Indicates the high watermark for the switching
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over
this object value during the polling interval.
Setting this object value to 100 would mean no
syslog message would be generated. For systems
with 3 switching buses, high watermark and syslog
will be for each switching bus.
Parsed from file CISCO-STACK-MIB.mib
Module: CISCO-STACK-MIB
Indicates the high watermark for the switching
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over
this object value during the polling interval.
Setting this object value to 100 would mean no
syslog message would be generated. For systems
with 3 switching buses, high watermark and syslog
will be for each switching bus.
sysTrafficMonitorHighWaterMark OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the high watermark for the switching bus
traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over this
object value during the polling interval. Setting this
object value to 100 would mean no syslog message would
be generated. For systems with 3 switching buses, high
watermark and syslog will be for each switching bus."
DEFVAL { 100 }
View at oid-info.com
Indicates the high watermark for the switching
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over
this object value during the polling interval.
Setting this object value to 100 would mean no
syslog message would be generated. For systems
with 3 switching buses, high watermark and syslog
will be for each switching bus.
Parsed from file cisco-stack-mib.mib.txt
Company: None
Module: CISCO-STACK-MIB
Indicates the high watermark for the switching
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over
this object value during the polling interval.
Setting this object value to 100 would mean no
syslog message would be generated. For systems
with 3 switching buses, high watermark and syslog
will be for each switching bus.
sysTrafficMonitorHighWaterMark OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object value during the polling interval. Setting this object value to 100 would mean no syslog message would be generated. For systems with 3 switching buses, high watermark and syslog will be for each switching bus." DEFVAL { 100 } ::= { systemGrp 57 }
sysTrafficMonitorHighWaterMark OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object value during the polling interval. Setting this object value to 100 would mean no syslog message would be generated. For systems with 3 switching buses, high watermark and syslog will be for each switching bus." DEFVAL { 100 } ::= { systemGrp 57 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sysTrafficMonitorHighWaterMark OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object value during the polling interval. Setting this object value to 100 would mean no syslog message would be generated. For systems with 3 switching buses, high watermark and syslog will be for each switching bus." DEFVAL { 100 } ::= { systemGrp 57 }
sysTrafficMonitorHighWaterMark OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object value during the polling interval. Setting this object value to 100 would mean no syslog message would be generated. For systems with 3 switching buses, high watermark and syslog will be for each switching bus." DEFVAL { 100 } ::= { systemGrp 57 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.5.1.1.57.0 | sysTrafficMonitorHighWaterMark | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.5.1.1.1 | sysMgmtType | 1 | 1 | Type of network management running on this entity. |
1.3.6.1.4.1.9.5.1.1.2 | sysIpAddr | 1 | 1 | This entity's IP address. |
1.3.6.1.4.1.9.5.1.1.3 | sysNetMask | 1 | 1 | This entity's subnet mask. |
1.3.6.1.4.1.9.5.1.1.4 | sysBroadcast | 1 | 1 | This entity's broadcast address. |
1.3.6.1.4.1.9.5.1.1.5 | sysTrapReceiverTable | 1 | 4 | The trap receiver table (0 to 20 entries). This table lists the addresses of Network Management Stations that should receive trap… |
1.3.6.1.4.1.9.5.1.1.6 | sysCommunityTable | 1 | 3 | The community table (4 entries). This table lists community strings and their access levels. When an SNMP message is received by … |
1.3.6.1.4.1.9.5.1.1.7 | sysAttachType | 1 | 1 | The requested concentrator attachment type. For a dual attachment concentrator which can be connected to the trunk ring, the firs… |
1.3.6.1.4.1.9.5.1.1.8 | sysTraffic | 1 | 1 | Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval. |
1.3.6.1.4.1.9.5.1.1.9 | sysReset | 1 | 1 | Writing reset(2) to this object resets the control logic of all modules in the system. Writing resetMinDown(3) to this object res… |
1.3.6.1.4.1.9.5.1.1.10 | sysBaudRate | 1 | 1 | The baud rate in bits per second of the RS-232 port. |
1.3.6.1.4.1.9.5.1.1.11 | sysInsertMode | 1 | 1 | The mode for inserting M-ports into the concentrator ring. |
1.3.6.1.4.1.9.5.1.1.12 | sysClearMacTime | 1 | 1 | The time (in hundredths of a second) since mac counters were last cleared. Writing a 0 to this object causes the mac counters to … |
1.3.6.1.4.1.9.5.1.1.13 | sysClearPortTime | 1 | 1 | The time (in hundredths of a second) since port counters were last cleared. Writing a 0 to this object causes the port counters t… |
1.3.6.1.4.1.9.5.1.1.14 | sysFddiRingTable | 1 | 4 | The fddi ring map table. This table lists the nodes in the FDDI ring(s) to which the system belongs. |
1.3.6.1.4.1.9.5.1.1.15 | sysEnableModem | 1 | 1 | Indicates whether the RS-232 port modem control lines are enabled. |
1.3.6.1.4.1.9.5.1.1.16 | sysEnableRedirects | 1 | 1 | Indicates whether ICMP redirect messages are sent or received by the system. |
1.3.6.1.4.1.9.5.1.1.17 | sysEnableRmon | 1 | 1 | Indicates whether the SNMP agent supports the RMON MIB. |
1.3.6.1.4.1.9.5.1.1.18 | sysArpAgingTime | 1 | 1 | The aging time for the ARP table. |
1.3.6.1.4.1.9.5.1.1.19 | sysTrafficPeak | 1 | 1 | Peak traffic meter value since the last time port counters were cleared or the system started (see sysClearPortTime). |
1.3.6.1.4.1.9.5.1.1.20 | sysTrafficPeakTime | 1 | 1 | The time (in hundredths of a second) since the peak traffic meter value occurred. |
1.3.6.1.4.1.9.5.1.1.21 | sysCommunityRwa | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it ma… |
1.3.6.1.4.1.9.5.1.1.22 | sysCommunityRw | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it m… |
1.3.6.1.4.1.9.5.1.1.23 | sysCommunityRo | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it ma… |
1.3.6.1.4.1.9.5.1.1.24 | sysEnableChassisTraps | 1 | 1 | Indicates whether chassisAlarmOn and chassisAlarmOff traps in this MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.25 | sysEnableModuleTraps | 1 | 1 | Indicates whether moduleUp and moduleDown traps in this MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.26 | sysEnableBridgeTraps | 1 | 1 | Indicates whether newRoot and topologyChange traps in the BRIDGE-MIB (RFC 1493) should be generated. |
1.3.6.1.4.1.9.5.1.1.27 | sysIpVlan | 1 | 1 | This entity's IP address Virtual LAN association. |
1.3.6.1.4.1.9.5.1.1.28 | sysConfigChangeTime | 1 | 1 | The time (in hundredths of a second) since the configuration of the system was last changed. |
1.3.6.1.4.1.9.5.1.1.29 | sysEnableRepeaterTraps | 1 | 1 | Indicates whether the traps in the REPEATER-MIB (RFC1516) should be generated. |
1.3.6.1.4.1.9.5.1.1.30 | sysBannerMotd | 1 | 1 | Message of the day banner which is displayed on the Command Line Interface before log in. |
1.3.6.1.4.1.9.5.1.1.31 | sysEnableIpPermitTraps | 1 | 1 | Indicates whether the IP permit traps in this MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.32 | sysTrafficMeterTable | 1 | 5 | The system traffic meter table. This table lists the traffic meters available in the system. |
1.3.6.1.4.1.9.5.1.1.33 | sysEnableVmpsTraps | 1 | 1 | Indicates whether the vmVmpsChange trap defined in CISCO-VLAN-MEMBERSHIP-MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.34 | sysConfigChangeInfo | 1 | 1 | Indicates which NVRAM block is changed by whom. |
1.3.6.1.4.1.9.5.1.1.35 | sysEnableConfigTraps | 1 | 1 | Indicates whether sysConfigChange trap in this MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.36 | sysConfigRegister | 1 | 1 | The value of configuration register that will be used by the supervisor module when the system is restarted. This MIB object is on… |
1.3.6.1.4.1.9.5.1.1.37 | sysBootVariable | 1 | 1 | A list of the system boot images in the BOOT environment variable on supervisor modules with ROMMON. The format of sysBootVariabl… |
1.3.6.1.4.1.9.5.1.1.38 | sysBootedImage | 1 | 1 | The name of the system boot image which the system booted from. This MIB object is only supported in the system with Supervisor mo… |
1.3.6.1.4.1.9.5.1.1.39 | sysEnableEntityTrap | 1 | 1 | Indicates whether entConfigChange trap in the ENTITY-MIB should be generated. |
1.3.6.1.4.1.9.5.1.1.40 | sysEnableStpxTrap | 1 | 1 | Indicates whether stpxInconsistencyUpdate and stpxRootInconsistencyUpdate traps in the CISCO-STP-EXTENSIONS-MIB should be generat… |
1.3.6.1.4.1.9.5.1.1.41 | sysExtendedRmonVlanModeEnable | 1 | 1 | Indicates whether the Extended RMON VlanMode feature is enabled or not. If it is set to enabled(1), hostTable (rmon 4) will provi… |
1.3.6.1.4.1.9.5.1.1.42 | sysExtendedRmonNetflowPassword | 1 | 1 | The password for enabling the Extended RMON Netflow feature and this object has to be set before setting sysExtendedRmonNetflowEn… |
1.3.6.1.4.1.9.5.1.1.43 | sysExtendedRmonNetflowEnable | 1 | 1 | Indicates whether the Extended RMON Netflow feature is enabled or not. Setting this object to disabled(2), will clear sysExtendedR… |
1.3.6.1.4.1.9.5.1.1.44 | sysExtendedRmonVlanAgentEnable | 1 | 1 | Indicates whether the Extended RMON VlanAgent feature is enabled or not. If it is set to enabled(1), the extended RMON will also … |
1.3.6.1.4.1.9.5.1.1.45 | sysExtendedRmonEnable | 1 | 1 | Indicates whether the SNMP agent supports the extended RMON feature. noNAMPresent(3) is a read-only value and the agent will retu… |
1.3.6.1.4.1.9.5.1.1.46 | sysConsolePrimaryLoginAuthentication | 1 | 1 | Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a console sessi… |
1.3.6.1.4.1.9.5.1.1.47 | sysConsolePrimaryEnableAuthentication | 1 | 1 | Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a console ses… |
1.3.6.1.4.1.9.5.1.1.48 | sysTelnetPrimaryLoginAuthentication | 1 | 1 | Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a telnet sessi… |
1.3.6.1.4.1.9.5.1.1.49 | sysTelnetPrimaryEnableAuthentication | 1 | 1 | Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a telnet sessi… |
1.3.6.1.4.1.9.5.1.1.50 | sysStartupConfigSource | 1 | 1 | Indicates whether the configuration file(s) specified in sysStartupConfigSourceFile will be used recurringly or not whenever the … |
1.3.6.1.4.1.9.5.1.1.51 | sysStartupConfigSourceFile | 1 | 1 | Indicates which configuration file(s) on the flash device will be used during the next system startup. If the value of this MIB ob… |
1.3.6.1.4.1.9.5.1.1.52 | sysConfigSupervisorModuleNo | 1 | 1 | Indicates the supervisor module (active or standby, if applicable) that the MIB objects sysConfigRegister, sysBootVariable, sysSta… |
1.3.6.1.4.1.9.5.1.1.53 | sysStandbyPortEnable | 1 | 1 | Indicates whether the standby port feature is enabled or not. If this object is set to enabled(1), the uplink ports on the standb… |
1.3.6.1.4.1.9.5.1.1.54 | sysPortFastBpduGuard | 1 | 1 | Indicates whether BPDU Guard for Spanning Tree Port Fast Start feature is enabled or not. If the value of this object is set to e… |
1.3.6.1.4.1.9.5.1.1.55 | sysErrDisableTimeoutEnable | 1 | 1 | sysErrDisableTimeoutEnable OBJECT-TYPE SYNTAX BITS { other(0), udld(1), duplexMismatch(2), bpduPortGuard(3), channelMisconfig(4… |
1.3.6.1.4.1.9.5.1.1.56 | sysErrDisableTimeoutInterval | 1 | 1 | Indicates the timeout interval in seconds for errdisable timeout feature. |
1.3.6.1.4.1.9.5.1.1.58 | sysHighAvailabilityEnable | 1 | 1 | Indicates whether High System Availability feature is enabled or not. If this feature is enabled, the active supervisor's layer-2… |
1.3.6.1.4.1.9.5.1.1.59 | sysHighAvailabilityVersioningEnable | 1 | 1 | Indicates whether support for supervisor software image versioning (i.e., the capability to run different images on the active an… |
1.3.6.1.4.1.9.5.1.1.60 | sysHighAvailabilityOperStatus | 1 | 1 | Indicates the operational status of High System Availability feature. If the value of this object is notRunning(2), then the reas… |
1.3.6.1.4.1.9.5.1.1.61 | sysHighAvailabilityNotRunningReason | 1 | 1 | Indicates the reason why High System Availability feature is not running when the value of sysHighAvailabilityOperStatus is notRu… |
1.3.6.1.4.1.9.5.1.1.62 | sysExtendedRmonNetflowModuleMask | 1 | 1 | Indicates Netflow Export Data (NDE) to be sent to which Network Analysis Modules (NAM) in the same chassis. If users set a bit fro… |
1.3.6.1.4.1.9.5.1.1.63 | sshPublicKeySize | 1 | 1 | Indicates public key size in bits. In write, if a key does not exist, a value between 512 and 2048 will generate a RSA public key… |
1.3.6.1.4.1.9.5.1.1.64 | sysMaxRmonMemory | 1 | 1 | Indicates the maximum percentage of the memory usage for RMON. |
1.3.6.1.4.1.9.5.1.1.65 | sysMacReductionAdminEnable | 1 | 1 | Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is administratively ena… |
1.3.6.1.4.1.9.5.1.1.66 | sysMacReductionOperEnable | 1 | 1 | Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is operationaly enabled… |
1.3.6.1.4.1.9.5.1.1.67 | sysStatus | 1 | 1 | The operational status of the system. |