.3.6.1.4.1.9.10.68

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoOpticalIfCrossConnectMIB(68)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoOpticalIfCrossConnectMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/10/68

Description by circitor

This MIB module is used to create and monitor cross-connects
(horizontal relationships) between peer interfaces on the same
network element. Vertical relationships (e.g. between lambdas
and the optical fiber in which the lambdas are carried) are
represented in the ifStackTable from the IF-MIB.

This MIB can be used to model various types of cross-connects
between peer interfaces, including time-division (e.g.
SDH/SONET, PDH), wavelength (lambda), and spatial switching
(e.g. incoming port or fiber to outgoing port or fiber).

This MIB does not apply to cross-connects between packet flows
(e.g. packets in the same forwarding equivalence class at a
MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
Path connections or ATM Virtual Channel connections), since
there are scalability issues in modeling each packet flow or
cell flow as a logical interface.

The switching element performing the cross-connect function can
be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
optical add/drop multiplexer)

Cross-connects can be created through provisioning,
automatically by the network element, or dynamically by using
control protocols (e.g. GMPLS).

The cross-connect model includes support for pairs of
interfaces used to protect each other (e.g. SONET 1+1
Automatic Protection Switching). Cross-connects to protection
interfaces may be shown in this MIB module.

Parsed from file CISCO-OPTICAL-IF-CROSS-CONNECT-MIB.mib
Module: CISCO-OPTICAL-IF-CROSS-CONNECT-MIB

Description by mibdepot

This MIB module is used to create and monitor cross-connects
(horizontal relationships) between peer interfaces on the same
network element. Vertical relationships (e.g. between lambdas
and the optical fiber in which the lambdas are carried) are
represented in the ifStackTable from the IF-MIB.

This MIB can be used to model various types of cross-connects
between peer interfaces, including time-division (e.g.
SDH/SONET, PDH), wavelength (lambda), and spatial switching
(e.g. incoming port or fiber to outgoing port or fiber).

This MIB does not apply to cross-connects between packet flows
(e.g. packets in the same forwarding equivalence class at a
MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
Path connections or ATM Virtual Channel connections), since
there are scalability issues in modeling each packet flow or
cell flow as a logical interface.

The switching element performing the cross-connect function can
be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
optical add/drop multiplexer)

Cross-connects can be created through provisioning,
automatically by the network element, or dynamically by using
control protocols (e.g. GMPLS).

The cross-connect model includes support for pairs of
interfaces used to protect each other (e.g. SONET 1+1
Automatic Protection Switching). Cross-connects to protection
interfaces may be shown in this MIB module.

Parsed from file CISCO-OPTICAL-IF-CROSS-CONNECT-MIB.my.txt
Company: None
Module: CISCO-OPTICAL-IF-CROSS-CONNECT-MIB

Description by cisco

This MIB module is used to create and monitor cross-connects
(horizontal relationships) between peer interfaces on the same
network element. Vertical relationships (e.g. between lambdas
and the optical fiber in which the lambdas are carried) are
represented in the ifStackTable from the IF-MIB.

This MIB can be used to model various types of cross-connects
between peer interfaces, including time-division (e.g.
SDH/SONET, PDH), wavelength (lambda), and spatial switching
(e.g. incoming port or fiber to outgoing port or fiber).

This MIB does not apply to cross-connects between packet flows
(e.g. packets in the same forwarding equivalence class at a
MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
Path connections or ATM Virtual Channel connections), since
there are scalability issues in modeling each packet flow or
cell flow as a logical interface.

The switching element performing the cross-connect function can
be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
optical add/drop multiplexer)

Cross-connects can be created through provisioning,
automatically by the network element, or dynamically by using
control protocols (e.g. GMPLS).

The cross-connect model includes support for pairs of
interfaces used to protect each other (e.g. SONET 1+1
Automatic Protection Switching). Cross-connects to protection
interfaces may be shown in this MIB module.

Information by circitor

ciscoOpticalIfCrossConnectMIB MODULE-IDENTITY
    LAST-UPDATED   "200203130000Z" 
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO   "Cisco Systems
                    Customer Service

                    Postal: 170 W Tasman Drive
                    San Jose, CA 95134

                    Tel: +1 800 553-NETS

                    E-mail: [email protected]"
    DESCRIPTION
        "This MIB module is used to create and monitor cross-connects
        (horizontal relationships) between peer interfaces on the same
        network element.  Vertical relationships (e.g. between lambdas
        and the optical fiber in which the lambdas are carried) are
        represented in the ifStackTable from the IF-MIB.

        This MIB can be used to model various types of cross-connects
        between peer interfaces, including time-division (e.g.
        SDH/SONET, PDH), wavelength (lambda), and spatial switching
        (e.g. incoming port or fiber to outgoing port or fiber).

        This MIB does not apply to cross-connects between packet flows
        (e.g. packets in the same forwarding equivalence class at a
        MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
        Path connections or ATM Virtual Channel connections), since
        there are scalability issues in modeling each packet flow or
        cell flow as a logical interface.

        The switching element performing the cross-connect function can
        be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
        optical add/drop multiplexer)

        Cross-connects can be created through provisioning,
        automatically by the network element, or dynamically by using
        control protocols (e.g. GMPLS).

        The cross-connect model includes support for pairs of
        interfaces used to protect each other (e.g. SONET 1+1
        Automatic Protection Switching).  Cross-connects to protection
        interfaces may be shown in this MIB module."
    REVISION "200203130000Z" 
    DESCRIPTION
        "Added two objects, coifccCcL2HAttenuation and 
        coifccCcH2LAttenuation to coifccCrossConnectTable. These 
        new objects indicate signal attenuation on a given 
        cross-connect.
        Changed coifccCcKind in coifccCrossConnectTable from
        read-only to read-create."
    REVISION "200104200000Z" 
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoExperiment 68 }

Information by cisco_v1

ciscoOpticalIfCrossConnectMIB OBJECT IDENTIFIER ::= { ciscoExperiment 68 }

Information by oid_info

Vendor: Cisco
Module: CISCO-OPTICAL-IF-CROSS-CONNECT-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoOpticalIfCrossConnectMIB MODULE-IDENTITY
    LAST-UPDATED   "200203130000Z" 
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO   "Cisco Systems
                    Customer Service

                    Postal: 170 W Tasman Drive
                    San Jose, CA 95134

                    Tel: +1 800 553-NETS

                    E-mail: [email protected]"
    DESCRIPTION
        "This MIB module is used to create and monitor cross-connects
        (horizontal relationships) between peer interfaces on the same
        network element.  Vertical relationships (e.g. between lambdas
        and the optical fiber in which the lambdas are carried) are
        represented in the ifStackTable from the IF-MIB.

        This MIB can be used to model various types of cross-connects
        between peer interfaces, including time-division (e.g.
        SDH/SONET, PDH), wavelength (lambda), and spatial switching
        (e.g. incoming port or fiber to outgoing port or fiber).

        This MIB does not apply to cross-connects between packet flows
        (e.g. packets in the same forwarding equivalence class at a
        MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
        Path connections or ATM Virtual Channel connections), since
        there are scalability issues in modeling each packet flow or
        cell flow as a logical interface.

        The switching element performing the cross-connect function can
        be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
        optical add/drop multiplexer)

        Cross-connects can be created through provisioning,
        automatically by the network element, or dynamically by using
        control protocols (e.g. GMPLS).

        The cross-connect model includes support for pairs of
        interfaces used to protect each other (e.g. SONET 1+1
        Automatic Protection Switching).  Cross-connects to protection
        interfaces may be shown in this MIB module."
    REVISION "200203130000Z" 
    DESCRIPTION
        "Added two objects, coifccCcL2HAttenuation and 
        coifccCcH2LAttenuation to coifccCrossConnectTable. These 
        new objects indicate signal attenuation on a given 
        cross-connect.
        Changed coifccCcKind in coifccCrossConnectTable from
        read-only to read-create."
    REVISION "200104200000Z" 
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoExperiment 68 }

Information by cisco

ciscoOpticalIfCrossConnectMIB MODULE-IDENTITY
    LAST-UPDATED   "200203130000Z" 
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO   "Cisco Systems
                    Customer Service

                    Postal: 170 W Tasman Drive
                    San Jose, CA 95134

                    Tel: +1 800 553-NETS

                    E-mail: [email protected]"
    DESCRIPTION
        "This MIB module is used to create and monitor cross-connects
        (horizontal relationships) between peer interfaces on the same
        network element.  Vertical relationships (e.g. between lambdas
        and the optical fiber in which the lambdas are carried) are
        represented in the ifStackTable from the IF-MIB.

        This MIB can be used to model various types of cross-connects
        between peer interfaces, including time-division (e.g.
        SDH/SONET, PDH), wavelength (lambda), and spatial switching
        (e.g. incoming port or fiber to outgoing port or fiber).

        This MIB does not apply to cross-connects between packet flows
        (e.g. packets in the same forwarding equivalence class at a
        MPLS-capable switch or router) or cell flows (e.g. ATM Virtual
        Path connections or ATM Virtual Channel connections), since
        there are scalability issues in modeling each packet flow or
        cell flow as a logical interface.

        The switching element performing the cross-connect function can
        be electrical (e.g. SDH/SONET switch) or optical (e.g. passive
        optical add/drop multiplexer)

        Cross-connects can be created through provisioning,
        automatically by the network element, or dynamically by using
        control protocols (e.g. GMPLS).

        The cross-connect model includes support for pairs of
        interfaces used to protect each other (e.g. SONET 1+1
        Automatic Protection Switching).  Cross-connects to protection
        interfaces may be shown in this MIB module."
    REVISION "200203130000Z" 
    DESCRIPTION
        "Added two objects, coifccCcL2HAttenuation and 
        coifccCcH2LAttenuation to coifccCrossConnectTable. These 
        new objects indicate signal attenuation on a given 
        cross-connect.
        Changed coifccCcKind in coifccCrossConnectTable from
        read-only to read-create."
    REVISION "200104200000Z" 
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoExperiment 68 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (2)

Brothers (115)

To many brothers! Only 100 nearest brothers are shown.