A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold.
Parsed from file CISCO-APS-MIB.mib
Module: CISCO-APS-MIB
A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold.
A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold.
Parsed from file CISCO-APS-MIB.my.txt
Company: None
Module: CISCO-APS-MIB
A count of Signal Degrade conditions. This
condition occurs when the line Bit Error Rate
exceeds the currently configured threshold.
cApsChanStatusSignalDegrades OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold." ::= { cApsChanStatusEntry 2 }
cApsChanStatusSignalDegrades OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold." ::= { cApsChanStatusEntry 2 }
Vendor: Cisco
Module: CISCO-APS-MIB
[Automatically extracted from oidview.com]
cApsChanStatusSignalDegrades OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold." ::= { cApsChanStatusEntry 2 }
cApsChanStatusSignalDegrades OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold." ::= { cApsChanStatusEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.71.1.6.1.1 | cApsChanStatusCurrent | 0 | 0 | Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prev… |
1.3.6.1.4.1.9.10.71.1.6.1.3 | cApsChanStatusSignalFailures | 0 | 0 | A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal,… |
1.3.6.1.4.1.9.10.71.1.6.1.4 | cApsChanStatusSwitchovers | 0 | 0 | The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0… |
1.3.6.1.4.1.9.10.71.1.6.1.5 | cApsChanStatusLastSwitchover | 0 | 0 | The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to th… |
1.3.6.1.4.1.9.10.71.1.6.1.6 | cApsChanStatusSwitchoverSeconds | 0 | 0 | The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of secon… |