This object provides the minimum partition size supported for
this device. This object is a 64-bit version of
ciscoFlashDeviceMinPatitionSize.
This object provides the minimum partition size supported for
this device. This object is a 64-bit version of
ciscoFlashDeviceMinPatitionSize.
Parsed from file cisco-flash.mib.txt
Company: None
Module: CISCO-FLASH-MIB
This object provides the minimum partition size supported for
this device. This object is a 64-bit version of
ciscoFlashDeviceMinPatitionSize.
ciscoFlashDeviceMinPartitionSizeExtended OBJECT-TYPE SYNTAX CounterBasedGauge64 ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize." ::= { ciscoFlashDeviceEntry 17 }
Vendor: Cisco
Module: CISCO-FLASH-MIB
[Automatically extracted from oidview.com]
ciscoFlashDeviceMinPartitionSizeExtended OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize." ::= { ciscoFlashDeviceEntry 17 }
ciscoFlashDeviceMinPartitionSizeExtended OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the minimum partition size supported for this device. This object is a 64-bit version of ciscoFlashDeviceMinPatitionSize." ::= { ciscoFlashDeviceEntry 17 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.10.1.1.2.1.1 | ciscoFlashDeviceIndex | 0 | 0 | Flash device sequence number to index within the table of initialized flash devices. The lowest value should be 1. The highest sh… |
1.3.6.1.4.1.9.9.10.1.1.2.1.2 | ciscoFlashDeviceSize | 0 | 0 | Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. |
1.3.6.1.4.1.9.9.10.1.1.2.1.3 | ciscoFlashDeviceMinPartitionSize | 0 | 0 | This object will give the minimum partition size supported for this device. For systems that execute code directly out of Flash, … |
1.3.6.1.4.1.9.9.10.1.1.2.1.4 | ciscoFlashDeviceMaxPartitions | 0 | 0 | Max number of partitions supported by the system for this Flash device. Default will be 1, which actually means that partitioning… |
1.3.6.1.4.1.9.9.10.1.1.2.1.5 | ciscoFlashDevicePartitions | 0 | 0 | Flash device partitions actually present. Number of partitions cannot exceed the minimum of ciscoFlashDeviceMaxPartitions and (cisc… |
1.3.6.1.4.1.9.9.10.1.1.2.1.6 | ciscoFlashDeviceChipCount | 0 | 0 | Total number of chips within the Flash device. The purpose of this object is to provide information upfront to a management stati… |
1.3.6.1.4.1.9.9.10.1.1.2.1.7 | ciscoFlashDeviceName | 0 | 0 | Flash device name. This name is used to refer to the device within the system. Flash operations get directed to a device based on… |
1.3.6.1.4.1.9.9.10.1.1.2.1.8 | ciscoFlashDeviceDescr | 0 | 0 | Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: S… |
1.3.6.1.4.1.9.9.10.1.1.2.1.9 | ciscoFlashDeviceController | 0 | 0 | Flash device controller. The h/w card that actually controls Flash read/write/erase. Relevant for the AGS+ systems where Flash ma… |
1.3.6.1.4.1.9.9.10.1.1.2.1.10 | ciscoFlashDeviceCard | 0 | 0 | This object will point to an instance of a card entry in the cardTable. The card entry will give details about the card on which … |
1.3.6.1.4.1.9.9.10.1.1.2.1.11 | ciscoFlashDeviceProgrammingJumper | 0 | 0 | This object gives the state of a jumper (if present and can be determined) that controls the programming voltage called Vpp to th… |
1.3.6.1.4.1.9.9.10.1.1.2.1.12 | ciscoFlashDeviceInitTime | 0 | 0 | System time at which device was initialized. For fixed devices, this will be the system time at boot up. For removable devices, it… |
1.3.6.1.4.1.9.9.10.1.1.2.1.13 | ciscoFlashDeviceRemovable | 0 | 0 | Whether Flash device is removable. Generally, only PCMCIA Flash cards will be treated as removable. Socketed Flash chips and Flas… |
1.3.6.1.4.1.9.9.10.1.1.2.1.14 | ciscoFlashPhyEntIndex | 0 | 0 | This object indicates the physical entity index of a physical entity in entPhysicalTable which the flash device actually located. |
1.3.6.1.4.1.9.9.10.1.1.2.1.15 | ciscoFlashDeviceNameExtended | 0 | 0 | Extended Flash device name whose size can be upto 255 characters. This name is used to refer to the device within the system. Fla… |
1.3.6.1.4.1.9.9.10.1.1.2.1.16 | ciscoFlashDeviceSizeExtended | 0 | 0 | Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-… |