The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will return 0.
Parsed from file CISCO-APS-MIB.mib
Module: CISCO-APS-MIB
The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will return 0.
The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will return 0.
Parsed from file CISCO-APS-MIB.my.txt
Company: None
Module: CISCO-APS-MIB
The number of times this channel has switched to the
protection line. When queried with index value
cApsChanConfigNumber set to 0, which is the
protection line, this object will return 0.
cApsChanStatusSwitchovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line, this object will return 0." ::= { cApsChanStatusEntry 4 }
cApsChanStatusSwitchovers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line, this object will return 0." ::= { cApsChanStatusEntry 4 }
Vendor: Cisco
Module: CISCO-APS-MIB
[Automatically extracted from oidview.com]
cApsChanStatusSwitchovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line, this object will return 0." ::= { cApsChanStatusEntry 4 }
cApsChanStatusSwitchovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line, this object will return 0." ::= { cApsChanStatusEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.71.1.6.1.1 | cApsChanStatusCurrent | 0 | 0 | Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prev… |
| 1.3.6.1.4.1.9.10.71.1.6.1.2 | cApsChanStatusSignalDegrades | 0 | 0 | A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured thresho… |
| 1.3.6.1.4.1.9.10.71.1.6.1.3 | cApsChanStatusSignalFailures | 0 | 0 | A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal,… |
| 1.3.6.1.4.1.9.10.71.1.6.1.5 | cApsChanStatusLastSwitchover | 0 | 0 | The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to th… |
| 1.3.6.1.4.1.9.10.71.1.6.1.6 | cApsChanStatusSwitchoverSeconds | 0 | 0 | The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of secon… |